Great video! I've never seen anyone turn the car on and lock the clutch in to take the bolt off. Great video!!! It beats going to the parts store and getting the pulley tool. You have me inspired to get the job done!!! Thanks again for this excellent video.
+playstation2bigs hey i have an mx5 which even when i turn the AC clutch on, the end plate and nut still rotate, tried clamping the pully and the plate and i cant get enough force to release it the slightest without the slamp falling over, starting to get frustrated, and i dont want to spend 120 bucks for something i will only ever use once.
I did this on a 1998 Coupe. Pretty straightforward with the exception of having to remove the compressor from the system. The outside of the pulley require some special attention to remove of the splines. $15 in 134A for recharge. Other than that it was pretty easy. Thank you!!
why cant I just slide my clutch cover off like you did? I got the bolt off and now its just stuck there, I disconnected all the electrical connections to the coil so I dont know what it is
playstation2bigs Well fuckme Yoda's on the job. Talk about kerbside repairs. Didn't so much beat the bearing out but bludgeon the fucking thing to death. Whats with the furry mits? Good thing the car was fucked before you worked on it, cause it sure was after.
Hi there, The clutch does not engage in my Land cruiser 2004, if i follow your procedure for removal of the pressure plate (The ac is working fine). can you suggest me other way to remove the pressure plate.
I would have cleaned the clutch plate to remove any metallic debris. Looked like it had been slipping as the plate was worn. I will be trying this on my 2004 T25 Avensis. I think there are some adjustment shim/washers on mine. My car has 205,000Km and I think the previous African owners haven't bothered any servicing since it was imported. Someone recharged the gas but claimed the compressor was faulty, in fact the clutch wasn't kicking in even though the mag coil is 10 ohm and I can connect it across 12v. Good video, thanks! And the moaners of the music... try lowering the volume! Doh.
what a great video thanks for the system of order of removal and replacement and also the music is very good what band is this I like this tune very much that's very heavy and guitar oriented please inform me again thanks stephen
Sir plan q dpat magpapalit ng bearing ksi maingay pag nagbubukas aq ng ac kaso sabi nung nagawa need dw kalasin ang buong compressor at balitan ng freon? Tama po ba yun base sa video nyo d nmn inalis ang compressor salamat sa video nyo.
Kung nag engage ang aircon mo natakbo makina at umingay ang ac compressor mo malapit sa makina ibig sabihin sira na compressor mo, kung naka dis engage o patay ac compressor mo at natakbo makina na walang ingay ibig sabihin okay bearing mo. Sumatotal sira compressor kasi maingay pag mag aircon kana, pag engage aircon compressor
Me disculpa el amigo que publico este video pero la parte de extraccion de la rolinera asi nunca deben hacerlo, por que dañan o doblan la polea deben afincar el el centro donde va la rolinera para extraerla con golpes para no dañar la polea, hago esta acotacion de forma constructiva y no buscando perjudicar, el video, muy al contrario a colaborar se hagan bien y mejor las cosas gracias . todo lo demas esta bien saludos y Dlb . beun dia
boss, may problema ako.. pag naka-engage ung clutch ng compressor ko medyo maingay sya tapos parang hirap ung makina, possible ba na sira rin ung bearing ng compressor ko? sana matulungan mo ako tnx
playstation2bigs Well fuckme Yoda's on the job. Talk about kerbside repairs. Didn't so much beat the bearing out but bludgeon the fucking thing to death. Whats with the furry mits? Good thing the car was fucked before you worked on it, cause it sure was after.
playstation2bigs Well fuckme Yoda's on the job. Talk about kerbside repairs. Didn't so much beat the bearing out but bludgeon the fucking thing to death. Whats with the furry mits? Good thing the car was fucked before you worked on it, cause it sure was after.
playstation2bigs sira na ba compressor nun? malamig naman ung aircon, umiikot naman sya ng mabuti mag konting2 ingay lng na naririnig pag nasa loob ng car, pero sa labas wla ka maririnig na ingay.. ska pag biglang aandar ung compressor normal ba na parang mahihirapan ung makina or parang magkakaload sya?
Gilberto. Eso se llama resolver. A la final cumplió con el cometido y no hizo falta la prensa, ni tampoco un extractor. Mas bien es un dios!! me ahorro unos 156$ solo por hacer este trabajo, ya hasta me pensaba comprar un compresor nuevo en EUA, denso por 187$ que me salia mejor, todo por culpa de los usureros de los técnicos de refrigeración automotriz, que empezaron con los cuentos chimbos de hay que quitar, cargar gas, empacaduras del compresor. blablabla... playstation2bigs Man! thank you very much!! excellent job, the perfect guide to save some $
Great video! I've never seen anyone turn the car on and lock the clutch in to take the bolt off. Great video!!! It beats going to the parts store and getting the pulley tool. You have me inspired to get the job done!!! Thanks again for this excellent video.
+Errol Dillon Your welcome bro :)
+playstation2bigs hey i have an mx5 which even when i turn the AC clutch on, the end plate and nut still rotate, tried clamping the pully and the plate and i cant get enough force to release it the slightest without the slamp falling over, starting to get frustrated, and i dont want to spend 120 bucks for something i will only ever use once.
Very good video. I didn't have to listen to a commentary. It just shows you how it's done. 👍🏼
Great music to watch your video by. Nice job on the close ups. Thanks!
Super useful to me, thank you for sharing!
Welcome
I did this on a 1998 Coupe. Pretty straightforward with the exception of having to remove the compressor from the system. The outside of the pulley require some special attention to remove of the splines. $15 in 134A for recharge. Other than that it was pretty easy. Thank you!!
Miles West Your Welcome ;)
Thank you for this guide, now I have much peace of mind dismantling and replacing that noisy bearing.
Your welcome!!
Thank you its simpl and easy way to remove and installing the new bearing
You're welcome
Thanks mate ! appreciate the help all the best from Australia
Warwick Tasker thank you bro
Great Job on the Video! Thank you!
+cmasui your welcome
This is a nice guide. thanks for taking the time.
Your Welcome !!! :)
Thank you very much for your video, its realy help me a lot. Greeting from Greece👍👍👌
+Γιάννης Σταυρουλάκης Your Welcome ;) from Philippines
thanks for this video, it helped me to fix my car
You're welcome
why cant I just slide my clutch cover off like you did?
I got the bolt off and now its just stuck there, I disconnected all the electrical connections to the coil so I dont know what it is
Excellent video thanks for taking the time. :D
Your welcome !!!
playstation2bigs Well fuckme Yoda's on the job. Talk about kerbside repairs. Didn't so much beat the bearing out but bludgeon the fucking thing to death. Whats with the furry mits? Good thing the car was fucked before you worked on it, cause it sure was after.
Tools required for the job: 10mm socket, ratchet, hammer, snap ring pliers. Great!
Thanks
Hi there,
The clutch does not engage in my Land cruiser 2004, if i follow your procedure for removal of the pressure plate (The ac is working fine). can you suggest me other way to remove the pressure plate.
Good work engineer. pls how can i identify bad pulley surface? Thank you
I would have cleaned the clutch plate to remove any metallic debris. Looked like it had been slipping as the plate was worn. I will be trying this on my 2004 T25 Avensis. I think there are some adjustment shim/washers on mine. My car has 205,000Km and I think the previous African owners haven't bothered any servicing since it was imported. Someone recharged the gas but claimed the compressor was faulty, in fact the clutch wasn't kicking in even though the mag coil is 10 ohm and I can connect it across 12v.
Good video, thanks! And the moaners of the music... try lowering the volume! Doh.
hahahaha okay, your welcome. Clutch plate never slipped even it looks worn out.
what a great video thanks for the system of order of removal and replacement and also the music is very good what band is this I like this tune very much that's very heavy and guitar oriented please inform me again thanks stephen
Your welcome :D the background music taken from a playstation 2 import games
I changed out my old one but when i out new pulley on it doesnt soin around the bearing? Is it installed incorrectly
Clean the pulley, maybe the rust is in there, that's why it wont fit. Or the bearing outer diameter is large
kumusta 15c compressor sa 2e mo boss? mabigat ba?also, ano circumference ng pulley? ty
Hey man, thanks for the guide, but where or how did you get the bearing from? ordered it? or just any auto-parts shop?
Your welcome dude!!! ->At trusted auto-part shops. Just bring the old bearing
Sir plan q dpat magpapalit ng bearing ksi maingay pag nagbubukas aq ng ac kaso sabi nung nagawa need dw kalasin ang buong compressor at balitan ng freon? Tama po ba yun base sa video nyo d nmn inalis ang compressor salamat sa video nyo.
Kung nag engage ang aircon mo natakbo makina at umingay ang ac compressor mo malapit sa makina ibig sabihin sira na compressor mo, kung naka dis engage o patay ac compressor mo at natakbo makina na walang ingay ibig sabihin okay bearing mo. Sumatotal sira compressor kasi maingay pag mag aircon kana, pag engage aircon compressor
SWEET JOB BRO
Pedro Rodriguez Thanks :)
excellent video bro A➕
+XxMetaReaperxX Explosion Thank you :)
good job, what is the size of the bearing?
I bring the old bearing to the auto store and they use a vernier caliper to measure the old bearing
@@playstation2bigs ah ok, thanks a lot
What year and model car? Is that aToyota Corolla?
Toyota corolla 1995 E100 2E engine
Great can you tell me the bearing part number
Me disculpa el amigo que publico este video pero la parte de extraccion de la rolinera asi nunca deben hacerlo, por que dañan o doblan la polea deben afincar el el centro donde va la rolinera para extraerla con golpes para no dañar la polea, hago esta acotacion de forma constructiva y no buscando perjudicar, el video, muy al contrario a colaborar se hagan bien y mejor las cosas gracias . todo lo demas esta bien saludos y Dlb . beun dia
I need a new pulley for a 2002 toyota tacoma do u no the part number
Sorry I don't know. We usually bring the old one to the auto store or junk yard store for comparing
Pwede ba sir ang denso15c sa 12valve corolla small body?
Kung malakas sipa ng makina mo
Can we not change the whole assembly bearing and the pulley?
Yes you can buy a kit but it’s like $80 vs $20 for a bearing and you aren’t replacing the coil, so pointless to do the kit with extra labor to boot
Ano size ng fan belt gamit mo sa compressor?
Same lang po ba ang bearing for 15C compressor kahit magkaiba ang pulley?
Oo, pero mas maganda makuha mo yung luma at ipakita sa auto supply store.
@@playstation2bigs possible po ba na stuck up ang bearing kung medyo mahigpit ang pulley pag inikot?
@@laonerom7061 baka yung Clutch ng compressor naka engage ? Kaya hirap iikot ng kamay, kapag dis engage ang clutch naiikot ng kamay lang
same lang ba yan sa lahat ng compressors? example hyundai starex po?
basta 15c, sa head top ng compressor ang na iiba (lagayan ng tubo) at pulley ng compressor
Thank u
Welcome
What car is this, Nissan Sentra?? What year?? Thanks=)
+Eero Laukkanen Corolla 1995
good day parehas kya bearing ng 15c at 17c bka po may part number ka tnx
Dinala ko yung sira kong bearing sa auto supply at sinukat nila, then meron silang stock
? was your clutch engaging and disengaging
Yes! they are engaging and disengaging
was this problem solved after the bearings were replaced .my ? was if that was the problem to begin with
lost55551 Maybe, if he adjust the air-gap of the cluch, this can solve this new problem...
yes it was just a bad bearing
What's the part number for this particular bearing?
Joel Greenberg hi!! i don't know. In the car shop store i just showed him the old bearing
NSK 30BD5222T1XDDUM6CG01
Hello !!
how to get that bearing?
I looking for also sir.
Thank you.
automotive store, bearing store
looks like you presume the shim is still there and did not fall out.
boss, may problema ako.. pag naka-engage ung clutch ng compressor ko medyo maingay sya tapos parang hirap ung makina, possible ba na sira rin ung bearing ng compressor ko? sana matulungan mo ako tnx
John Redoban baka sira na compressor mo?
playstation2bigs Well fuckme Yoda's on the job. Talk about kerbside repairs. Didn't so much beat the bearing out but bludgeon the fucking thing to death. Whats with the furry mits? Good thing the car was fucked before you worked on it, cause it sure was after.
playstation2bigs Well fuckme Yoda's on the job. Talk about kerbside repairs. Didn't so much beat the bearing out but bludgeon the fucking thing to death. Whats with the furry mits? Good thing the car was fucked before you worked on it, cause it sure was after.
playstation2bigs sira na ba compressor nun? malamig naman ung aircon, umiikot naman sya ng mabuti mag konting2 ingay lng na naririnig pag nasa loob ng car, pero sa labas wla ka maririnig na ingay.. ska pag biglang aandar ung compressor normal ba na parang mahihirapan ung makina or parang magkakaload sya?
magkaka load talaga sya
First time I've seen someone doing greasy car mechanics while wearing knit wool gloves.
First time to read a comment like this
ask lng sir.. panu pag yun aircon ng oto q pg i on mu blower lng gumagana...yun compressor wla eh d nag engage ...anu kya sira ..
clutch coil
Magkano sir yung bearing na bagong pinalit nyo?
Parang nasa 500 dati japan made
Ty paps. Sa mga auto supply lang meron na ganung bearing?
Laki tulong ng video mo sir. Subscriber mo na ako. BB 2e user here. More power
@@gentiltube basta dala mo yung lumang bearing susukatin nila yun
👍✌👌💙
Glad you like it
WHY DID YOU NOT USE A PULLIE
Easy way????/
More cowbell!
Thanks for watching Nibbro
Lawd fadda. If you make anymore video's, please leave the music out. Sooo annoying!
Eso es pecimo lo que esta haciendo,que busque una prensa hidraulica para ese remplaso
Sorry can't understand what your saying even i use the google translator
Gilberto. Eso se llama resolver. A la final cumplió con el cometido y no hizo falta la prensa, ni tampoco un extractor. Mas bien es un dios!! me ahorro unos 156$ solo por hacer este trabajo, ya hasta me pensaba comprar un compresor nuevo en EUA, denso por 187$ que me salia mejor, todo por culpa de los usureros de los técnicos de refrigeración automotriz, que empezaron con los cuentos chimbos de hay que quitar, cargar gas, empacaduras del compresor. blablabla... playstation2bigs Man! thank you very much!! excellent job, the perfect guide to save some $
admin242 YOUR WELCOME !!
I will never have u work on my family car with a claw hammer !!!! NEVER
Not a video but playing the music
The music SUCKS distract from actual hearing the noise bearing
Cut the music. Put me to sleep.
Press mute noob
music ....not sure about it's application.
Hammerrrrrrrrr??? Nooooooooooooooooooooo!!!!!!!
good knowledgeable video ,but why the stupid audio .???????
Waaaaay tooooo longggggg
You mad ?
@@playstation2bigs nope
@@playstation2bigs good video just too long