I make the same mistake with teflon tape. I do it wrong all the time. And, like you, I get a partial unwrapping as I wind the fittings together. And, like you, my stuff STILL WORKS JUST FINE. Good job!
I loved this so much that I decided to build my own EXCEPT 10 TON!!. I've already begun, got the cylinder pump and hoses, just need hardened vise jaws. Love your videos Darek, keep it up.😎
well....we know where all the teflon tape went! :) Nice work. I never liked the hand pump, this really finishes the custom vise nicely. It just makes sense. The only thing now is to plumb a separate pedal on the floor for up and down so you don't have to lean all the way in for retraction of the ram. I'll shut up now, nice job and love your videos!!!!!
Cool invented. And what is the old drive already worn out? Something fast. He crippled the pipe, killed the plywood, instead of champagne, he washed everything with soda. ))) Celebrated.👍👍👍 Fajnie wymyślone. A jaki jest już stary dysk? Coś szybkiego. Okaleczył fajkę, zabił sklejkę, zamiast szampana umył wszystko sodą. ))) Świętowano.
Great project but just a small tip, when applying Teflon tape flip the roll over and run the tape off the back holding the roll between your index and middle finger to keep tension as you apply, much easier and you get much better job in less time
Urządzenie dobre. Sam bym nie wymyślił pewnie takiego imadła. Jedyne czego mi brakuje to wyłącznik awaryjny (grzybka) odcinajacy zasilanie z pompy, w razie "W", ja to mam obawy przy takich urządzeniach. No i mi manometru szkoda , przeniósł bym go na ścianę. Ale to tylko kosmetyka. Pozdro
Personally I would have mounted the pressure gauge on a mount at the rear of the bench so that you could see it better and less chance of it getting bashed .
Идея хорошая...если все предметы там надо фиксировать намертво,ну в если необходимо что то аккуратно зажать или запрессовать подшипник?-руками же не определяешь нагрузку в ньютонах или атмосферах. Думаю,рядом нужны и обычные тиски😁😁😉😉👍👏👏
@@ЕвгенийБ-н4я ну тут же не про "нужна не нужна", а про удобство в работе. Ну такими тисками удобней, быстрей и приятней работать, чем традиционными, не правда ли? Это всё равно что говорить нахера мне мерседес, я буду на жигулях гонять - в мороз мороки меньше! :))
Now that's funny ☺️ Y ?? Cuz I just watched u build that last night & commented on I'll take mine with foot pedal and auto return !!!! And .... Presto !!!!! Here it is !!!!! AGAIN, great build. Great vid. Sad, u can't make me one ☹️ ... Can you just imagine the shipping cost ?? 🤪🤭
fascinating how all those connectors fits together. in my case that means about 150miles multiple trips to and fro a hardware store thanks to superior imperial system
If I needed a hydraulic vise I'd use QDs so I could quickly switch between the the foot pump and the pneumatic hydraulic unit. In another life I used hydraulic punches to make holes on the front of electric control panels. QDs were a necessity as there were two hydraulic punches but only one pneumatic hydraulic operator.
I didn't read all the comments so someone may have already said this, but I'd want to see the gauge in front of me or at least be able to look down and see the dial. Maybe make an angled bracket to mount the dial onto. Anyway, just a thought. Well done beside that in my opinion.
Watching you wrap PTFE tape I could not help noticing you hold the spool the wrong way, try doing it your way with a fitting then turn to reel around so it's comming what seems to be backwards. You will find you can create some good tension on the tape rather than the spool getting out of control.
Every time I make/modify something and start to get all proud of myself, I watch one of your videos and then that's just not a problem any more.
Coraz lepsze te imadło. Chrzest colą też zaliczony. Gratki za dobrą robote.
Как всегда достойные самоделки, хотя и в некоторых случаях лучше чем заводские! 👌👍👍👍
Always better than the factory.
@@Paulman50 I agree!👍
I make the same mistake with teflon tape. I do it wrong all the time. And, like you, I get a partial unwrapping as I wind the fittings together. And, like you, my stuff STILL WORKS JUST FINE. Good job!
Druga odsłona niewiem czy nie lepsza od pierwszej 💪💪💪
Robota na medal bez zbędnego pier...lenia się! 👍👍👍
All your builds are heavy duty I love em!
Wish there was a love button not just a like. I want one of these badly. No matter of fact I NEED one of these. Brilliant work.
+
gary hart
Hart by name heart by nature. Now you have been hearted by Made in Poland.
I loved this so much that I decided to build my own EXCEPT 10 TON!!. I've already begun, got the cylinder pump and hoses, just need hardened vise jaws. Love your videos Darek, keep it up.😎
That's great! Good luck! :)
Yes folks it comes with the crush-o-meter!
Nice finish to a great build, thanks for sharing.
Cheers
Prawda jest taka, że lenistwo jest motorem postępu. Czego tylko czlowiek nie wymyśli, zeby mniej i łatwiej pracować...😉 Świetna robota. Powodzenia
Te imadło ma jeszcze jedno zastosowanie można je używać zamiast prasy
Совершенству нет предела!Красавчик!😉👍
Очень классно!!! видел первую модификацию а сейчас уже станок))
Man, I was already going to add pneumatic over hydraulic power to my shop press, and now I have to build one of these too.
Kolejny genialny upgrade !! a test z puchą coli to wiśienka na torcie , Szacun ,dobra robota
Uwielbiam człowieku Twoją robotę. Jesteś dla mnie lepszym, polskim wcieleniem MakeItExtreme... :)
your works are perfect, i love watching your videos so please continue with your work, hugs directly from Brazil
Thats a nice watch maker vice you got there . . .
Perfect for making a low-profile Rolex!
well....we know where all the teflon tape went! :) Nice work. I never liked the hand pump, this really finishes the custom vise nicely. It just makes sense. The only thing now is to plumb a separate pedal on the floor for up and down so you don't have to lean all the way in for retraction of the ram. I'll shut up now, nice job and love your videos!!!!!
The first project was very beautiful and good and successful but the second project upgrade is even better
Podziwiam Cię że Ci się chce tak dłubac 😁
Też kiedyś taki byłem aż skończył się czas na takie akcje i kupuje gotowe.
этим мужчиной может гордиться не только Польша
wow! looks powerful enough to make a forging press!
Really, you made this beast a killing machine.
Apart than being a great upgrade ... count your fingers! :D
Шикарно получилось !!!
Cool invented. And what is the old drive already worn out? Something fast. He crippled the pipe, killed the plywood, instead of champagne, he washed everything with soda. ))) Celebrated.👍👍👍
Fajnie wymyślone. A jaki jest już stary dysk? Coś szybkiego. Okaleczył fajkę, zabił sklejkę, zamiast szampana umył wszystko sodą. ))) Świętowano.
Awesome upgrade bro :D
Thanks man! :D
Hahahahaha yeah! I agree so much.
Now you need to make it pivot. Awesome work.
Fajna modernizacja, a emocje do samego końca. Pozdrawiam Serdecznie
Mr. Cola Buster, hats off, in my humble opinion super made
Watched the building of it thinking man need a powered pump. Bam next video! I want one! Could manufacturer and sell these.
Beautiful build you are truly a craftsman
I’m so impressed. Thank you! You give me confidence to go that next step forward.
Great project but just a small tip, when applying Teflon tape flip the roll over and run the tape off the back holding the roll between your index and middle finger to keep tension as you apply, much easier and you get much better job in less time
Awesome upgrade!
Powerful device!
This is super badass I want one for my shop but I don't have the materials to put it all together right now
Now thats what we call " Skookum as frig".
All hail the holy AvE!!!
Praise be to AvE. Go uncle bumblefuk
I thought it was awesome before, now it's just perfection
Your job is very good and clean.
I greet you from Algeria.
You are a very smart and practical man!!
Nice upgrade!
a beautiful vice! I wish I had one!
Urządzenie dobre. Sam bym nie wymyślił pewnie takiego imadła. Jedyne czego mi brakuje to wyłącznik awaryjny (grzybka) odcinajacy zasilanie z pompy, w razie "W", ja to mam obawy przy takich urządzeniach. No i mi manometru szkoda , przeniósł bym go na ścianę. Ale to tylko kosmetyka. Pozdro
Good work! 👍🏻I would add a security stop button to the system in case of emergency. Greetings from Mexico.
No Panie, teraz to poszalejesz 😀 Ale luzowanie to ma błyskawiczne, dobrze że w te stronę a nie przy zaciskaniu 😂 Dobra robota 👏👍
Personally I would have mounted the pressure gauge on a mount at the rear of the bench so that you could see it better and less chance of it getting bashed .
We did this at work years ago. It is very nice.
Jest potencjał
Pozdrawiam.
O teste da Coca cola eu não faria,... Sujou tudo 😬
Bom trabalho campeão 👍🏽💪🏽👏🏽
the best diy that i see! you great man! the best diy that can really help! perfect idea!
Superbe modification !
Идея хорошая...если все предметы там надо фиксировать намертво,ну в если необходимо что то аккуратно зажать или запрессовать подшипник?-руками же не определяешь нагрузку в ньютонах или атмосферах.
Думаю,рядом нужны и обычные тиски😁😁😉😉👍👏👏
Так у него же вроде давление табло приличных размеров которое прикрученое, показывает) Так что как по мне так достаточно точно можно дозировать)
Идея хорошая. Только всё это у него в мастерне стоит. А как оно на морозе работать будет?
@@ЕвгенийБ-н4я а у тебя тиски обычно на улице стоят? :)))
@@Fackstrort Ну большие так то да. Под навесом. Средние и маленькие в гараже. Только им гидравлика нах не нужна.
@@ЕвгенийБ-н4я ну тут же не про "нужна не нужна", а про удобство в работе. Ну такими тисками удобней, быстрей и приятней работать, чем традиционными, не правда ли? Это всё равно что говорить нахера мне мерседес, я буду на жигулях гонять - в мороз мороки меньше! :))
Watched this video now again, just wonderful - keep on doing!
крутые тиски! реально круто получилось! идейно
Now that's funny ☺️
Y ??
Cuz I just watched u build that last night & commented on I'll take mine with foot pedal and auto return !!!!
And .... Presto !!!!!
Here it is !!!!! AGAIN, great build. Great vid.
Sad, u can't make me one ☹️ ... Can you just imagine the shipping cost ?? 🤪🤭
Super koncept! Gratuluję!
Welcome to the Hydraulic Press Channel! :D
That’s what I’m talking about... Sweet upgrade! Just watch those fingers lol
Never have I ever seen someone use this much thread tape. I counted 7 layers lol
People often use too LITTLE.... only 1-2 times around. MUST USE MORE! PTFE = Plenty of Tape, Fully Enveloped
Wow, you've made something great. That's great.😁👍
Fajneee i przydatne,w sumie to już takie pół imadło pół prasa,albo imadło na sterydach
fascinating how all those connectors fits together.
in my case that means about 150miles multiple trips to and fro a hardware store thanks to superior imperial system
Poland is the best country for DIY engineering in Europe!
If I needed a hydraulic vise I'd use QDs so I could quickly switch between the the foot pump and the pneumatic hydraulic unit. In another life I used hydraulic punches to make holes on the front of electric control panels. QDs were a necessity as there were two hydraulic punches but only one pneumatic hydraulic operator.
I didn't read all the comments so someone may have already said this, but I'd want to see the gauge in front of me or at least be able to look down and see the dial. Maybe make an angled bracket to mount the dial onto. Anyway, just a thought. Well done beside that in my opinion.
Jest moc.
Super. like) Brakowało tylko próby ze zgniatanym udkiem od kurczaka. Albo palcem po piwku na warsztacie.
When you have the right knowledge and tools, everything is possible :D
МАЭСТРО!!!!
"ANTS!!! Is that what you want? Because that is how you get ants!"
Top Draw comment Daniel My Son
Watching you wrap PTFE tape I could not help noticing you hold the spool the wrong way, try doing it your way with a fitting then turn to reel around so it's comming what seems to be backwards. You will find you can create some good tension on the tape rather than the spool getting out of control.
U and make it extreme are the best projects to ever
Very good 2x !!!
Always impressive work! Keep it up
O upgrade ficou show parabéns.
You are very good. I really admire.
Piękna robota.
Jaki koszt pompki hydraulicznej?
Podpinam się do pytania
You are legend mate.
i wouldnt follow AvE`s advice on this one :P
wahahahaha I had to think on that for a bit.... haha
How did you purge gas from the hydraulic lines? It seems bubbles would rise to the vice. Do you have a purge valve in the top of the vice cylinder?
You made a hydraulic press into a vise lol... Looks great
Fantastic work, dude! Really amazing! 😃
You are professional. You are the best. Man. .Osama from yemen. 😎😎😎
Outstanding!
Nicely done!!!
Great upgrade. 👍👍
woa you are fantastic
Great job man you're genius
Brave homme.
I believe you, it works! Stop killing things with it. Lol
A banner ad pops up when you put words on the screen. Every time. Can't close it fast enough to read what you wrote. Good job
Вот это я понимаю мощь!
Dobra robota 👊🏆
I like polish camo!
Сила сильная во👍🏻
very good it was better than the other vise
Wow amazing 😮
Just need to figure out a swivel base for it and it would be a complete package.