Thank you for the video Please how much is the Total weight of the board with mast Without the motor and battery ... Just the board with mast Thanks again
Can you tell me what motor u used in the end? im working on my own project with an old windsurfing board.. I have made the foil fin from scratch using carbon fibre and encompassed a spot to mount the motor. I am struggling to find a good motor
If it had a dampener built into the up and down action to reduce the movement reflected down to the foils so the tilting would affect the fins about half maybe? Like power steering sort of.
I think the problem then would be retracting for shallow water. The boats or foils in use have the fins on the boat. I'm just guessing, but that seems to be the only downside to these foil boards. You have to know your area really well, or you run the risk of reef or sandbar collision. In a boat you don't get in it, in deep water. You pull away from shore or dock already in it.
pretty impressive, i use duel electric trolling motors mounted on either side of my bote paddle board, works really well, but i went with the cheapest troller i could get.. ie. mine kota 30lbs of force and, even with 2 of them, it's still too slow! maybe you have some advice on how i could speed this thing up without spending a fortune on new trollers?
Hey plz could u put the motor/jet u used. I will comment every day on this vid same thing every day until I find out what jet u used. Plz I am bored in quarantine.
Its direct drive so no reduction gear in newest design. We have a couple prototypes RPM's range from 7000 - 16,000 from mini prop to high speed impeller.
@@DIYElectricHydrofoil I'm looking for similar reduction gears to step up low double digits RPM to around 1200 - 1400 RPM. Could you tell me where you got yours? I know you're not using reducing gears anymore but where are the one you had in the video or where did you source them?
New 2020 boards available at: e-surfer.com/en/shop/
Thanks
Thank you for the video
Please how much is the Total weight of the board with mast
Without the motor and battery ...
Just the board with mast
Thanks again
Looks like you're getting it all figured out. I admire your work.
Thank you for the all the interest and questions. If you read the article (link above) you will find most answers and contact information to connect.
Thank You E-Surfer for sharing this video with your tribe!
Can you tell me what motor u used in the end? im working on my own project with an old windsurfing board.. I have made the foil fin from scratch using carbon fibre and encompassed a spot to mount the motor. I am struggling to find a good motor
Love it! Porbably my next project.
If it had a dampener built into the up and down action to reduce the movement reflected down to the foils so the tilting would affect the fins about half maybe? Like power steering sort of.
I'm looking for a kit like this for my kayak with maybe a backpack style battery pack for long range.
it's called an outboard motor
Too heavy. Electric turbines are 1/10th the weight.
true, what about the heavy car battery you will have to field for some "long range"?
Lipo would be nice for a kayak
Cult1022
Are you unaware of available battery tech?
What is your motor model sir?.Could you share motor spesificiations?Thank you.
Do you think you could add hydrofoil fins to a small hp outboard and power a larger skiff or paddle board
I think the problem then would be retracting for shallow water. The boats or foils in use have the fins on the boat. I'm just guessing, but that seems to be the only downside to these foil boards. You have to know your area really well, or you run the risk of reef or sandbar collision. In a boat you don't get in it, in deep water. You pull away from shore or dock already in it.
So interesting video clip thanks a lot
You should see a kit. After the bugs are worked out.
Where are you located? Can you install one of these on my paddle boarding
I want to go in morocco to spain 15 km how mauch dess surf board
Get a board with a longer range
Wow, I like it!!!
Why are you so clever
Where did this project go?
I din't get any reply from Christian since a while. He might have stopped.
Awesome will you ship to australia? I will definitely put in an order.
pretty impressive, i use duel electric trolling motors mounted on either side of my bote paddle board, works really well, but i went with the cheapest troller i could get.. ie. mine kota 30lbs of force and, even with 2 of them, it's still too slow! maybe you have some advice on how i could speed this thing up without spending a fortune on new trollers?
Change the propeller to a higher pitch version. That will give you more speed. Hopefully doesn't burn the motor though :D
Hey everyone, we just posted an update about our eFoil system us16.campaign-archive.com/?u=f633e9d55535b671786d462ba&id=36df80164b
amazing
nice ! where to buy parts please
All info is here: e-surfer.com/en/diy-electric-surfboard-electric-hydrofoil/
Hey plz could u put the motor/jet u used. I will comment every day on this vid same thing every day until I find out what jet u used. Plz I am bored in quarantine.
This is an old video from 2017. You may find newer versions at MHZ: diy-electric-surfboard-kit-mhz-watercraft
E-SURFER electric surfboard & hydrofoil magazine can u still link what motor u used plz
Price plz
Good afternoon, what is the engine speed, the reduction gear box and the propeller?
Its direct drive so no reduction gear in newest design. We have a couple prototypes RPM's range from 7000 - 16,000 from mini prop to high speed impeller.
@@DIYElectricHydrofoil I'm looking for similar reduction gears to step up low double digits RPM to around 1200 - 1400 RPM. Could you tell me where you got yours? I know you're not using reducing gears anymore but where are the one you had in the video or where did you source them?
Do you have a rider? Looks mean!
Hello, how and where do you install the speed controller?
Waterproof box. the compartment that can be mounted on top of the board or inside the board.
Sanane
Un video con la prueba no se ve en uso
will you be selling diy kits in the future? Nice Vesc you got there.
For a more structured way to ask questions, please use the following forum: forum.e-surfer.com/viewforum.php?f=39
Yes we will, this spring DIY kits or ready to go efoils www-VeFoil.com
genial lo maximo
Hey watch Pacificmeister he made many sorts of videos on DIY Efoil, nice vid tho
very cool setup! whats that prop? where did you get that from? isn`t 7k rpm a bit high?
For a more structured way to ask questions, please use the following forum: forum.e-surfer.com/viewforum.php?f=39
Small props require much higher speeds/rpm. Impellers in this range spin 14-16,000 RPM at full throttle.
Do you have a ride video?
For a more structured way to ask questions, please use the following forum: forum.e-surfer.com/viewforum.php?f=39
When can I buy one?
We plan to have them available this spring! www.VeFoil.com
If it’s, what, $16000 cheaper than some others!!! I am sold sold sold...
Can you make one for me :)
Great work. How do you keep that motor dry??
For a more structured way to ask questions, please use the following forum: forum.e-surfer.com/viewforum.php?f=39
Shaft seals, orings etc...
cool
do you sell ?
Not yet, check here: www.diy-electric-hydrofoil.com
For a more structured way to ask questions, please use the following forum: forum.e-surfer.com/viewforum.php?f=39
E-SURFER cc
Yes we will be selling them this spring www-VeFoil.com
Where & how can we buy this electric hydrofoil product?
I'am waiting for good news from you.
Thanks
They have changed their business model, All info here: e-surfer.com/en/vecarve-6-0-electric-foil-veconcept/
7.000 rpm ?...
Круто!
E bellissimo
Тема сисег не раскрыта, расходимся. Поездки не было.
Nice try but a big box in the front no thanks
Electric foil boarding, so fun, check the link @MAXU
голос ужасно тихий!
Hey can u plz list what kind of motor/jet u used
I don't have this info. It was done from Chris at veconcepts.com
E-SURFER electric surfboard & hydrofoil magazine it’s not out yet I would I have to pre order it is there any other options
@@sushigang9363 Just contact them by email and refer to this video.
E-SURFER electric surfboard & hydrofoil magazine ok I will try that just a question did it work love ur vid