30Hp 440cc Duromax On A Small Go Kart
HTML-код
- Опубликовано: 6 фев 2020
- Today we finish up the test kart frame, install the built 440cc Duromax, mount the brakes, install a key switch, and take it for a quick off road test. We will get it out and do a ride video next week on this kart. Don't forget to like, comment and subscribe for more!!!
Duromax 20% Discount Code RBG720 for July 2020 - bit.ly/3894jRJ
Parts Used On This Engine -
Duromax 440cc Engine - bit.ly/2X0FDG2
440cc Stage 2 Kit - bit.ly/34iuHpg
Top Plate - bit.ly/34aphg0
34mm Round Slide Kit - bit.ly/2PeTnL1
34mm Flat Slide Carb - amzn.to/34g5qvK
Intake Manifold - Coming Soon
Stainless Header - bit.ly/35gNC5g
Chromoly Push Rods - bit.ly/36tsskn
Ratio Rockers - Coming Soon
Head Work - lfrsmallengine@gmail.com
Parts Used On This Chassis -
Engine Plate - bit.ly/2rxt1KX
1” Axle - bit.ly/2p6ut6d
Axle Bearing - bit.ly/2WclT1C
Pedal Kit - bit.ly/2H39QNx
Pedals - bit.ly/2KxVw1G
Pedal Stop - bit.ly/2S8H6td
1” Lock Collars - bit.ly/2RFcca8
Brake Disk - bit.ly/2JjSOfQ
Brake Hub - bit.ly/31Pskt2
Sprocket - bit.ly/31LdL9w
Sprocket Hub - bit.ly/340rc7m
Brake Caliper - bit.ly/2sTj0st
Brake Master Cylinder - bit.ly/2TUFfJU
Right Hand Tie Rod Ends - bit.ly/30PVt8e
Left Hand Tie Rod Ends - bit.ly/2vkJMuL
Tie Rods - bit.ly/2sPMS94
Check Out Our Merch - bit.ly/33YbmtO
Watch Us On Roku - bit.ly/30lHmaA
Check Out Go Power Sports for all your Go kart needs!
goo.gl/OoWVDK
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Welding Table - goo.gl/V9dHPp
Everlast Welder - goo.gl/8DRgZe
DuroMax Generators, Pressure Washers, & Engines goo.gl/GfBpNp Use 20% code RBG720 on ALL DuroMax products for July 2020.
Tube Buddy Affiliate- www.Tubebuddy.com/RBG
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Facebook - redbeardsgarage
Instagram - redbeardsgarage
Google+ - redbeardsgarage
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #RedBeardsGarage 
Развлечения
Get up and gone! Great power plant.
I didn't think it was possible but you got me even more excited about the 390 build for my Manco "Farm Kart".
Please,yamaha 40 hp Enduro_ouatboards engine
I know this is from over a year ago but I’d love to see a mini turbo on that
When I was a kid we used to put dirt bike engines in go karts. The craziest (most dangerous) one was a Honda Odyssey with a 490cc Maico engine.
I've built those engines and it has more than enough power for big buggies!! I can't imagine how that feels on that tiny kart?!? That is GNARLY!!! And yes, they are VERY loud lol
You should build a small oval flat track for those no suspension builds
I have a no suspension kart and I agree lol
yes, easy as pulling a drag around a full day with an ATV or something.
That looks like SO MUCH FUN!
Also, good job keeping things neighborly with your neighbor. Whether or not he had a right to be upset, kudos to you for going out of your way to be considerate. Go RBG Nation!!
for the twin engine you could do an independent rear suspension like rather be welding did on his twin engine
Thanks for the Discount Code!!!! I just ordered a Duromax 440CC for my boys Honda Odyssey FL250’ This thing is gonna be awesome!
Make sure to upload a video of it. I'm trying to decide between a Predator 420 and a Duromax 440 for a very similar build.
I got a predator 420 in an odyssey fl250. Fastest I've gone in it was 32mph with a GPS app..still gott put the bigger carb jet in it and button up a few things battery box etc.
Piece of advice for anyone building a shop, build the absolute biggest you can afford because you will find a way to fill it up and you will want more space. We finally got a shop built a couple years ago and at the time I thought I was right at what I could afford budget wise. Afterwards I realized I could have afforded to go a little bigger and wish I had.
Must put smile on your face when you see your boy smiling ear to ear. Nice
That's my fav kind of kart, small, big engine and ground clearance
I love the look of that kart with them tires
I wish I lived closer to Tennessee!! That would awesome to meet you guys, and hang out with everyone!
Holy Swiss Rolls ! That thing slings the big red bearded guy🧔 around like easy peasey 🤓and that cam is a choppin 👍 nice
Love it! Loud and proud👍👍
Nice lathe in the corner there. Those are super handy. Once I knock out a couple other projects I'm going to get mine up and running.
Mr. Red Beard! DUDE!!! I have to thank you soooo much! The discount code got me $75 off a Duromax 440, which I was thinking of a Predator 420, but this engine has more power and was actually cheaper than the 420, even on sale at $299 I would have had to pay local tax! So $303 for the Duromax 440 shipped in less than a week to my door! Going to put that monster on a Silver Fox cart (very light but 4 wheel suspension!) TEAR IT UP!!!!!
Dam y'all from the vid that thing seems like it has killer bottom end. Killer vid yall great job 👍👊
That thing rips man!
Braxton's squeeks of glee say it all!! Lol keep up the good work guys!
Sounds loud, but has a lot of power.
Man that kart turned out good got so much power for us bigger guys..... can’t wait to see it in person smash the like button people ....
Looks like a blast
Awesome engine and imma diggin those brakes too those are awesome 🤘🏻🤪✌🏻
RBG you need a compact tractor with a grader blade to pave a measured straightaway to calculate speeds & torque.
awesome thanks redbeard!
Holy Cow.....I live right next to Elizabethton in Johnson City and will definitely be taking the kids to the meet up.
Another great build ! With the different sized drivers you guy are,that adjustable seat is a blessing.Straight pipes are ok for start ups.Mufflers arrest Sparks so you don't set dry brush on fire.Speaking of...Extinguisher on that cart,and you're Garage?
That cart is great. Thats what i would build
That thing is badass!👍
I've got three different frames I'm going to power. One is a single seat so I figured I would put something mild on it, one is made for two kids so I figured something a little spicier, and finally a larger frame that's made for two adults. I was thinking about putting the 440cc snowmobile engine I have on it but I might build one of these instead. Advantage for the snowmobile engine is I already have a primary and secondary clutch for it.
Dude! Way crazy! Love it, ya better get some insurance!🤣🤣
I hope you talked to neighbor and acknowledge it was louder than you thought.That echo of the poppin and cracklin exhaust says how loud and mean it is.
This thing sounds like a blown ear drum to me lol. Keep up the great videos!
I’m excited for this bigger shop, do you think it will make it so we could buy some of these go carts from you ? Honestly speaking it makes it nice to see something built and know that the corners were not cut and the work was done right . Thanks for the videos and keep up the hard work!!
that test cart looks like it'd be a breeze to add simple suspension to, jack-shaft at swingarm pivot point, couple bicycle coilovers rear, tall knuckles up front for the valve spring setup.
Awesome!!!
Side note: what model everlast welder is that? And how is it holding up?
Bambam83 so far, so good. I love following this channel! Amazing content! Keep it up RBG¡¡!!
that laugh @ 16:11 says it all, shear joy !
My gx390 Baja Minibike had the same noise issue with the neighbors. Straight piped big blocks rule!
So nicee! My question is, do you put any grease on your parts before installation?
Fun vid, fun build! Why not plumb the overflow back to the tank?
Elizabethton is a few miles from my house! Unfortunately I'll be on a trike run in nevada that weekend. I would very much love to come to a meet!
You guys ever thought about a central pivot front axle? wouldn't need shocks just a restraining strap to stop it going to far. that would be perfect for keeping all four on the floor.
Make a burnout kart. That would be Kool
I instinctively turn my head every time he starts to weld.
Sick cart looks like that thing is going to fly. Great job bud really awesome
What would you prefer in a bone stock configuration between this 18hp and a predator 420 for performance and reliability
I didnt know you were so close! I live like 30 minutes tops from elizabethton, outside of jonesborough
How do you like that Bauer bandsaw? I got a weird project going on myself. A mule like you did but with sportbike motor. It’s been a challenge designing things to fit
Iam about a hour and 20 mins from where the meet up is going be I’ll be there. Can we bring stuff to ride or?
Thanks.
So I’m looking for a go cart I will sometimes use in smooth farm fields but mainly on the road, some of the roads are cracked or uneven or have bumps, is suspension necessary? Speed is probably around 35
Bruh, the off throttle stroke echos through the woods tells you how LOUD it really is! And i thought my buddies Stage 1 420 was LOUD lol 😆
mine was throwing flames om the exhaust it hasnt run in a long time tho
We use the seat's that u have that was on the floor. Cause when ur turning sharp ur not sliding outta the seat. And yes we always wear a 5 point racing harness. Cause we drive the crap outta them. Took my wife's mom for a ride in the Sand rail. And she loved it except when i was doing Wheelie's.
I LIKE IT!!!!!!!!!! (nuff said)
I Like it! Here in Detroit there was a Detroit Hood TV, a bunch of guys at Milan Dragway racing mini bikes and go carts for 18 mi. There was one guy (I think) with a motorcycle engine on a go cart and he hit speeds of 100+ mph ! That's what I'd like to do although I'm in no position to DO it, I'd love to!
neighbors have no fun unless calling on you for having fun.
@Red Beard's Garage
Instead of using a complicated keyswitch on Predator-like engines, you could use an relais, that closes with no voltage running across is, to kill the engine.
I know you're busy with the garage but I have a question about a project have a Carl Heald tryke I'm looking for a good motor to put on it
RedBeardGarage: What wheels and tires are those?
I was gonna put one of these in my King Midget 3. The factory engine is a 12hp Kohler, with a top speed of 50 this is probably a bad idea
That motor is stronger than buzzard breath!
I have a used small buggy frame and a 18 Durmax engine. I’m going to do an engine upgrade like you did with the same parts. What number tooth sprocket do you recommend? And the link for the 1” axel didn’t work.
Lil thing looks like she gonna fly lol but great vid bud God bless
Shout out to all our TN boys
Yessir
An cheaper then Harbor freight but you get quailty too. Man thats a hell of a deal.
You can hear that 30 hp comin outta that lil engine😂
RBG I have a Coleman ct200u-ex mini bike that I only had for a couple of months, but recently the clutch has been giving me problems, its been smoking and when I want to take off I have to hold the throttle down just to get it to go, would you happen to have some advice? And also I am a fan of your videos I love how you fix up the bike and go kart engines
I'm surprised that you guys haven't mad a 4 wheel drive go kart for mudding. That would be sweet. Lol
On a rigid suspension dang go
Which spindles, front hubs and rear hubs did you use? Wheels and tires? I looked on each video to see if it was listed and I didn’t see it.
I just bought a Duromax 18 HP 440cc for a go-Kart rebuild. ( First go-kart ever ) it has pretty large tires in the rear. My question is, how do I improve the takeoff speed it's very slow and take off ?
Will that DuroMax 440 fit where a Honda GX200 was? I’m upgrading a Coleman KT196. Want to know what fits.
The neighbors are planning a huge party after yall move! Hahaha
🧔 Red Beard drag that roll of chain links fence over those ruts grates em down like cheese, add weight if ya have too, your welcome 🤓
Hi, how are you? What size round tubing is that go kart made out of? I have a older one that I am trying to extend but do not know the steel type. However, it looks like the one in your video.
Didn't catch the size of the torque converter or the pricing or where you got it thank you
Red Beard's Garage, would you know where I can get a 15HP diesel stationary motor from America that will deliver to Australia for a cheap boat project I'm working on, I need 2 of them while using 2x 10.5" mud motor propellers. Sorry I know that boats & shit is not really your thing but motors are, thanks.
Mark
Thats what I'm talkin bout!!!!!!
Needs a little taller sprocket on the axle I think thing should be rolling the rear tires more than it already does.
Is the duromax 440cc better than the predator 420cc
Hey ! i would like to do a mini bike project, with a predator 420cc or a Duromax, but for the same price i can get an YX 140 dirt bike motor ! What do you think about that ? In France we don't use this type of motor, is that really powerfull ?
Looks dangerous af. AMAZING.
No camber, no castor, no faster than 25.
lol 👍😎🏁
I prefer a quiet intake. That burp sound lol
So it’s been a year , what’s the update on the 440cc on its reliability compared to a predator 420cc
Man I have GOT to get with you to help me out with my sons go cart (Manco Intruder II). How can we make this happen?
Do you know of any small diesel engines along the lines of the Duromax or Predator?
What is your favorite starter go kart chassis?
Eighty....seven.....hundred....dollars.... for that welding table. It's good to be the Red Beard. I about had a heart attack.
Where did you get those tires and rims? I have the same frame and would lime to get same set up. Thanks.
Did you find out
Where did you buy that speedometer? I'd like to put one on my go kart I'm building
Bike stockiest do lots of different ones.
Red Beard have you thought about building a 4x4 version
I would but it would need a roll cage. We actually have the stuff to do it just need to get other projects done first.
Hi RedBeard, I've got a 35hp vandguard twin, what size clutch setup do I need???
? For u I have a 440cc duromax motor that I need a after market piston for prefer a flat top if they make one thanks Tim Simmons
I want to build a kart do you think this engine would be better on an asphalt dedicated speed kart
Why does my 440 bog down at 1/2 throttle if you go to full it will go just at mid range any help would be great
Love the links, discounts and the video, but how did this go from 18hp to 30hp?
Check out the build video on the engine
Hi.what cvt did you use on the 30hp please?
Holy crap, half way through I realized I have the same go kart.it only has a 6 1/2 Kohler though