Haters gonna hate and they'll never understand it no matter how clearly you spell it out to them. I try to help educate those who don't understand, but it just doesn't soak in for most of them. "Trucks should be lifted to go mudding and rock climbing." Because everyone in the world should have the same tastes. I like me some big, lifted 4x4 action too, but when it comes down to it, I like my trucks closer to the ground. It's much easier to load 10 bags of concrete into a bed that 1' off the ground instead of one that's 5' off the ground. Good vid, bro.
Solid point, wouldn't build one for me but have greatly enjoyed helping out mates build em. And most of the time's you will fin your mini trucks are better for big load's because our hilux's also have another nick name... the rollux. nothing funnier than seeing some dumb ass with a 3" lift and a top end heavy load tip his car over at 30k's (18miles) because he tunes to fast.
Jason Stouder Different strokes for different folks. I love cruising slow n low. My lady enjoys it.. Cruise the blvd, bump some classic oldies and hit the scene with other mini truck or lowriders.
At ride height my truck is nearly a foot off the ground, nothing is different suspension wise beside the way it holds my truck up. besides leaf springs and torsion bars it uses air bags. ive hit bumps that felt a hundred feet deep lol and i have pulled it out of a ditch before. Ive drove this buger 500 miles round trips to shows before. Its all good on bumps lol.
Im not a mudding fan but i am a drifting fan. I can drift mine if its wet lol. Everyone has their taste for sure. as for pot holes i can and have hit thousands. Not sure why that would be any different between our tastes
Get rid of the stock taillights? So now that you said that you think I'm gonna invest on shaving them and going through all that trouble just cause one random guy tells me to get rid of them? No dice
Well seems if u hit a pot hole or a bump or something. I just think it rides way to low and could potentially cause front end damage side skirt damage or rear end damage. Idk lil sketchy in my book congrats tho. I wouldn't have the patience to do that to my vehicles. Lol that's what the mechanic is for. Like I said everyone likes something different.
We do the same to our Toyota hilux's (toyota pickup) they are dubed... the lowlux. Great little beast's but not for me... i enjoy the look on people's faces when i turn off the high way at 60mph and driving on the dirt next to them.
Wow. Nothin against u. Everyone has their own taste. I have 2 myself. But my trucks can go mudding. Drifting even hit something simple as a road bump. Isn't that what a truck is for? I guess ur whole idea doesn't make much since to me. But u have ur taste. I have mine
Thanks man, love your videos by the way i don't own a b series but i got a 626 that shares the same engine, so whenever you do videos about the engine i always learn a bit more.
did the video owner pass away. confused: why is everyone saying rip? His urethane front control arm bushing install on the Honda is exactly what I did after seeing his video on that install.
Haters gonna hate and they'll never understand it no matter how clearly you spell it out to them. I try to help educate those who don't understand, but it just doesn't soak in for most of them. "Trucks should be lifted to go mudding and rock climbing." Because everyone in the world should have the same tastes. I like me some big, lifted 4x4 action too, but when it comes down to it, I like my trucks closer to the ground. It's much easier to load 10 bags of concrete into a bed that 1' off the ground instead of one that's 5' off the ground.
Good vid, bro.
Damn right sir. We have the same views on that subject
Solid point, wouldn't build one for me but have greatly enjoyed helping out mates build em. And most of the time's you will fin your mini trucks are better for big load's because our hilux's also have another nick name... the rollux. nothing funnier than seeing some dumb ass with a 3" lift and a top end heavy load tip his car over at 30k's (18miles) because he tunes to fast.
Because your truck beds are still useable when you cut half of it to get the axle, gaz tank and frame into the bed? lol
Jason Stouder Different strokes for different folks. I love cruising slow n low. My lady enjoys it.. Cruise the blvd, bump some classic oldies and hit the scene with other mini truck or lowriders.
So winning. This guy rolls all these internet tough guys off like its nothing.
At ride height my truck is nearly a foot off the ground, nothing is different suspension wise beside the way it holds my truck up. besides leaf springs and torsion bars it uses air bags. ive hit bumps that felt a hundred feet deep lol and i have pulled it out of a ditch before. Ive drove this buger 500 miles round trips to shows before. Its all good on bumps lol.
You said it. For people that don't understand mini trucks.. Nice mazdizze
Thanks for the view and your opinion.
i love it. finally some one showed me how you do this. always wondered how they did this. thanks Guy.
REST IN PEACE BRO....I Love ya brotha....
Im not a mudding fan but i am a drifting fan. I can drift mine if its wet lol. Everyone has their taste for sure. as for pot holes i can and have hit thousands. Not sure why that would be any different between our tastes
Lookin good as always
Sounds real good bud!
4th question......is that your shack to the right?
I'm not sure how to respond to that level of stupidity
If it's bagged over axle there really isn't a way to make it a softer ride. Bag on bars is the way to go for comfort
Walks away like a boss
Sweet truck man love it have the same plans for my f150
It'll haul just as much as this light duty pick up states from the factory.
Nice ryde...i love it.
what air system do you run
Get rid of the stock taillights? So now that you said that you think I'm gonna invest on shaving them and going through all that trouble just cause one random guy tells me to get rid of them? No dice
Why you still have pinch welds ?
Have fun with your big trucks. Mine gets 30mpg and can haul just as much lol
Well seems if u hit a pot hole or a bump or something. I just think it rides way to low and could potentially cause front end damage side skirt damage or rear end damage. Idk lil sketchy in my book congrats tho. I wouldn't have the patience to do that to my vehicles. Lol that's what the mechanic is for. Like I said everyone likes something different.
I don't have pinch welds. I removed them when I body dropped
Are your shocks broken?
rest in peace bro..
Cee Tee he past away?
drove under a low clearance bridge...………..aired up.
Its something that a lot will never understand.
Need to do one avout getting over speed bumps haha
NICE B man i got a 87 bagged bodied...... what set up you running
Dude awesome truck.Could you do a walk around of the whole truck?
I have in a previous video. Check out my others. I have a lot lol
We're do live in AR I'm in bentonville
Squirrels in the road need to look out for this. No going under. Matter of fact, look out Nightcrawlers
Joe, what engine u got un that Mazdogg? Itch sound lovely!
Great editing. Now get rid of the factory tailights.
I have been asked these 3 questions by my boss in tge last week.... he still thinks my truck is broken.
Hell yea! Love the comments joe. Keep it real
If I bought a truck I would want it to be as big as possible. Not as small as possible. Don't understand.
That a Mazda truck?
We do the same to our Toyota hilux's (toyota pickup) they are dubed... the lowlux.
Great little beast's but not for me... i enjoy the look on people's faces when i turn off the high way at 60mph and driving on the dirt next to them.
Wow. Nothin against u. Everyone has their own taste. I have 2 myself. But my trucks can go mudding. Drifting even hit something simple as a road bump. Isn't that what a truck is for? I guess ur whole idea doesn't make much since to me. But u have ur taste. I have mine
Usually shocks don't hold up trucks" haha
Next question is why would you do that to a truck
R.i.p
Thank ye sir
What kind of exhaust you got on your truck?
sounds great!
Flowmaster. Not sure what series
Thanks man, love your videos by the way
i don't own a b series but i got a 626 that shares the same engine, so whenever you do videos about the engine i always learn a bit more.
Sweet! Glad I help out lol
R.i.p. brutha Joe
did the video owner pass away. confused: why is everyone saying rip? His urethane front control arm bushing install on the Honda is exactly what I did after seeing his video on that install.
Yes he did. Few months ago
You wouldnt have these questions if you drove a lifted truck.
Oh so I should just rip out all my bag stuff with my comfy ride and throw in overly priced hydros. Sounds simple. I'll get right on that
lol i love it
you better get on that in a hurry
Can you come to my house and fix my b22 please?
Haha..nice!
Stock engine. With a weber and flow master
my trucks got shocks in the rear but does not bounce in the rear lik urs wat makes the difference and im on bags
That wasnt bouncy, my shocks are set up to be soft. if i didnt have shocks installed i would have bounced my truck off the ground doing that lol
lol so i jus need soft shocks then lol
god sir, you realy need friend...
Perfect!
I could hardly hear
I live in Benton ar lol
But anyway, nice truck besides the color!
Why don't you put hydraulics? I would be able to stand a loud ass compressor!
Awesome! Hahaha
Stupid stupid stupid stupid people that comment on my videos.......
Lol
But I like my big dick.
Trucks fucking gay!
The idiot here is you!! Lol. Close minded dumb ass