Toyota Highlander (Limited, XLE) Roof Cross Bar Install 2014 - 2019
HTML-код
- Опубликовано: 8 сен 2024
- 2014-2019 Toyota Highlander XLE, Limited, SE Roof Rack Cross Bar (Black)
US: amzn.to/2scQLSd
CDN: amzn.to/372sDEq
2014-2019 Toyota Highlander XLE, Limited, SE Roof Rack Cross Bar (Silver)
US: amzn.to/2ksy8oX
CDN: amzn.to/37cVG8j
OEM Toyota Highlander LE Cross Bar 2014-2019 (Black)
US: amzn.to/3fzSKqk
CDN: amzn.to/2DT8Ltz
Toyota Highlander LE Cross Bar (Black)
US: amzn.to/3jazcei
CDN: amzn.to/3hRLwj0
========
TOOLS:
Car Panel Removal Tool Kit 18pcs
US: amzn.to/2KO7688
CDN: amzn.to/2YLH3bz
EPAuto 1/4” & 3/8” Socket Set - 69 Pieces
US: amzn.to/2Gnwb7k
CDN: amzn.to/2lp5t8f
Allen Wrench Set - Metric & Standard
US: amzn.to/2Yfcidm
CDN: amzn.to/2Yeu6oV
Gorilla Crazy Glue:
US: amzn.to/2UZ5Ogr
CDN: amzn.to/2zJkJE8
=======
Features:
- Fit Highlander XLE, Limited, SE and Hybrid models.
- High grade aluminum constructed. Load capacity 150 lbs evenly distributed.
- Aero-dynamic in shape to minimize wind noise.
- Bolted directly to roof
========
In this video, I will show you how to install the roof cross bar on a 2014 - 2019 Toyota Highlander (XLE, Limited, SE trim). The install process is not difficult and takes about 30 minutes. Follow the steps shown in this video. Also check out the purchasing links above.
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com...
CDN: www.amazon.ca/...
=======
Support Dial2Fast on Paypal
www.paypal.me/...
Support Dial2Fast on Patreon
/ dial2fast
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime
US: amzn.to/31i05mP
CDN: amzn.to/3kG0D0R
Try Amazon Prime 30-Day Free Trial:
US: amzn.to/2S3GjHI
CDN: amzn.to/3kG0D0R
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.
I just ordered a set. The dealer wanted $200 to install it. No thank you!! I can do this myself. Thank you sir for sharing your video of the install. You helped us save food and gas money.
Rattling and wind noise may occur, really pay attention to torque specs - our dealer installed roof bars keep coming loose and they are not doing anything to help.
Hallelujah! I’m so thankful that you put this on RUclips, sir. The Toyota dealer told me it would be 1200 dollars to get a roof rack installed. They are 120 dollars on Amazon and I didn’t know I could do it on my own like this, I had no idea that this ports already had a hole in them for drilling.
May God bless you my friend. You just saved me a bunch of money.
Very good to hear you found my video helpful. I am sure you can install it yourself. Cheers!
Thanks for the video. We installed ours today in about 40 minutes exactly as you showed.
Just bought these crossbars for my 2014 XLE. Very excited, and this video was a big factor in my decision to buy it. Thank you!
Me too lol
I put mine on my roof rails in about an hour, including readjusting the bolts. Your video was exactly on point. Thanks!
Great to hear. Thanks for sharng your experience.
Thanks very helpful video!In Toyota Center they said is very hard to install ,it will be cost a lot of money!This is crazy ,I just saw this video and I spend 20 min to install!)))
I purchased a different brand, the covers were already attached. This video was very helpful and professional. Thank you.
Thanks for the video! I had some additional parts in my kit. One piece locks the bolt from being able to loosen. The other piece keeps the end caps from flying away if they get blown off driving down the road. 30 min install great video.
Great video. It took me 22 minutes. Just to note, the top of the base on each side of the crossbar are marked with an arrow that points to the front. The sticker on my crossbar that says "This side faces front" was incorrectly placed on the wrong side! I caught this mistake because I saw the arrow on the top of the base pointing backwards. I would have easily completed the install in under 20 minutes if I did not have to remove and reposition the errantly-marked crossbar.
Thank you for this my brother. Really appreciate it. My family will be buying and installing to enhance our travels. Cheers bro! 💪💯💜
Thank you for the video. I was struggling to install one that was supposed to fit my model but clearly doesn't and I can tell the one you are doing is the right one. Ordered through your link so I know I get one that will work and the other goes back.
your video was perfect I was looking at other options but this is so much better and actually cheap to buy thank you
Thank you. I’m thinking about purchasing some roof racks within the upcoming two weeks.
Nice very professional video. Plus extremely easy to follow. Thanks.
On my roof rack the rail was held to the mounting bracket with Torx Bolts. Probably a t6 maybe t8. Please make sure before you start using a allen wrench. It's easy to round out a Torx bolt with an Allen Wrench.
The OEM Toyota bars come with a bit more hardware and complexity. The fit at those gaskets is also spot on. Nearly triple the price, but I guess you get what you pay for.
A high quality video. Instructions were very clear.
Excellent Video...well done. Saved my $80.00 just for the dealer to look at my roof rack that was rising on all front parts of both corss bars. How to uninstall the end caps would have a bonus detail! Thank you very much!
Thank you for this informative step-by-step video. Very well done!
Awesome! This was very helpful! Thank you so much for making this!
Thank you, it went on without any trouble. Great video.
This rail kit is the Best because you can refer to this video when you do the installation.
Where do you order the kit?
Just installed the kit with ease following your directions. I did find it hard to tighten up the set screws as its hard to see up into the rail. I actually liked the tool included to tighten the bolts even though I had a rachet/socket. The Allen wrench ok. Thanks
Good afternoon, I just purchased this system from Toyota today and it will arrive early next week. My wife dies not have the limited edition so she has what looks like rubber gaskets on the roof rail. Did you have this or did you have the one in this video? I will be installing it myself. Thank you, I appreciate it
What a professional video. Thanks for all the clear info. Subbed 👍🏼
The width adjustment on the OEM crossbar I purchased were T- 25 bolts. No T-25 wrench was included in the kit
The moonroof is nice on the limited
Great reference video, easy to watch!
Thank you very much. This was a great video. I ordered the black Xbars, and got them installed. I have one question for you or anyone who has installed these. I also notice small gaps against the chrome rails, and wondered if anyone has had trouble w/ leakage? Am considered putting some silicone around the bases just to be sure. Thoughts?
Professional video THANKS
The only problem with the Highlander mounting points is they're fixed and the cross bars end up too close together to carry anything useful. This isn't a problem on vehicles that have raised roof rails. Unfortunately Highlander comes with flush rails. Something to keep in mind when buying cross bars for this vehicle.
What brand are these can we have a link for these bars?
Just ordered some and should be here today, this video was helpful to give me a heads up. Thanks
I bought a cheaper model of these and returned them because the gaskets didn't fit and then found out they were only for the lower model Highlander (both sets of hardware were included though). Directions did not use gaskets for my model, but that wasn't good b/c rain would flow down in there. The bars were fine, just couldn't figure out why no gaskets? So returned them. I hope these cross bars are better.
Very helpful. Thank you!
What are the other smaller plastic cover plates for near the rear and front of the silver top rail. The two cross bars that you installed are much too close together for my 17 ft. canoe.
Thanks I'm gonna use this to take off those ugly bars off my car lol . I've never used them and will never use them.
The double recess mounting points are very close together. No good for longer items or stability. Can bars be mounted to the single recess mounting points?
I have this same question. Roofnest rooftop tents said 30 inches is too close for third tents.
I took mine off they look like an after thought and I'm getting 4 more mpg
That's significant
@@thainsworth67 yup it can get 27 mpg 😂
Creative Dragon wait, it increases mileages?!
Thanks, Very helpful.
Do you think it's possible to take the roof rack off and on when needed? I need it for traveling, but not thrilled to have the rack on all the time.
Great Video! Thank you!
What’s the difference in between using the horizontal and vertical roof rack mount? I see cars have different t setup and don’t know why
how can you prevent theft on the cross bars?
I didn't get the square aluminum spacer for the bolts. Are these really important,?
What are the third set of covers for on the rails? Are they for different installation locations? Thank you
How is air resistance for those bars? Do they make loud noise?
Great video! How would you tie something down across these (like lumber or a Christmas tree)? Is there an anchor point somewhere for rope or bungee cords?
No anchor, just wrap the rope or tie down around it.
Now you need some running boards to kick it off.
Excellent video. Thx.
Ordered but the link sent me a differrent bar that has a j-hook assembly. Totally wrong assembly. Oh well. Will send back. Bummer.
Thanks for the video!
What kind of tool did you say to remove the covers?
Thank you...
Can someone tell me the part number on those crossbars for 2018 limited pls
Mine didn't come with that middle metal spacer (the long one that the screw goes into). I contacted the supplier and they claimed I didn't need it. But when I installed these I saw the silver plastic part of my roof go down. It wasn't flush anymore with the other silver piece. Don't know if that is normal.
Thank you
I have a question. Can the length of the cross bars be adjusted? The space between the front and back is small. There is a small cap further back on the roof? Is that for a different length in the cross bar? There isn't much room to tie anything to the top with these cross bars so close.
They are a set distance. the small caps front & rear conceal the roof rail bolts.
@@Summerguy24 Thanks Craig, I had the same question as Tess above, about possibly using the small rear cap to add a third crossbar....Guess Not !!!!
Do the end caps just pop off when you take off the crossbars
Thank you!👍
Dial2Fast uploads I watch and like.
Thanks for your support!
Nice video .. Thanks
Do you know the name of the wrench/tool company that comes with the roof rack kit? I actually referred it to using a ratchet. Thanks Mike
How is kluger roof weight thx😁
I wanted to expand my cargo room by moving the bar to the back of SUV. It appears I have to purchase a different bar to place in the back?
did you ever get a response to this?
Thank You!!!
How about the rails? I don't have rails on my 2014 hibrid
So how do you secure something to the ccross bars ie Christmas tree, canoe…?
Where did you buy this particular set of roof racks? Nice job
Why do most of them say they only fit XLE and LE models and not the SE? It's the same mounts.
does anyone know what the static weight capacity for the toyota highlander limited is?
the dynamic load is 165lb on these but i am wondering if one could install a roof tent on the highlander limited and sleep in it with two people?
has anyone experience with that?
My crossbars didn't come with spacers :(
How much have u paid for roof racks? Thanks
I've lost the mounting screws and Toyota doesn;t have them and can't tell me what size they are. Can you tell me what size the bolts screws are for the XLE model?
8.8 M
Is the front bar higher than the back?
Any wind noise?
Mine were installed and came with my 2018 XLE - I'm having repeated wind noise issues and my dealer has a very low customer satisfaction quotient to repair the issue.
👍
Bro where did you ordered. Website please
Link in description.
Anyone knows the maximum weight they can hold
Per the provided Amazon link, it's "Load capacity 150 lbs evenly distributed"
Per Toyota, max weight is 165lbs.
Directions say 150, but the sticker on the bars say 165. I'll er on the side of caution and just go 150.
why do peope put these on
So you can put a roof carrier on top which is what the owner of this vehicle did. You can also put canoe or ski rack on top.
You're really asking that question? Obviously to carry cargo on the roof.
ruclips.net/video/rHZcf-aj6JE/видео.html
Can the sticker on the rails be removed? Thanks
Yes all the stickers can be removed.
Thanks!!
Why would you remove them? they are there for the sole purpose of installing the bars correctly.
I bought the same one for my 2017 Highlander, it doesn't fit in.
May have to loosen the set screws under the rails to adjust their length.
Professional video THANKS