Better comparison than 99.9% of the other comparison / how to spot a fake videos. Very detailed and informative, thank you. Keep up the good videos 👍👍👍👍
the conclusion is pretty simple- genuine cost 190GBP, counterfeit cost 60GBP. Air cap and the fluid tip are the two atomizing the paint. If you are concerned about the atomizing quality, buy counterfeit gun and original fluid tip with the air cap and you are home- no brainer.
Both are made in asia and one is for the asian market and a direct import. It is the same with the Fluke 17B+ multimeter. It is officialy from Fluke, but only for the asian market. The thing is, if you want to help your financial system, then buy it in your local store, if you want to get same quality for less money, then help the red dragon.
You would think that Devilbiss would come out with an official video documenting the differences of the fake guns to prevent profit loss instead of leaving their consumers to figure it out.
Probably yes probably not, what they done is just a picture with comparison, but chinese have done some good job by now and for the average person is very dificult to notice. They start copying the dv1 right now.
Hi! In these days, the difference you did show us, don`t be whole true anymore.. Those fake guns, have anything the same than the real ones. You must know the spray guns VERY well, that you could see the differences between fake and genuine. Thank you anyway for you video!! Good luck, and God bless..!
It's weird because at first I could tell the anodising was different but tbe fake guns finish looked slightly darker- the opposite initial reaction. But when grabbed both guns and tilted them, the light shifting, made the real gun look slightly darker..Actually a pretty impressive fake. I wonder If they got a flash drive with the cnc instructions of a near completion prototype gun or something? The differences on the exterior look like the fake gun is just a couple matching steps apart, yeah? A+ vid btw, you went into a lot of things the most people would miss thanks.
Thanks for sharing I got the smaller box it look like yours but no cd information disk but name on the handle all label and stickers on the box got a 5% discount certificate for next purchase so I feel I got the real thing thanks for sharing
Hi, great job. I would like to know which product and air pressure regulation would be the most correct for the devilbiss copy. Mine is T110 mouthpiece. Thank you very much and greetings from Spain.
you did a great job comparing these two gun, and I see on your other video that even the spraying is comparable to one another I don't know how this is going to come out to other viewer's but I live on a very tight budget and I won't be using this often enough to spend the big dollar for the original I don't like the idea of buying a fake but I will probably buy the fake so that it doesn't effect the way I live being I live
if you will gonna go on facebook.com/snstuninggarage/ you will gonna find a high quality replica ,wich spray and look like original and i have it for sell ,go there and find the picture where i compare them and i sell them for very good price
Problem with a fake one is that you can't resell it second hand on the internet here in Europe or the US in case you want to get rid of it. You can't sell it as a genuine one and you also can't sell it as a fake one. People might call the cops or whatever if they see the ad and you can be in trouble. A genuine Devilbiss will keep very good value if you keep it in mint condition, so in the long term you won't lose much money.
DAMNIT, I think I just bought a fake. It has DeVilbiss on both sides, but some of the sharpness is there. The nut at the bottom is the same size as the handle. The one I got is black though.
yeah .i know ,i will gonna make another video soon ,that is the new models of fake's,but as long his doing his job i don't mind using it ,as you wiil gonna see in the next video
salut!am si eu o intrebare: daca nu am regulator din acela pe pistolul de vopsit, se poate sa reglez direct din compresor, sau va fi nevoie sa umbul si la surubul de pe pistolul de vopsit? la ce valoare trebuie reglat compresorul, atunci cand vopsesti, daca nu ai manometru si pt pistolul de vopsit? pe pistol scrie max 3 bar.daca reglez compresorul la 2 bari, e ok? reglajul de aer se face cu manerul de la pistol apasat pe jumatate, nu?
da se poate doar daca ai pana in max 5m furtun,iar in caz ca ai mai multi metri trebuie sa ai in vedere ca furtunul expanda la presiune si se strange cand eliberezi presiunea iar pe lungime mai mare ai putea pierde multa presiune si vei fi foarte confuz cum de s-a intamplat de exemplu setezi presiunea la compresor 2 bari iar la capatul furtunului va ajunge intre 1,5 -1,8 depinde cat metraj ai dar ai putea spune ca tu poti folosi furtun scump de vulcanuizare cu insertii care nu expanda,dar cu acela nu prea te misti asa usor ca si cu unul de vopsitorie care este usor maleabil in caz ca vrei sa fi safe sa nu iti explodeze furtunul(se poate intampla ,din cauza ca treci peste el cu masina) poti seta surubul la 8- 10 bari la compresor (aici el se va opri de fiecare data) si nu 12 (presiune maxima suportata de pistoale ,si toate sculele pneumatice) si sa faci reglajele din pistolul de vopsit la 2,0-2,2 bar nu este obligatoriu sa ai manometru dar ar fi bine sa il ai daca vrei sa iti spun restul informatiilor poti sa imi lasi un mesaj cu poza cu pistolul pe facebook pe pagina cu acelasi nume si iti voi putea da mai multe detalii multumesc !
Can you disassemble the gun? I needed to know if mine has a defect or is it the same as every one else. Where you insert the needle, if you remove the hex screw there is a tube that is connected to the trigger and in front of that tube there is a brass piece that unscrews Mine had a little round plastic in front of that piece and it seemed to cause problems in the air fluctuations. If you are able to help I will try to send some images of the parts I am talking. Thank you
The T110 air-cap has two holes on either side of the fluid nozzle not three holes. Please look carefully, Have you sprayed high solids clear with the fake gun?
Well, the two holes in the air-cap on either side of the fluid nozzle of the genuine T110 air-cap have been proven to leave a flatter finish than the three holes of the TE-20, TE-10 and other 3 hole either side of the aircaps for the deVilbiss sprayguns. I have seen sprayguns with many more holes in the aircap either side of the fluid nozzle that to not atomize well. Appreciate all and any other feedback on this fake T110 aircap concerning finish with the high solids clearcoat.
People only care about the finishing quality and they dont bother to buy a stuff with thousand dollar price with the same finishing result. A spray gun doesnt need ultra tech to make. Its only about patent abuse which is wrong according to law.
friend I want to buy a devilbiss gti pro lite I am from Venezuela but a friend is in the north I commented and got one in amazon you can recommend me if it is original or imitation
hello jorge ,my advice is to don't buy that spray gun is a bad copy ,if you realy want to buy i have many models of spray guns for very good price you can contact me here facebook.com/snstuninggarage/ and we can send to you for $170 the the best one in 3 diferent colors (gold ,Sky blue ,black ) check this video to see it in action ruclips.net/video/zsYcxBlanE8/видео.html contact me for more details
Na sua comparação ficou faltando mostrar a PULVERIZAÇÃO da fake e da original.... Por outro lado não reclamo de sair essas replicas, pelo ALTISSIMO VALOR de uma pistola para trabalho. Absurdo os impostos, principalmente aqui no Brasil....
Nu îți pot da un răspuns concret, trebuie îmi explici exact procesul tau de pregătire, aplicare și materialele folosite, pentru a avea un început, nu îți pot da un sfat când nu știu unde greșești
@@SnsTuningGarage salut, am avut săruta vopseaua pe o bara am șlefuit cu apa pana am pierdut dunga de la vopsea, am șters cu degresant am aplicat Fuller am jmirgaluit cu apa dar sa spart stratul de Fuller am șters cu degresant și am vopsit, este din cauza ca să spart stratul de Fuller și am ajuns la plastic? Între timp am refăcut piesa am jmirgaluit, degresant, Fuller și la jmirgaluit am spat iar stratul de Fuller din cauza ca era pe nervura am degresat și am dat cu spray plastic primer, am vopsit și nu sa mai cacartit dar am întâmpinat problema ca nu a ieșit uniform pigmentul pe capota (este vorba de un argintiu) se vad dâre, am tot agitat pistolul în timpul vopsiri ca am văzut video cum se aplica dar degeaba, scuze de mesaj asa lung, pentru tine sunt problema banale, eu sunt la început și as vrea sa vad dacă reușesc sa fac ceva sa nu mai fiu sluga la patron alte piese, alte culori miau ieșit foarte bine, ca oglinda, la asta am probleme și cu curgerea lacului, aștept răspuns si mulțumesc mult ca miai răspuns
@@catalinsentea9072 de obicei când vopsești argintiu și aplici ultimul strat de vopsea diluează vopseaua 90-100 și ridică pistolul 30-40cm de la piesa astfel se va forma mai mult un gaz peste suprafață pentru a îndepărta norii sau dungile , acest termen se numește și egalizarea vopselei, pentru aplicarea lacului îți recomand să lucrezi doar cu un singur lac și un singur pistol pentru lac pentru a știi cum lucrează fiecare și apoi sunt sigur că vei scoate lucrări foarte Frumoase. Mult succes!
the original is three time the price of the fake one, which is rip off any way, if the so called fake one sprays good, that's good enough for me, if not use it as a primer gun, most of us cant spray professional standard any way,
![GTI PRO LITE SAMER CAPABILITY [Review]](http://i.ytimg.com/vi/oA1cWNW8zNk/mqdefault.jpg)
Thank you very much for your time and making this video! I hope you have saved people the anguish from buying the fake spray gun!
More videos will gonna come,because I found lots of fake's stay tuned!!!
Better comparison than 99.9% of the other comparison / how to spot a fake videos. Very detailed and informative, thank you. Keep up the good videos 👍👍👍👍
Thank you for the video. I was about to by a fake one.
I brought 2 of these spray guns. And they are absolutely brilliant for the price.
the conclusion is pretty simple- genuine cost 190GBP, counterfeit cost 60GBP. Air cap and the fluid tip are the two atomizing the paint. If you are concerned about the atomizing quality, buy counterfeit gun and original fluid tip with the air cap and you are home- no brainer.
I hace the high quality replica and does the same job, this video is very old, i change 15 spray guns til now😎
please get something against these fakes.#devilbisseu #devilbissrefinishing They are already going beyond the line. thanks for the video bro!
Both are made in asia and one is for the asian market and a direct import. It is the same with the Fluke 17B+ multimeter. It is officialy from Fluke, but only for the asian market. The thing is, if you want to help your financial system, then buy it in your local store, if you want to get same quality for less money, then help the red dragon.
You would think that Devilbiss would come out with an official video documenting the differences of the fake guns to prevent profit loss instead of leaving their consumers to figure it out.
Probably yes probably not, what they done is just a picture with comparison, but chinese have done some good job by now and for the average person is very dificult to notice. They start copying the dv1 right now.
Thank you for making my video
Great job on the video.. you are correct on everything you are saying. You did a good job.
Hi! In these days, the difference you did show us, don`t be whole true anymore.. Those fake guns, have anything the same than the real ones. You must know the spray guns VERY well, that you could see the differences between fake and genuine. Thank you anyway for you video!! Good luck, and God bless..!
Yes I know, but unfortunately I don't make videos about big brands anymore, instead I do by my own products
It's weird because at first I could tell the anodising was different but tbe fake guns finish looked slightly darker- the opposite initial reaction. But when grabbed both guns and tilted them, the light shifting, made the real gun look slightly darker..Actually a pretty impressive fake. I wonder If they got a flash drive with the cnc instructions of a near completion prototype gun or something? The differences on the exterior look like the fake gun is just a couple matching steps apart, yeah? A+ vid btw, you went into a lot of things the most people would miss thanks.
Thanks for sharing I got the smaller box it look like yours but no cd information disk but name on the handle all label and stickers on the box got a 5% discount certificate for next purchase so I feel I got the real thing thanks for sharing
They discontinued the CD with guns...
i just bought 1 today online ,now i'll now how to check if it's genuine when I recieve it. thanks for your upload !!
First is the packaging and after the other details
Bit late for that
Thank you very much Sir.
Does yours on the hex screw where you insert the needle, the brass piece is all the way in or is it partialy screwed?
Thank you for the video..... the original spray gun cap is full metal? Or it has some plastic parts too?
Is this gun for water based paint only? Or can you use regular paint also?
Hi, great job.
I would like to know which product and air pressure regulation would be the most correct for the devilbiss copy. Mine is T110 mouthpiece. Thank you very much and greetings from Spain.
Thank you.. It helped me a lot 👍👍👍
thanks for watching it!
NICE JOB BRO.....GOOD COMPARATION.....GOD BLESS U
Thank you🙏🏻
Thanks I was about to get one from China not now
thanks for watching!
You can specify which needle size you want so that's not a giveaway.
I was really hoping you did a spray out to compare original to fake
you did a great job comparing these two gun, and I see on your other video that even the spraying is comparable to one another I don't know how this is going to come out to other viewer's but I live on a very tight budget and I won't be using this often enough to spend the big dollar for the original I don't like the idea of buying a fake but I will probably buy the fake so that it doesn't effect the way I live being I live
if you will gonna go on facebook.com/snstuninggarage/ you will gonna find a high quality replica ,wich spray and look like original and i have it for sell ,go there and find the picture where i compare them and i sell them for very good price
Problem with a fake one is that you can't resell it second hand on the internet here in Europe or the US in case you want to get rid of it.
You can't sell it as a genuine one and you also can't sell it as a fake one. People might call the cops or whatever if they see the ad and you can be in trouble.
A genuine Devilbiss will keep very good value if you keep it in mint condition, so in the long term you won't lose much money.
DAMNIT, I think I just bought a fake. It has DeVilbiss on both sides, but some of the sharpness is there. The nut at the bottom is the same size as the handle. The one I got is black though.
yeah .i know ,i will gonna make another video soon ,that is the new models of fake's,but as long his doing his job i don't mind using it ,as you wiil gonna see in the next video
Real guns sell for almost $500.00 fake guns sell from 60.00 to 125.00.
Very good to know. Thank you!
Dock Station you welcome!!!
got to ask do devilbliss boxes look the same in every market?
salut!am si eu o intrebare: daca nu am regulator din acela pe pistolul de vopsit, se poate sa reglez direct din compresor, sau va fi nevoie sa umbul si la surubul de pe pistolul de vopsit? la ce valoare trebuie reglat compresorul, atunci cand vopsesti, daca nu ai manometru si pt pistolul de vopsit? pe pistol scrie max 3 bar.daca reglez compresorul la 2 bari, e ok? reglajul de aer se face cu manerul de la pistol apasat pe jumatate, nu?
da se poate doar daca ai pana in max 5m furtun,iar in caz ca ai mai multi metri trebuie sa ai in vedere ca furtunul expanda la presiune si se strange cand eliberezi presiunea iar pe lungime mai mare ai putea pierde multa presiune si vei fi foarte confuz cum de s-a intamplat
de exemplu setezi presiunea la compresor 2 bari iar la capatul furtunului va ajunge intre 1,5 -1,8 depinde cat metraj ai
dar ai putea spune ca tu poti folosi furtun scump de vulcanuizare cu insertii care nu expanda,dar cu acela nu prea te misti asa usor ca si cu unul de vopsitorie care este usor maleabil
in caz ca vrei sa fi safe sa nu iti explodeze furtunul(se poate intampla ,din cauza ca treci peste el cu masina) poti seta surubul la 8- 10 bari la compresor (aici el se va opri de fiecare data) si nu 12 (presiune maxima suportata de pistoale ,si toate sculele pneumatice) si sa faci reglajele din pistolul de vopsit la 2,0-2,2 bar
nu este obligatoriu sa ai manometru dar ar fi bine sa il ai
daca vrei sa iti spun restul informatiilor poti sa imi lasi un mesaj cu poza cu pistolul pe facebook pe pagina cu acelasi nume si iti voi putea da mai multe detalii multumesc !
So they can fake the gun but not the box?
Can you disassemble the gun? I needed to know if mine has a defect or is it the same as every one else.
Where you insert the needle, if you remove the hex screw there is a tube that is connected to the trigger and in front of that tube there is a brass piece that unscrews
Mine had a little round plastic in front of that piece and it seemed to cause problems in the air fluctuations. If you are able to help I will try to send some images of the parts I am talking.
Thank you
Out there are so many variations of copy, the problem you have is in the middle or back of the spraygun.
thank you dear ...
The T110 air-cap has two holes on either side of the fluid nozzle not three holes. Please look carefully, Have you sprayed high solids clear with the fake gun?
Well, the two holes in the air-cap on either side of the fluid nozzle of the genuine T110 air-cap have been proven to leave a flatter finish than the three holes of the TE-20, TE-10 and other 3 hole either side of the aircaps for the deVilbiss sprayguns. I have seen sprayguns with many more holes in the aircap either side of the fluid nozzle that to not atomize well. Appreciate all and any other feedback on this fake T110 aircap concerning finish with the high solids clearcoat.
People only care about the finishing quality and they dont bother to buy a stuff with thousand dollar price with the same finishing result. A spray gun doesnt need ultra tech to make. Its only about patent abuse which is wrong according to law.
That's correct John I'm counting on this because soon I'm gonna launch my spray guns collection
I have my 99$ chinnesse one , and I love it!
Where you bought yours, the original one?.
please show spray pattern
friend I want to buy a devilbiss gti pro lite I am from Venezuela but a friend is in the north I commented and got one in amazon you can recommend me if it is original or imitation
hello jorge ,my advice is to don't buy that spray gun is a bad copy ,if you realy want to buy i have many models of spray guns for very good price you can contact me here facebook.com/snstuninggarage/
and we can send to you for $170 the the best one in 3 diferent colors (gold ,Sky blue ,black ) check this video to see it in action ruclips.net/video/zsYcxBlanE8/видео.html
contact me for more details
Hi, how does the copy work, compared to the original?
We have a new version of that in this video ruclips.net/video/zsYcxBlanE8/видео.html
@@SnsTuningGarage no
Na sua comparação ficou faltando mostrar a PULVERIZAÇÃO da fake e da original.... Por outro lado não reclamo de sair essas replicas, pelo ALTISSIMO VALOR de uma pistola para trabalho. Absurdo os impostos, principalmente aqui no Brasil....
I know you've use it, how it performs, the china made gti pro lite?
Not all of them are good, the new model i sell is very good ,but be careful what you buy from others
Sns Tuning Garage how much for the fake one do you sell it? and 1 to 10 how do you rate it?where can i buy it?
I've been looking online at guns and I'm not seeing pics of the boxes.
you won't until it arrives at your house. Sometimes the pic online is real and not the same as they send you
If they could easily make fake a spray gun, how much more they could fake a spray gun box.
Salut, ma poți ajuta și pe mine cu un sfat, de ce mi se cacarteste(se umfla) vopseaua după ce o aplic....?
Nu îți pot da un răspuns concret, trebuie îmi explici exact procesul tau de pregătire, aplicare și materialele folosite, pentru a avea un început, nu îți pot da un sfat când nu știu unde greșești
@@SnsTuningGarage salut, am avut săruta vopseaua pe o bara am șlefuit cu apa pana am pierdut dunga de la vopsea, am șters cu degresant am aplicat Fuller am jmirgaluit cu apa dar sa spart stratul de Fuller am șters cu degresant și am vopsit, este din cauza ca să spart stratul de Fuller și am ajuns la plastic? Între timp am refăcut piesa am jmirgaluit, degresant, Fuller și la jmirgaluit am spat iar stratul de Fuller din cauza ca era pe nervura am degresat și am dat cu spray plastic primer, am vopsit și nu sa mai cacartit dar am întâmpinat problema ca nu a ieșit uniform pigmentul pe capota (este vorba de un argintiu) se vad dâre, am tot agitat pistolul în timpul vopsiri ca am văzut video cum se aplica dar degeaba, scuze de mesaj asa lung, pentru tine sunt problema banale, eu sunt la început și as vrea sa vad dacă reușesc sa fac ceva sa nu mai fiu sluga la patron alte piese, alte culori miau ieșit foarte bine, ca oglinda, la asta am probleme și cu curgerea lacului, aștept răspuns si mulțumesc mult ca miai răspuns
@@catalinsentea9072 de obicei când vopsești argintiu și aplici ultimul strat de vopsea diluează vopseaua 90-100 și ridică pistolul 30-40cm de la piesa astfel se va forma mai mult un gaz peste suprafață pentru a îndepărta norii sau dungile , acest termen se numește și egalizarea vopselei, pentru aplicarea lacului îți recomand să lucrezi doar cu un singur lac și un singur pistol pentru lac pentru a știi cum lucrează fiecare și apoi sunt sigur că vei scoate lucrări foarte Frumoase. Mult succes!
GTI PRO LITE What does it mean?
Good video hand how does the original look and wath is the difference?
I have shown in the video the fake and the original
@@SnsTuningGarage i don't speak english, i use a translator
Sata jet 5000 fake vs devilbiss fake....which the better one?
Both are good ,the painter make the difference!
@@SnsTuningGarage agree
as vrea sa cumpar si eu dar nu stiu pe care,daca nu e diferenta mare as opta pt cel original😊
why did not you show us how to paint theese sprayguns.
Here is the link ruclips.net/video/th6VDCxaHfw/видео.html
Can you pls tell me where can i buy the original one
Where are you from?
Im from Philippines.
Spraygunsdirect website. They are in UK
1.5 x speed you’re welcome
Thank
thank you for watching!
where do you buy the fakes and the originals?
we can help you with a better version of the replica, the original you can find it on eBay or spraygundirect
Check our website!
snstuning.co/collections/spray-painting/products/cosmic-tts-spray-gun-1-3-nozzle
Great information, thanks a lot... How about the performance? waiting the second part of this.
I already have done the second part
good?
salut,cat costa cel original si cat costa replica?
poti intra pe pagina de facebook sns tuning si discutam acolo detaliile
nu am facebook,un nr de whatsapp imi poti da sa vb acolo?
I can make the same money outta both of them ..👌👌👌👌
word
show us the Anest Iwata Balleria. I think there are a lot of fakes of this gun.
Unfortunately they made only for the w101 i don't know about the rest
Ebay sells a lot of fake items, how are they even allowed to sell this fake items.
so can i buy the fake one.. i Don have too much money...
Yes of course! Contact us
@@SnsTuningGarage can you tell me the effect between fake and original...
@@hiunghiung6509 what do you mean by effect?
@@SnsTuningGarage spray effect
@@hiunghiung6509 by this you mean ,spray fan ?
Still have access to these?
We have on sale ,let me know if you would like,i will give you more details.
Sns Tuning Garage I am interested, do you feel the quality is good & holds?
Sns Tuning Garage I do want one
Oh yeah mine came with a wrench and seals
the original is three time the price of the fake one, which is rip off any way, if the so called fake one sprays good, that's good enough for me, if not use it as a primer gun, most of us cant spray professional standard any way,
We have other model check it out !
snstuning.co/collections/spray-painting/products/cosmic-tts-spray-gun-1-3-nozzle
Salut! Am auzit ca vinzi astfel de pistoale, as dori unul.
facebook.com/snstuninggarage/
contact me
mar interesa sa cumpar si eu acest pistol cum pot lua legatura cu tine un nr de telefon daca se poate
poti intra pe pagina de facebook sns tuning si discutam detaliile acolo,multumesc
Lol😂 Dont know how a supposedly genuine and fake product can be compared against each other when they are both made in the same asian country.
Shhhh🤫 not all the people have to know that!😂
The fake will not last very long.
binisay,a lang mig
Ca nu am inteles nimic .
Clipul a fost făcut pentru cei ce vorbesc engleza că și multe altele tutoriale de pe canalul meu.
@@SnsTuningGarage Desigur ,telefonul scrie in numele tau .
1.tree
the fake one look the pakage is better
the carton box have the same quality like the original one
Poor presentation, to much moving what is interesting not a smaller or greater nu and so on.