BMW R100 cafe racer build, wiring with motogadget motoscope Pro and m unit blue
HTML-код
- Опубликовано: 2 окт 2024
- This is my first try of the R100 projects wiring including motogadget m-unit blue and motoscope pro... Few little hiccups that were fixed and we are all good. follow the full cafe racer build and wiring on my channel
- Кино
this is a quality build...very impressed.
Thanks brother 🙏
Nice work! I was wondering what battery do you use? I am working on a R100R and I like your idea of putting the bat where the air filter sits. It would be great if you could also let me know what cover did you use with that flash lights? Do you have the fuse there as well? Look forward to hearing from you. Thank you.
Thanks for the message mate, I'm running a small Aliant YLP14 lithium battery under the airbox delete cover I sourced from @rougemotorcycles here in Western Australia The trickle charge socket I used was from @ctek which pairs up with one of their lithium trickle chargers so she's topped up when not in use. I have a blade fuse for this under the cover. You can see all the details and plenty of pics on insta under twistedfate_builds buddy and your welcome to hit me up for any other details.
Cheers scott
Question I noticed that you had the points in a can “the bean can”! If you had a digital ignition system would you need the bean can?
Hi Jupiter, I believe with the electronic ignition you get a blanking plate to remove the bean can and blank the hole off as it triggers off the alternator shaft.
I am working on the same build...but you need a camera man! Nice build though!
😅 yes it would be nice to have one! Cheers mate
So over a year later any real hates about motoscope?
Not at all mate, still doing what it should and no problems 😁
Dear Twisted Fate Builds, Having watched your Video a few time i noticed your colored switches. They do not seam to be Motogadget. Could you share what kind of switches those are?
I really like the different color option.
Kind Regards
Hi Ben, these are rebelmoto switches buddy. You can get a good variation of colours to match what your using them for which is why I liked them better than the Motogadget too.
@@twistedfatebuilds Thank you very much for the quick reply, i am gonne check them out right now, cheers!
@@benroh6511 No probs mate, their a great bit of kit
Hi Twisted Fate Builds, great video and clean build, what brand is the yoke that holds the motoscope unit? Thanks a lot
Thanks brother. Its a custom one that Jax Garage sells. If your interested use TWISTED5 at checkout for 5% off too 😉
www.jaxgarage.com.au/product/bmw-r-series-top-triple-motoscope-pro-edition/
@@twistedfatebuilds Please if you have some spared minutes, can you walk us through the aftermarket items you've mounted on the airhead such as the headlight, clip ons etc... Thank you so much 🙏
@@IbericanDJ Everything I've used or fabricated I have listed on Instagram posts at twistedfate_bulds buddy. Probably easier to check that out than go through it all again 😉
@@twistedfatebuilds I will definitely check that out! Once again, clean build 👊
@@IbericanDJ Thanks buddy, appreciate that 🙌
I missed where did you hide breakout A box?
I made a mount that attaches to the frame plate under the tank behind the fork tube that holds the Munit and breakout. I can't post pics in the reply but if you check out my insta page on the build there's detailed shots there 😉
I bought a motoscope pro used. This one is meant for the BMW R9T. now i notice that i am having problems installing it on my bmw k100 caferacer. I cannot change certain settings. including the rpm signal. I keep getting CAN-BUS in my screen. As far as I know I can't turn this off. I'd love to hear if anyone knows a solution!
Hi Mike, they are the same models, just go to settings, system, can bus and select off. You will need a breakout box (A or B) to allow it to work with the K100. B just gives you a couple more functions so I went with that on both builds. Let me know how you go buddy
👏🏼👏🏼👏🏼👏🏼👏🏼👍🏼
Thanks champion 🤘
Loving this build, One quick question, what did you use for your handlebar controls, i.e throttle, clutch and brake levers, etc. Looks really nice!
Thanks again Andy 🙏 throttle is a messnermoto (Instagram) brake and clutch are RS19 Brembo and rebel moto (insta) buttons for controls buddy. I have everything well documented on insta for more detes (@twistedfate_builds) 😉
@@twistedfatebuilds Thank you so much for this information. Absolutely love your build!
thought you were going to click in the McDonalds app by accident
That was no accident Mike, I was hungry after all that wiring 😅 thought I better keep going with the mo ride app and order later though 🍔😁
Hey mate, have you got any info or diagrams on how to install Moto scope pro?
Hi buddy, I only used the instruction manual which has a wiring diagram. Very simple to wire the pro into a breakout box and your inputs go to this too.
What does the scope pro actually wire into?
@@josherfurth3554 into a motogadget breakout box you purchase with the pro which takes all your signal wires into.
@@twistedfatebuilds could I use M.unit blue instead of breakout box or I have to have both?
@@josherfurth3554 As far as I'm aware you'd need both buddy
nice build! did you change the color of the motoscope? i can‘t see anything on mine in the sun…
Thanks mate. If you go into settings, config, bright, I have mine set to automatic so it gets brighter in the sun 😉
Excellent video!!
Hey the handlebar switches are great, where can I find them?
Cheers Jaime, they are rebelmoto buddy
@@twistedfatebuilds Thanks for answering. One more question, what brand is the headlight.
I hope more videos, regards!
@@jaimeelizondo2518 She's a Koso thunderbolt. Love the slim profile of it so you can tuck it hard up to the forks
Does that ticking noise, when you switch on your indicator, demonstrate you still have a flasher unit installed? If so, delete it as the m-unit has a digital flasher already.
Thanks for the comment buddy. That's the ticking on the m ride app through my phone, defo no need for a flasher unit 👌
@@twistedfatebuilds oh, my bad. Thanks for the info. I’ll be wiring my m-unit and button tomorrow. Wish me luck 😂
@@dapezent All good buddy 😅 You'll be fine it was one of the easiest things I've done on the builds for sure. It's an awesome unit 💪
Good stuff bro! Tons of inspiration for my build. I was curious if you could give a little more info on the battery setup…? I’m looking to relocate mine and this is the first I’ve seen under the air box cover. So clean!
Thanks Emilio 🙏 The little aliant is super punchy but as it's still new time will tell if it's ok in there. I have an insta page with loads more info in both of my builds including the airbox delete and battery set up which may be easier for you to see and contact with any questions @twistedfate_builds
Cheers
Scott
What mount did you use for that? I love how it's plush. Recently got in to motorcycles and I went all in on the bike of my dreams, this is one of my prime mod ideas.
Seems way more involved to install than I ordinally thought.
This is a custom made top triple from the legends at Jax Garage in Melbourne. They now have them in stock and I highly recommend it mate, It's a sweet bit of kit. If you choose to go ahead with one or anything they offer use code TWISTED5 at checkout for 5% off your full cart 😉
@@twistedfatebuilds Well, I'm looking to upgrade my Night rod, so I'm sure it would be a lot different regarding the mount and process
@@ministryofwrath Just a little 😁 They do a lot of custom work mate so sure they could design one up for you if you wanted to head that way. It was the same when I started the R build
Totally awesome. Looking into the c series.. how much psi would I need and which airgun to get to do spraying like you do?
Thank you Davioo 🙏 you need a regulator at the gun and I usually spray at around 20-25psi. I did a bit if research and went with the ANI R150 gun which is relatively cheap but is comparable to the Devilbiss etc. Just make sure you get a gun with a 0.8 tip 😉
@@twistedfatebuilds thanks bro!
Nice video bro! Thanks for all the tips. A few quick questions about your engine paint?
How did you paint? Did you take it apart? And what paint did you use?
Keep up the great work :)
Thanks Joshua 🙏 I did take the whole engine apart mate. Full clean down and coated in VHT wrinkle coat and the cylinders in high temp engine enamel due to the heat. I have the whole process on insta @twistedfste_builds 😉
@@twistedfatebuilds nice bro! Looks really good. Thanks a lot. I'll check that out. I'm trying to figure out what the best way to paint the engine is. Excited to see how you did it
Man everything you do is on point. Keep up the good work.
Thank you for the comment brother 🙏 really appreciate it 👍
Super clean wiring job! Great build
Thanks Dennis 🙏 now I have the bugs sorted I can tidy it up for good 😉
great video where can I find the motogadet face plate, im in the market for one
Thanks brother, I got my top yoke from jaxgarage.com.au if you go that way use code TWISTED5 at checkout for 5% off your total order 😉