Decorkrete, micro-cement coating for floors and walls

The decorative micro-cement and resin coating can be applied to walls and floors, both indoors and outdoors. Very resistant to scratches and weather, the product gives elegance and functionality to each environment, in just 2 mm thick.

[@solkim133]

the second shi..est presentation of the year..no info whatsoever.

[@nareshkumar-nc2qz]

Very nice

[@MundoDiasen]

Thank you!

[@MetisDesignAgency]

Hello, could you tell me the name of materials you use for the 2 different steps before do the microcement? Thank you

[@ridrugo182]

Did you figure this out?

[@cmr88bmx]

i guess its a primer and first layer of microcement without adding pigment

[@raymondwaton8872]

What just happened

[@peterwinter9625]

Hi, what kind of coating are you using at the last

[@jimjeninedecker4767]

I guess all that commented went directly to the company?

[@GaryYoung-eq1ph]

Can u mix in any kind of pigment

[@ashleyreynolds3110]

Hi there what primer are you using before the micro cement

[@rjaiya]

is this available in Canada ?

[@robertconde6762]

It works for exterior?

[@Diasen]

Hi Robert,
thanks for your comment.
Yes, Decorkrete is suitable for interior and exterior areas.
If you would like to use Decorkrete and then receive more information, please contact us directly at [e-mail].
Best Regards,
Diasen staff.

[@mohammadabbas7131]

❤

[@SKB-m3v]

Is this available in US?

[@AnonymousIHack]

Hey where can I buy the materials to do a job like this?

[@Diasen]

Hi George, we are glad about your interest in our solution. In which country are you located? Then we can direct you to our sales partner operating in your area. We look forward to your reply. Have a nice day!

[@tonimaria2100]

So what products have you used and how many years will the results last?

[@Diasen]

We are pleased about your interest in our Decorkrete.
Depending on the type of substrate, a specific primer is applied.
Then microcement is applied to create the decoration.
Finally, a transparent protective coat is applied.
The transparent protective layer Aquafloor Eco can be restored approximately every 8-10 years, depending on the type of use of the surface.
We remain at your disposal for any further clarification and we wish you a nice day!
Best regards,
Team Diasen

[@tonimaria2100]

I cannot see the reply for some reasons

[@sharkiekhan8662]

Can I micro cement over a painted floor?

[@flaminiafabbrizi9049]

We are pleased with your interest in our decorative solution.
In order to apply our product on already painted surfaces, it is necessary to sand the paint and check its adhesion once the sanding process is finished.
Furthermore, it would be helpful to understand the composition of the paint (generally, the product data sheet is sufficient) in order to have more useful information on the possible adhesion and compatibility of our product. In such cases, we still recommend applying our WATStop product with a yield of 1 kg/m2 before applying Decorkrete.

[@gulllllll1]

Is the fibre cement not needed over the tiles ?.

[@flaminiafabbrizi9049]

In this type of intervention, where the need is to have a homogenous surface without the joints, we propose our decorative microcement Decorkrete. In fact, the product guarantees high resistance while having a reduced thickness. In these cases, fibre cement is not needed.

[@gulllllll1]

Sorry I meant fibreglass sheet ,same as the joint tape

[@philjohnson8484]

So what happens if the tile underneath cracks?

[@kitchentimeinc]

If it cracks by deflection it wasn’t installed properly. If it cracks from an impact, it would have cracked anyway wether there was cement finish over it or not.

[@totheknee]

Then you get a crack in your tile.

[@challenger516]

You I need to sand the tile before applying the microcement?

[@oslogutt80]

No