Britax advansafix M iSize - how to fit

Поделиться
HTML-код
  • Опубликовано: 13 июн 2020
  • Showing how to fit the Britax advansafix M iSize, this fitting also applies to the Britax Advansafix 4!

Комментарии • 12

  • @Swemist
    @Swemist 2 года назад

    Best instruction so far,..hate the manufacturer's own instructions..Infinite number of models with tricky names makes me crazy already when unpacking.

  • @Hari26016
    @Hari26016 2 года назад +3

    Thank you so much, the video is really helpful 🙏

  • @rc2869
    @rc2869 2 года назад +1

    Really helpful Thank You

  • @su.sinodan
    @su.sinodan 3 года назад +1

    Thanks you very much! Was tricky...

  • @dt8079
    @dt8079 2 года назад

    Thank you

  • @TheSokoSaka
    @TheSokoSaka Год назад

    Hi, am I understanding correctly this - if child is above 102cm but under 21kg, they can not use harness? Thanks

  • @lorrainemaple6287
    @lorrainemaple6287 3 года назад

    The tether won’t turn green on my one. I can’t adjust the strap with the green indicator on so seems like it will never tighten

  • @stuartgrice5685
    @stuartgrice5685 3 года назад

    Hi just looking for a seat that we can use rear facing, you said forward facing only? But snipped this from their user guide. Do you have different information. Thanks
    2.1 Use as intended
    This child seat has been designed, tested and approved according to the require- ments of the European Standard for Child Safety Equipment (UN 129/03). It is designed to secure a child in the vehicle. It may only be used on forward-facing or rear-facing vehicle seats. It is not a toy and is not suitable for use as a seat outside the vehicle.

    • @carseatkat
      @carseatkat  3 года назад +1

      The child seat itself is a forward facing only child seat. There is no way to fit it rear facing on a standard vehicle seat.
      The user guide mentioning using it on a forward facing or rear facing vehicle seat, refers to the vehicle seat, not the child seat.
      So, if you had a vehicle that allowed you to turn the vehicle seats facing backwards, that had suitable anchorage points to secure the child seat (such as a very large people carrier/van) then you could turn the vehicle seat rear facing, and provided the vehicle manual allowed the vehicle seat to be in that position when travelling, then you can use the Advansafix on the rear facing vehicle seat - thus making a forward facing child seat, a rear facing one.
      Hope that clears it up! 😊

  • @Rigggsrv
    @Rigggsrv 6 месяцев назад

    Can you attach this seat in the front seat without ISO Fix?

    • @carseatkat
      @carseatkat  6 месяцев назад +1

      Without ISOFIX, you could only fit in the front in high back booster mode (child secured with seatbelt) and you must check your vehicle handbook to ensure the seat can be used there - even if your airbag can be switched off, there can still be restrictions on what stages can be used (EG, it isn't unusual to find harness seats approved, and high back boosters excluded due to load limiters in the seatbelt etc)

    • @Rigggsrv
      @Rigggsrv 6 месяцев назад

      @@carseatkat thank you so much