Review: DeVilbiss GTi Pro LITE Spraygun 1.3 Setup With The T110 Air Cap
HTML-код
- Опубликовано: 28 авг 2024
- Review: DeVilbiss GTi Pro LITE Spraygun 1.3 Setup With The T110 Air Cap
#Passion4Paint merchandise now available head to our site at
teespring.com/...
Developed for busy professional painters needing the ultimate in quality finishes.
All new ergonomic gun body design.
New ultra high flow fluid tips provide superb versatility across a range of viscosities.
Revolutionary air valve design gives smoother feel for even greater air and paint control for ease of fade-outs and blend-ins.
Simplified, user friendly components provide easy cleaning and maintenance.
Precision engineered using lightweight and durable alloy components for a tough spraygun that is 25% lighter than the GTi Pro Digital.
Enhanced ergonomics combined with the GTi Pro’s legendary fit and feel ensure incredible handling and balance.
A coaxial linear air valve eliminates the need for separate air and fluid control valves for a smooth, kick-free trigger action, easy cleaning and maintenance.
Three advanced atomisation technology air caps for perfect paint performance in all climatic conditions.
T110 - Clearcoat (higher solids) and super smooth finishing
High performance Trans-Tech atomisation technology best suited to clearcoating and glosses.
This aircap brings new levels of performance, particularly in the application of the latest compliant clearcoats.
It also scores highly in its ability to eradicate dimple defects that can occur with low solvent clearcoats; does not have the same transfer efficiency of the other caps though.
As OEM finishes are not that smooth, does not always suit such as when using lower solid technology.
Particularly suited to classic car finishers or industrial applications as it applies like glass.
Air consumption: 9.4cfm- 265l/min
/ tonys_refinishing
or like our facebook page
/ tonysrefinishing
/ tonys_refinish
Support our channel in making bigger better content / tonysrefinish
You got the set up right with the 1,3 fluid tip and the T110 cap. I've used this set up for clear coats for ten years without problems. I've have noticed in our bodyshop that the TE20 can sometimes cause solvent popping with heavy applications with certain clear coats, especially in warm weather.
I'm getting solvent pop with 1.2 T110 cap 54% solids?
I found it applied to wet tbh for me
Hi jeff what clear are you using ? Most of the time solvent pop comes from overloading the clear and or not leaving enough flash off between coats
@@TonysRefinishingTV The 1st time spraying with GTI I went same speed as I did the FLG4. Got bad orange peel so next time I slowed down then light orange peel but solvent pop. Gun setting full fan, full fluid 30 psi with 75% overlap 4-5" from panels.
Panel temp. 75 F Med activator
Once again a great review Tony without all the sales pitch just what your veiwers want to know about the gun. Thanks for sharing
+Mark Emmett thanks mark , I don't get paid for any of this so have no reason to sell stuff to people, the guns and products speak for themselves and I just give my opinion and I think that's the best way for people to see them and then decide for themselves where they invest there hard earned cash
just need the FLG5 and the Pro Lite in the booth.
I use the TE20 air cap with the 1.3 fluid tip, fan and fluid wide open to move fast through panels. great gun for the price
thats one thing i need to do with this gun really have a good play with the different caps and see how they all compare love the T110 but i know the others will be good and have there uses too
Muchas Gracias !!
TE20 cap is brilliant for clear
+chris johnson something I need to try more , I've bought one but find I can nail it with the T110 for HS or MS so not really tried it yet
nawet taśny po emblematach nie ununoł z elementów ,mega lakiernik
Hi Tony , your review has dented the loving relationship I have for my bell aria . You were the one guy on RUclips who loved the iwata bell aria as much as me . The gunman's favourite is the pro lite , Matty from backstreet customs the same . Shall I end my 15 year loyalty to team iwata and jump on the devilbiss bus.? Lol . Keep up the great work
+Stuart England lol sorry about that , my Iwata very much is still in use and is my ms clear gun now , the prolite setup I have is specific for the hs hence why it's so great with it , I Wudnt get rid of the Iwata lol but the devilbiss is a better gun to me if I'm honest and well worth a try anyday
thanks for the advise, I will try that!
Very good gun I have one.
It’s good but there’s better out there these days
Thanks for upload,may i ask if this gun can be used for solid gloss colours ?thanks
Hello Tony,I haven't seen you post any new video's lately.Which gun do you say is better atomized the (flg 5)or the devilbiss pro lite with the( t110 cap),& which gun waste"s more material..?
Excellent, that looks like the the clear for my job then. I'm using a Nexa Base coat which says if I use an HS clear then the base needs to be activated. I'd guess this is the same if I use a non Nexa clear? The job is a restoration of an E type Jag with a bare metal full paint so gonna be busy. Hope 'ya don't mind the questions I'm sure there'll be more. Cheers again man, the vids and editing are great by the way.
I recently bought this cap to spray 2k UHS clear. I set the gun to 2 bar or 28/29psi but whenever i spray i ended up qith a lot of air/gas in the clear and then it disspaears after a couple of seconds. Fluid is nornally turned out 2 whole turns. Any idea what could be causing it? Too high pressure or too much material? If i turn the pressure down to 22/24psi then its okay but the atomisation isnt as great
Девилбисс рулит)
Nice
good video you came gun man reccomended so we chk'd it out
thanks for popping over and checking us out hope you enjoyed
pistoletem wykurza po połowie elementu mega zajebiście
I still use my FLG4 gun, performs as good as the day i bought it, I use tht for both base /clear with my different caps w/the Dekups system. Hasn't failed me yet.
I have a flg4 also and ,have yu ever change the seal in your paint gun I can't seem to find no kit for my flg4,it's hard for me to get a glass finish wat set up are yu using
Solid
I have a flg4 also and for some reason I can't seem to get a glass finish
+Roody Beauchamp hi for parts try www.spraygunsdirect.co.uk they ship worldwide and have an extensive range of parts if you can't find what your looking for give them an email and I'm sure they could help you out , as for setup the Peugeot videos have my setup detailed in them which may help you out as each material has a different setup , hope this helps
+Roody Beauchamp an flg 4 and the prolite are very different guns the prolite is at the high end of the spray guns and the flg range is the lesser priced end of the guns for an ultimate finish like glass then you would need to look into the higher end of the spray guns available
Excellent info as usual!!!
Tony would you say the devilbiss dv1 b1 is better than the gti pro lite te10 for base??I'm looking for a new gun but find it hard to look past lights..plus they're cheaper!!!!
Hi Tony good vid that one,what set up would you recomend to achieve factory chunky type finishes with ease,i use w400 for clear and older type gti for base
+steve ruf i ru the same set up full fan ect but i run the gun at 1.8 bar instead of 2.0 for the factory look, the other option is to run the same pressure but take your gun that touch further back from the panel and thats will do the same
try the te20 for hs clear. i use my te10 gun for base and te20 gun for all my clear coat.
+Troy Beauchamp I've just bought a te20 cap so as soon as I get the chance to try it il see what it's like
hi tony, great video, would you recommend the T110 aircap for 2k direct gloss or does devilbiss make a cap better suited for direct gloss?, many thanks as always
t110 for any top coat for me gloss clear ect
@@TonysRefinishingTV thanks for the reply, very much appreciated
How would the t110 handle pearls or Metallics? I know it says hs clear but wondering what the result would be?
Good day, I have 2 Devilbiss 2000 Millenium GTI spray guns (gravity and pressure feed) and I want to have GLASS PERFECT result with waterbased polyurethane. Can I use a 1.3 tip with T110 air cap on these guns, since this seems the perfect setup for clear coat ?
thanks mate, so Im guessing it says high efficiency on the air cap it self and not just trans tech. just got myself a pro lite gun and was just doing some research into the air caps, as there so expensive I wouldn't want to make the wrong decision.
+Premier fake scratch card reaction that's no problem mate and yes they are expensive that's why I just ordered mine with the setup I most wanted and then bought other caps second hand to try them but this cap is my go to cap no matter what the job
Looking good looks good I purchase one with this same set so do you think I’ll be happy with anyone has ideal I’m looking at the flg5 also
I’m having trouble knowing what adaptor I need to add the pps option to my Devilbiss GTI Pro Lite. Any ideas which adapter I need? Is it a #15 -TIA
Gotta be honest mate I have no idea at all
Hey Tony you said on your first coat of clear you have your fluid out 1.25 turns out and on the second coat about 2.5 turns out?
honestly this video is a long time back lol , it was a cold day on this day so used a fine wet closed coat for the first just to give grip to the heavier second finish coat
Tonys_Refinishing what have you been doing nowadays as far as your adjustments? I’ve been doing the 1.3/4 turn on the first coat and 2.5-3.0 turns out on the second.
I don’t use a prolite atm mate I’m trying a lot of different ones
Great video tony. What do you think of the TE20 tip?
+Negas Alleyne hi, ive only used the t110 currently as its the exact setupi bought the gun for , but i will be buying the other caps soon when funds allow and reviewing them all as requested by viewers like yourself
+Tonys_Refinishing ok great I will continue to watch your videos to see the reviews
first u spray those inner things and the edges. and dont stop at the end of the part but in the middle and take the next part half with u.
Is this the real DeVilbiss or the replica? I bought 2 of the replicas on eBay waiting for them to come in the mail. I got one with the T110 1.3 and the other is a HE20 nozzle. I am going to use one for paint and one for clear which one do you think I should use for paint and clear? right now I have 2 Primer sealer guns. I have 1 Iwata 100 for jams fenders and small bumper blends. and I have just 1 gun for paint and clear together it sucks to completely strip it down and clean the paint out of it so then I could use it for clear. I am also going to be switching to PPS cups soon also I do lease returns for a client at home do like 3 cars a week right now looking to get a real garage so I can start doing 5 or 6 a week and start racking in the big bucks
Tried the Pro Lite for clear coat on mobile Smart repairs. It worked well for a time, but suddenly can't get a decent spray pattern from it. At usual setting it is heavy top and bottom and dry in the centre. Changed seals and baffle, but no different. Any ideas what might be wrong?
Sounds like one of the holes in the air cap is clogged.
Hi, i have very important question about T110 and TE10 aircaps.For base coat, which aircap gives less overspray (dust), TE10 or T110?
Couldn’t give you any real advice there tbh mate as I’ve never used the te10 I only ever really got on with this gun in a t110
great vid, all of your vids are great actually I have been really enjoying your channel. I love my pro lite and for a factort peel use the te10 for ms clear, te 20 for hs clear but for a glass looking full respray the t110 aircap is the one to use its brilliant. never sprayed base through mine it's a dedicated clear gun I use an sgk 600 ( Flg5) for base and can't fault it, great work horse. Cheers
+Brendan Weicks thanks Brendan that's great to hear , and yeah I have 2 flg5 guns love them lol I'm looking into more caps just for the purpose of trial really rather than continued use
Out of all the guns you have used now, would the t110 give the finest finish ?
i love the prolite and personally for the money vs finish yes id agree
hi Tony, I was just wondering are you using the old trans tech PRO-100-T110-K air cap or the new high efficiency PRO-102-T110-K air cap, thanks.
+Premier fake scratch card reaction hi this is the new prolite with the new t110 air cap mate the high efficiency one
I have been out of painting since acrylic lacquer was the ticket. As I watch you paint I notice there's no problem keeping a wet edge. Is this just the nature of the newer paints or was I just that bad?? Thx mate
It's mostly acrylic urethane or polyurethane enamel now days, they stay wet depending on the hardeners and reducer temps
Thank you
you're very welcome Jeff
Think that's along time,I can remember painting sides on Rolls-Royce in single coat acrilic and flatting down between coates valintins if anybody is old enough to remember.
Hi Tony,what make of Basecoat do you use and also what gun and settings do you recommend?...Many Thanks
i use alsorts base wise tbh, gun wise for base i love my iwata bellairia
2 bar with triggered pulled or 2 bar of pressure just on the gun air inlet with triggered not pulled?
Always with the trigger pulled buddy
Hello tonys what kind of transparent use in this video? Uhs o hs? I'm also thinking of using the t110 but I'm not sure of its effectiveness.
what do you think about it?
+Matteo Secci love the t110 for this gun , and Quartz liquid glass is he clearcoat
Would the te10 be OK for clear
What differences comoarednto TE10 aircap?It pays to buy t110 for hs clear if i already have te10?
t110 gives a flatter finish
Hi how much difference is there between the t110 and the te10 cap for getting clear flat?
I was after buying the gti pro lite with t110 1.3 for the flat finish in clear.contacted spray direct and guy there has told me 100% that they are the same cap now so I bought gti pro lite te10 1.3mm.
Watching all the videos now looks like the guy is talking bollucks….
Anybody got the answers?
TE10 AND T110 ARE NOT THE SAME CAPS MATE I CAN ASURE YOU THAT YOU WERE RIGHT YOU WANTED THE T110 FOR FLAT CLEAR
how far out from flat is the te10?
I would of done that myself but they only had one gun left in the steam punk (professor) limited edition and it had a Te10 Base air cap, so went for it but have to order T110 air cap separate for lacquer
+Premier fake scratch card reaction personally I'd try and look for one second hand first if you can wait and then if not go for a new one mate that's what I did I found the other caps to try through Facebook sites ect and ended up paying as little as £30 for some
Hi Tony good video when you say full fan on the Pro Lite how many turns out on the nob ?????
+nikko68 hi , all the way out till it stops
Tonys_Refinishing nice
How many turns out on the fluid tip? And what pressure?
Thanks
Around 2-3 depending on how you spray and 2.0 bar
Does the HS liquid glass have to be baked or can it air dry?
+Barry Jones we don't have a bake we just have a heater that warms the booth after spraying but I've found it air drys with no issues barry
Good clear gun. thts just me tho.
hi sr i have question ..i have spray gun DeVilbiss Carlofon Edition HVLP Spray Gun GTI-Pro-H1 Air Cap 1.4 Tip..
gun for paint and clear. ok?
+BARBARA CALDERON yes i should think that would be fine the gti pro are a great gun
Thank sr
Do you buff every thing or just spot buffing????
it depends on the job really most i prefer to spot polish if its a factory job, or a full buff for a repaint always
I seen this gun on another view and they told me to get this same set but I see it on ebay it has a t10 2.3 tip they say it is similar to to the t110 what do you think
desi frazier t110. Is their best clear cap
10 out of 10..........are you sure, That means that the pro light is perfection ? Im sure it has something to do with you as well mate
+Tosh twentythree (tosh 23) for me it worked perfect first time out the box brilliant finish limited setup and easy to setup too so for hs clear it's definitely a perfect gun for me , other like Iwata others like sata ect ect but for me this was better than my Iwata for the hs and also half the price of the sata which is another thing to take into account lol for a gun that's in the mid price range then you can't go wrong , I wanted a decent price HS clear gun to run dedicated and this nailed it straight out the box
I wonder how many people spend a fortune buying different guns only to be disappointed , At least you have found your navana
+Tosh twentythree (tosh 23) mate I've had a lot over the years that I hate I'm even going to buy some cheap guns to compare to the big boys in the market just to show how much difference there is , I find I can make almost any gun work but it's ease of use , quality and price that make it good or great to me , the prolite was perfect for what I bought it for , so is my Iwata that I bought for me clear and it's a perfect gun for that the flgs will do anything for the price and as for sata well I can say il buy one coz I think there daft money tbh and can't see them making me that much of a better painter either for the price I could buy a prolite for base and clear lol
I would like to use those gun for my cabinet painting business, what would you recommend? thanks
+cacaali what sort of paint do you use for that ?
I am using water based metallic paint.
Most companies have gun lines for each industry
Is the T110 aircap good for basecoat?
Honestly mate I don’t know I’ve not tried it
What did cal would you recommend for base?
What what?
@@TonysRefinishingTV damn autocorrect. I wanted to know what air cap you recommend for base
honeslty mate im afraid ive never used one for basecoat buddy
how much price devilbiss original product???
im not sure what price they are these days tbh
Hello! It is right to say, 29 Psi at 5 inch to panel?
+benoit lamoureux hi and yes that's what about where I am with it and find it perfect
+benoit lamoureux hi and yes that's what about where I am with it and find it perfect
+Tonys_Refinishing thx i appreciate !
I have the t110 cap.. Got the 1.2 and 1.3 nozzles. When do I use the 1.2 and when do I use the 1.3?
+Jilma Al-hassan personally never used the 1.2 I used 1.3 for hs clear ran a treat , you could maybe use the 1.2 for ms clear and it's thinner so would probably run better through that for a flatter finer finish
Thanks. Used the 1.3 and boy do i love it. Need to practice some more. Thinking about getting the TE20 aircap also. Any thoughts on that?
+Jilma Al-hassan great to hear mate , tried the te20 once for direct gloss and really didn't get on with it at all tbh mate the T110 was my go to setup for anything I found a slight tweak and it just nailed what I was after
t110 trans tech or high efficiency?
t110
Transtech
Hey I want to purchase the same gun with the 1.3 & TE20 cap , what do you think ?
+JOGO hi the prolite is a very very good gun and 1.3 is great for clear personally I went for the t110 and can't comment on the te20 but have heard some very much like that setup
you must be fan becouce this kolour in yellow not mettalic
even though the customer said do not remove the badge tape. Still fucked up you left it there. that shit pisses me off. might as well be working a Macco lmao or in a Spanish garage in NYC. that's on the same level of painting right over bondo without priming it. I don't care about how much I get for the job door handles moldings trim they all come off.
:)
I dont think that's lacquer
clearcoat
i have paynted. iwhas the best. in Pasadena.ca. us
pozostałosci naklejki po emblemacie porażka
Are you eating lunch while speaking?
No back when this was filmed we didn’t have as good equipment as we have now