I am so proud on CZUB that they managed to make such a great weapons like BREN2 and Scorpion EVO. I hope that soldiers in Hungary will enjoy their BREN2's.
The adverse conditions setting IS NOT a suppressed setting. Think about that. Adverse setting is sending MORE gas to the piston to deal with dirty conditions. This setting is harder on parts and decreases the life of those parts. While shooting suppressed you want LESS gas sent to the piston because you are already dealing with more gas due to having a can increasing back pressure.
Cz Bren 2 S is the Best weapon made in my opinion. Pair it up with a Cz p-10 Optics Ready and you have the best 1, 2 weapon combo available! Thanks for the great video!
I have bouth guns, the bren 2 ms 5.56 and p10c. The bren 2 is every thing but no rebalaty. I shoot this in durty conditions and had malfunction after malfunction, could not shoot 20 round withou malfunction. the gun was not durty as hell, could imavine how it is in a fight wen you have e gun where is thet crappie. The p10c triger is damm shit, badest triger i ever seen. and the mag relase is so hard you have to use bouth hands. but the sights are great. The Sig MCX and 553 are the best gun ever made maybe the Robinson Arms XCR to.
Great info/vid. Well done. Big CZ nut hugger here, and, own several CZ pieces. 2 evos to the shadow2, to p10c and F, several sp01s, and more in between, I am still dragging my feet on the Bren2. And in this time/climate, its just not the best time to purchase,.. hell, anything gun related. That said, I think ill go get one tomorrow 😃 . Appreciate your time and info.
The second position on the Scar is not the adverse setting (which would allow more gas), its the suppressed setting which is the exact opposite (allows less gas). The gun won't cycle on the suppressed setting unless you have a suppressor on it.
If your scar runs fine on suppressed with no can, it’s probably because of whatever you're feeding it load-wise is a bit heavy or it might be because you don't shoot a lot of rounds or get it mucked up between cleanings/lubings. You might find it to be a bit more ammo picky as to whether it cycles, and it might struggle as it gets dirty. Personally, I have a Sig MCX (pre virtus) that is similar with the ammo I use and I keep it on the suppressed setting even without a can to minimize the wear (I dread needing replacement parts given Sig's record of supporting discontinued stuff). Your mileage may vary though.
I watch a lot of gun videos.. I enjoy them all, but you two I was thoroughly impressed with the two guys just hanging out, shooting and talking about guns aspect...felt completely organic and not forced.. Keep up the good work👍👍
Jhon actually let me shoot his Black cz pistol a few rounds after asking wtf he was shooting. That blast hits you in the face hard. He schooled me on his BCM grip and the Muzzle break he had on. Couple days later put same muzzle break on my 4.75 barrel 556 and it's pure chaos lol.
Hello from Birmingham, AL! Good video! Your screen presence and interaction was very smooth and pleasant. Please lighten the video, especially the range segments. I've had a thumb whacked by an AK charging handle--lesson learned. Between the two, I'm more drawn to the Bren. The SCAR just looks bloated--especially for the money.
The bren is a all round better firearm, much more reliable then the scar. I have over 8,000 rounds in my bren 2, 7.62x39 with zero issues... my scar 17 has had issues multiple times and finding parts for the scar is ridiculous to find.
I love my bren 2, they need to hurry up and release the new barrels sizes. i want to SBR mine and go from 16" to 14.5 or 12.5 without cutting my barrel down.
@Les Fernandez That's how it looks like with every models except for the BR. The reason is probably because they don't want to shift the piston's port location further, so it costs less to manufacture the same pistons over different length barrels. So they don't have to make much different gas settings for each. It kinda sucks but yeah.
Good video and teamwork. Noticed you were using Aimpoint optic. What was that high rising mounting platform you used? I've decided Bren 2 hands down so I have an extra 2K to customize and buy more ammo to become proficient. I wish they would civilianize the Bren 2 BR in (.308) and bring to the USA. This is what I'm waiting for.
The carbine comes with it. The pistol you will have to buy it once cz releases the 922r kit and convert it to sbr with atf. Thebother option is the acr stock using dan hagas adapter OR his acr tailhook adapter to keep it lefally a pistol
Why do you put the weapon on safe when transitioning to the high ready right after firing then immediately start firing again? Totally unnecessary safety precaution
Literally the only reason I got a 5.56 version hahaha if they ever actually make conversion kits available I'll get one for 7.62 and some mags but its cz so who know when or if that will happen. I didnt wanna be stuck with a bad ass gun and only 2 mags so I got the version that takes the 25+ mags I currently have
@@maxginn1051 they make AR 7.62 mag adapters... which is at least something but it's not ak mags. They're far from ak mags hahaha but again, it's a new gun and at least that's something to hold people over until cz mags become available
@@kenneth5034 yes the 14” is in both, they really didn’t do any changes to the bren 2 at all because you go look at the rifles on cz USA it’s still the same
![BabyChiefDoit - Wonderful Time (Official Music Video) [Shot By @Rxllo]](http://i.ytimg.com/vi/_Bfqt3zV2KE/mqdefault.jpg)
I am so proud on CZUB that they managed to make such a great weapons like BREN2 and Scorpion EVO.
I hope that soldiers in Hungary will enjoy their BREN2's.
The adverse conditions setting IS NOT a suppressed setting. Think about that. Adverse setting is sending MORE gas to the piston to deal with dirty conditions. This setting is harder on parts and decreases the life of those parts.
While shooting suppressed you want LESS gas sent to the piston because you are already dealing with more gas due to having a can increasing back pressure.
Correct
im surprised they havent changed this on the shorter barrels because the carbine has a suppressor setting instead of the adverse setting
meanwhile where hanging our brens up to power wash from the mud in ukrain trenches. these brens are doing excellent. i left my scar back home.
Cz Bren 2 S is the Best weapon made in my opinion. Pair it up with a Cz p-10 Optics Ready and you have the best 1, 2 weapon combo available! Thanks for the great video!
Yes Sir Agreed!!
I wouldn't go that far, but I'd say best-in-class.
Is there a class above Cz Bren 2 and Fn Scar?
@@charltont23 yes. Wa2000 lol
I have bouth guns, the bren 2 ms 5.56 and p10c.
The bren 2 is every thing but no rebalaty. I shoot this in durty conditions and had malfunction after malfunction, could not shoot 20 round withou malfunction. the gun was not durty as hell, could imavine how it is in a fight wen you have e gun where is thet crappie.
The p10c triger is damm shit, badest triger i ever seen. and the mag relase is so hard you have to use bouth hands.
but the sights are great.
The Sig MCX and 553 are the best gun ever made maybe the Robinson Arms XCR to.
Thank you! I am so happy my CZ BREN 2 11” 7.62x39 just got delivered and about to head out to pick it up. Thanks again gentlemen!
I got mine 2 weeks ago
want!
Got the both .....I’ll take my scar 🤷🏾♂️
@@Stickmankenny214 same,. And selling my scar.
@@96kylar why accessories pricing ?
Great info/vid. Well done. Big CZ nut hugger here, and, own several CZ pieces. 2 evos to the shadow2, to p10c and F, several sp01s, and more in between, I am still dragging my feet on the Bren2. And in this time/climate, its just not the best time to purchase,.. hell, anything gun related. That said, I think ill go get one tomorrow 😃 . Appreciate your time and info.
I would suggest lowering the volume of the music but otherwise great video!
The music behind the whole video is super annoying. It's like being on hold. No need for the cheesy music.
I barely noticed it
The second position on the Scar is not the adverse setting (which would allow more gas), its the suppressed setting which is the exact opposite (allows less gas). The gun won't cycle on the suppressed setting unless you have a suppressor on it.
Exactly
My scar runs fine in the suppressed setting without a can
If your scar runs fine on suppressed with no can, it’s probably because of whatever you're feeding it load-wise is a bit heavy or it might be because you don't shoot a lot of rounds or get it mucked up between cleanings/lubings. You might find it to be a bit more ammo picky as to whether it cycles, and it might struggle as it gets dirty. Personally, I have a Sig MCX (pre virtus) that is similar with the ammo I use and I keep it on the suppressed setting even without a can to minimize the wear (I dread needing replacement parts given Sig's record of supporting discontinued stuff). Your mileage may vary though.
I just got in my CZ bren 2 ms 5.56 14" barrell with a Sba -3 brace 👌
I watch a lot of gun videos..
I enjoy them all, but you two I was thoroughly impressed with the two guys just hanging out, shooting and talking about guns aspect...felt completely organic and not forced..
Keep up the good work👍👍
Definitely organic, they were zyning with gayness.
@@sneakyhenry16 😐😑
Jhon actually let me shoot his Black cz pistol a few rounds after asking wtf he was shooting. That blast hits you in the face hard. He schooled me on his BCM grip and the Muzzle break he had on. Couple days later put same muzzle break on my 4.75 barrel 556 and it's pure chaos lol.
They are both fantastic battle rifle platforms. Why choose when you can have both?
Because 5.56mm scar isn't made anymore. Also bren 2 has multiple upgrades over scar.
Love to know when the Bren 308 comes out
At the synchronised firing segment (16:22) Troy flinched every time and John only blinked after. Interesting....
I appreciate both of you guys keep making more videos
Hello from Birmingham, AL!
Good video! Your screen presence and interaction was very smooth and pleasant. Please lighten the video, especially the range segments.
I've had a thumb whacked by an AK charging handle--lesson learned.
Between the two, I'm more drawn to the Bren. The SCAR just looks bloated--especially for the money.
Which muzzle break for the BREN 2 from surefire?! I want
The bren is a all round better firearm, much more reliable then the scar. I have over 8,000 rounds in my bren 2, 7.62x39 with zero issues... my scar 17 has had issues multiple times and finding parts for the scar is ridiculous to find.
I love my bren 2, they need to hurry up and release the new barrels sizes. i want to SBR mine and go from 16" to 14.5 or 12.5 without cutting my barrel down.
@Les Fernandez That's how it looks like with every models except for the BR. The reason is probably because they don't want to shift the piston's port location further, so it costs less to manufacture the same pistons over different length barrels. So they don't have to make much different gas settings for each. It kinda sucks but yeah.
i wonder what these guys would think of the nrch version of the fn scar
Great video guys 💪🏼
What hurt the scar is the 1200 price increase in the past few years...
They are still selling like hot cakes online smh
Good video and teamwork. Noticed you were using Aimpoint optic. What was that high rising mounting platform you used? I've decided Bren 2 hands down so I have an extra 2K to customize and buy more ammo to become proficient. I wish they would civilianize the Bren 2 BR in (.308) and bring to the USA. This is what I'm waiting for.
Unity Tactical makes those mounts.
So you got a pistol brace to be compliant with the ATF but then on the same gun have a vert grip because to hell with the ATF. Wtf?
How do those shells feel hitting your right arm?
Excellent videos guys! Mutual friend of Mike P.
I would take the B&T APC308 Pro over the SCAR 17 or CZ Bren.
Black/dark video background was poor at best to view demonstration clips. Brighten-er up man!
I agree the 5.56 Bren 2 is better than the scar 16 but is it better than a high end ar15 like the Kac Sr-15?
Depends on what characteristics you're comparing. They aren't remotely similar guns
if your shooting 556
get a high end ar15 imho..
if you want to shoot 308 or 7.62x39 check out a bren or scar
Having both, I’m letting go of the Bren2. Not as accurate, not as nice of recoil impulse, and runs much hotter. Scar 16 10” is hard to beat.
My Bren 2 takes gen 2 pmags just fine. Even gen 1
Yes
What I wanna know is where the hell do you get the cz stock?
The carbine comes with it. The pistol you will have to buy it once cz releases the 922r kit and convert it to sbr with atf. Thebother option is the acr stock using dan hagas adapter OR his acr tailhook adapter to keep it lefally a pistol
The 2s still takes most mlok accessories I believe
i want to like the bren more for the ergos but the scar just has a certain mojo
I want a Bren 2 so bad. I saw a 7.62 with a 9" barrel, and the folding/extendable buttstock at my LGS, and I was just DROOLING over it...
The 7.62 version got a lot of problems base on my understanding.
@@Tom-mj3cc explain plz
What model Surefire muzzle brake is on that Bren2??
Are they going to import the 7.62x39 bren 2ms rifle?(not the pistol)
They already started to import them, the gun shop I always go to is a partnered cz dealer and they have a couple
... But the latter scars,well the pdw version,indeed have a non reciprocating charging handle ! 😎.
What muzzle device is in the 8in bren 2 in 556
The "music", made this unwatchable
Why do you put the weapon on safe when transitioning to the high ready right after firing then immediately start firing again? Totally unnecessary safety precaution
I need magazines for the cz bren 2 7.62x39. Literally everyone is sold out.
I just bought a bunch from magpul and cZ..
Literally the only reason I got a 5.56 version hahaha if they ever actually make conversion kits available I'll get one for 7.62 and some mags but its cz so who know when or if that will happen.
I didnt wanna be stuck with a bad ass gun and only 2 mags so I got the version that takes the 25+ mags I currently have
@@aceman1126 they already made ak magazine adapters, hb industries
@@maxginn1051 they make AR 7.62 mag adapters... which is at least something but it's not ak mags. They're far from ak mags hahaha but again, it's a new gun and at least that's something to hold people over until cz mags become available
Dan Haga is developing a 7.62 lower that accepts AK mags, and AR triggers. Hopefully, it works out for those with a stockpile of ak mags.
Subbed
Bren2 doesn’t like Gen2 PMAGS?
Liked the content! New sub!
You guys need to work on your subtitles... something about liking “penis.” I wish I could add a screen shot. Great video otherwise! Lol...
The barrel length for the bren 2 the 14” 11”and 8” comes in only chambered 5.56 while the 9” 14” 11” is chambered in 7.62 39
Sooo the 14’ can be in 5.56 or 7.62x39?
@@kenneth5034 yes the 14” is in both, they really didn’t do any changes to the bren 2 at all because you go look at the rifles on cz USA it’s still the same
No bren in .308?
Jon.....really? "Thats a no go." LOL I got a new term.
Show the guns / Table top
“Used all around the world and the U.S. as well” 😂😂
The Musik, in background, is like a brainwash....
Naw, fuck the scar.