I can't believe you made this video (which is the best video on RUclips describing the whole process) a week after I installed mine haha Nevertheless, it will be useful because I'll need to take my dashboard out (to replace my old broken one) and I got a better idea of how to go about it now, thank you! (Yea, I didn't take my dash out to put the wire in the white plug, my hand was all bruised, needless to say)
No worries mate! Thanks for the comment, im so glad it’s actually helping people out, the whole filming process was very crude so the fact that it all came together and you can actually understand what im waffling about is a miracle 😂
@@tanyzampa3414 i just got it off eBay, some guy bought a kit but couldn’t be bothered to install it so i bought that, the cable is linked in another comment here and you can use 6r cruise control stalks, mine are from a 2013 fabia
Could you please explain me what connectors from video are used for what? This first connector on the steering wheel on 6:15 is factory connector or the one you got with cruise control wiring harness? The second red connector on 7:10 is used for? And the white connector under the dashboard on 7:20 is factory connector which you used to connect wire to pin 4 on the pink connector on 7:40? Where is the 20 pin connector of the wiring harness that you bought on the ebay?
Apologies, but I've watched your video several times and couldn't get it where on the video you have connected 20-pin connector from wiring harness (Kufatec loom) you bought on ebay?
Hi there mate, if the video is not clear enough, there is a guide which i followed linked in the description, that should clear everything up. Thanks for watching.
@@tomharvey I've read the tutorial from ukpolos forum but it has just few pictures. I didn't recognize Kufatec loom neither on your video neither on forum tutorial. Where is it on your video which part?
The plug from the kufatec loom plugs into the central electrics module, there will be an empty space for it. if you read the guide you will be able to find the location. www.clubpolo.co.uk/topic/309747-cruise-control-retrofit-guide-for-vw-polo-9n9n3/ socket 'XS3'. There is a clear image on the site too.
Hello mate again, you said earlier that you used genuine stalks from 2013 Skoda Fabia for this cruise control retrofit. Have you done any modifications on the Fabia stalks or on your genuine T41 plug of your Polo because Fabia stalks ( Cruise Control switch) use 3 pins for Cruise Control instead of 6 pins that the Polo 9N stalks use?
@@tomharvey o módulo de injeção do motor fica na parte do cofre perto da bateria nele tem um adesivo indicado a versão essa versao 7.5.10 não suporta o cruise control enquanto a 7.5.30 suporta
What about wiring? How long should be wires from cruise control lever to BCM? Because I'll buy second hand genuine cruise control lever. And second hand cruise control lever comes mostly without any wiring or with short cut wires
@@tomharvey Yeah, that loom is not expensive, but my genuine left lever (deep/high beams) is dead and I don't have so much time to wait (minimum 1 month) that loom to arrive to my country. So I will try at local second parts stores to find original wiring harness with cruise control stalk. How long should be the wiring harness - would 4-5 feet (1,5 meter) be enough to connect cruise control stalk with BCM?
@FreeStylerBG I wouldn't want to tell you for certain, in case I'm incorrect, I would advise ordering the harness direct from Kufatec’s website, it will arrive the next working day.
I could see in comments that you or someone else says that cruise control stalks of some other VAG models could be used like Polo 6R, Ibiza 6L, 6J, Fabia 6Y, 5J. Are they all compatible (fit on steering wheel like genuine Polo 9N3) with Polo 9N3 and both cruise control (turning blinkers) left lever and board computer right lever will work with all factory functionalities?
Not too sure mate, my stalks are from a 2013 Skoda Fabia, they can also be likely taken from a Polo 6R ('10-'13), or possibly an Ibiza. have a look around and see which ones look similar to the ones I have.
@@tomharvey I've asked local VAG second parts seller and he told me that stalks from Fabia 2013 or Polo 6R physically fit Polo 9N steering wheel but not sure are the connections and wires the same.
Hello, I have Polo 9N3 1.4 TDI Sport 2006 with 6Q1 937 049 D central control module. Is there any way that I could connect wires from Cruise Control lever to BCM without taking hole dashboaard out? Also I've read somewhere that some Skoda Fabia MK1 with Elegance trim had preinstalled cruise control wiring and only new cruise control lever shoould be replaced. Does that apply for Polo 1.4 TDI with higher Sport trim?
All polos will need wiring, you can do it with the dash in if you have freakishly small child hands but I don’t unfortunately 😂 Dash out is also the best way to run the wires neatly
Hiya mate, my Pioneer came with the frame, although you should be able to buy a fitting kit from pioneer, i know halfords do universal 2din ones too. Also maybe try dynamicsounds.co.uk, they always have plenty of stuff. cheers!
if your CECM (BCM) starts with 6Q1 it should be compatible 6r/6c one works, or the correct 9n/9n3 one, i used a 6r one as the 9n ones are extremely hard to find.
Im planning on installing fog lights on my 9n but need to run a wire from bulkhead to lightswitch. Is there any way at all to reach the bulkhead without removing the entire dash?
Id just remove the dash, i can imagine it’s possible, my hands are definitely too big though 😂 my dash removal in this video was the first i’d ever done, and it was super easy.
There's a grommet in the passenger footwell behind the ABS, can get a wire through there then run it inder the dash to the lightswitch, I've used that place for a Sub wire and boost gauge line
Gostei do teu trabalho 😂 olha comprei um vw polo 9n3 1.2 12v achas que consigo ativar funções, tipo descer vidros com o comando?😏 qual a melhor app para essa função obrigado...
The name of the wiring harness is Kufatec. it is available from their website here: www.kufatec.com/en/assist-park/cruise-control/cable-set-cruise-control-for-vw-polo-9n-seat-ibiza-6l-33723 Next day delivery is also available. Cheers.
Hi mate, my stalks were from a 6r and my loom is this one : www.ebay.co.uk/itm/Original-Kufatec-GRA-Cruise-Control-Wiring-Harness-Cable-for-VW-Polo-9n-Seat-Ibiza-6l-/401600509205?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=707-127634-2357-0
Sorry mate got too excited and forgot to record the re-assembly, just follow the steps in reverse order to put it back together, its fairly self explanatory anyway.
@@tomharvey ok amigo, é que sou do Brasil possuo um polo 9n sedan e não tem o cruise control estou querendo instalar mas nao tenho informações por aqui só na gringa mesmo, o que eu queria saber e se ele mostra no painel quando esta ativado o ícone verde q fica em cima do ícone do highbean. Grato
@@matheusgomes2179 Hi mate, it doesn’t come up with the light, but still works perfectly, you will need clocks from a cruise control model if you want the light. But in my opinion there’s no point, if it works it works.
@@tomharvey ok amigo e q o meu tem um ícone onde o painel mais moderno fica o do cruise control acho que é o mesmo ícone por isso queria saber se instalando tudo ele também ascenderia, mas é como voce disse se funciona funciona 😂aqui não temos a versão diesel só a gasolina e etanol e não temos muitos opicionais a nossa disposição kkk
@@matheusgomes2179 yeah mines a 1.4 petrol, bud engine code, doesnt have to be a diesel for it to work, its definitely worth the £70 i spent on it all together
![►VW Scirocco III/Golf V/Golf VI◄ Tempomat nachrüsten [Retrofit Cruise Control] ◢WERKSTATT-TV◣](http://i.ytimg.com/vi/7j7o0j9reI8/mqdefault.jpg)
I can't believe you made this video (which is the best video on RUclips describing the whole process) a week after I installed mine haha
Nevertheless, it will be useful because I'll need to take my dashboard out (to replace my old broken one) and I got a better idea of how to go about it now, thank you! (Yea, I didn't take my dash out to put the wire in the white plug, my hand was all bruised, needless to say)
No worries mate! Thanks for the comment, im so glad it’s actually helping people out, the whole filming process was very crude so the fact that it all came together and you can actually understand what im waffling about is a miracle 😂
from sudan with love
THANKS I FOLLOWED YOUR VID AND IT HELPED ME MAKE THE MOD POSSIBLE. THANNKS
Glad i could help mate, Cheers!
can we install a cruise control when we don't have one? thank you brother
Yes mate, that’s exactly what i did here, i had a standard polo match and installed the stalks and loom from kufatec
@@tomharvey oh ok thank you so much bro! and can you tell me where you bought the new cruise control? thank you brother
@@tanyzampa3414 i just got it off eBay, some guy bought a kit but couldn’t be bothered to install it so i bought that, the cable is linked in another comment here and you can use 6r cruise control stalks, mine are from a 2013 fabia
Could you please explain me what connectors from video are used for what? This first connector on the steering wheel on 6:15 is factory connector or the one you got with cruise control wiring harness? The second red connector on 7:10 is used for? And the white connector under the dashboard on 7:20 is factory connector which you used to connect wire to pin 4 on the pink connector on 7:40? Where is the 20 pin connector of the wiring harness that you bought on the ebay?
If you follow the video and order the harness, you will be able to install cruise control.
Apologies, but I've watched your video several times and couldn't get it where on the video you have connected 20-pin connector from wiring harness (Kufatec loom) you bought on ebay?
Hi there mate, if the video is not clear enough, there is a guide which i followed linked in the description, that should clear everything up. Thanks for watching.
@@tomharvey I've read the tutorial from ukpolos forum but it has just few pictures. I didn't recognize Kufatec loom neither on your video neither on forum tutorial. Where is it on your video which part?
The plug from the kufatec loom plugs into the central electrics module, there will be an empty space for it. if you read the guide you will be able to find the location.
www.clubpolo.co.uk/topic/309747-cruise-control-retrofit-guide-for-vw-polo-9n9n3/
socket 'XS3'. There is a clear image on the site too.
@@tomharvey Thanx
Hello mate again, you said earlier that you used genuine stalks from 2013 Skoda Fabia for this cruise control retrofit. Have you done any modifications on the Fabia stalks or on your genuine T41 plug of your Polo because Fabia stalks ( Cruise Control switch) use 3 pins for Cruise Control instead of 6 pins that the Polo 9N stalks use?
these are fabia stalks, they work fine
Boa noite amigo qual o número do módulo de injeção do seu carro é o 7.5.10 ou 7.5.30 ?
No idea, sorry
@@tomharvey o módulo de injeção do motor fica na parte do cofre perto da bateria nele tem um adesivo indicado a versão essa versao 7.5.10 não suporta o cruise control enquanto a 7.5.30 suporta
Im not too sure what you mean mate, the link in the description (clubpolo) covers compatible versions, and mine was compatible based on that.
What about wiring? How long should be wires from cruise control lever to BCM? Because I'll buy second hand genuine cruise control lever. And second hand cruise control lever comes mostly without any wiring or with short cut wires
Get the kufatec loom linked in my reply to someone else’s comment, not worth fabricating your own loom for the sake of £20
@@tomharvey
Yeah, that loom is not expensive, but my genuine left lever (deep/high beams) is dead and I don't have so much time to wait (minimum 1 month) that loom to arrive to my country. So I will try at local second parts stores to find original wiring harness with cruise control stalk. How long should be the wiring harness - would 4-5 feet (1,5 meter) be enough to connect cruise control stalk with BCM?
@FreeStylerBG I wouldn't want to tell you for certain, in case I'm incorrect, I would advise ordering the harness direct from Kufatec’s website, it will arrive the next working day.
I could see in comments that you or someone else says that cruise control stalks of some other VAG models could be used like Polo 6R, Ibiza 6L, 6J, Fabia 6Y, 5J. Are they all compatible (fit on steering wheel like genuine Polo 9N3) with Polo 9N3 and both cruise control (turning blinkers) left lever and board computer right lever will work with all factory functionalities?
I have now retrofitted the trip computer with mpg gauge etc if you’d like me to make a video on it, and yes my stalks are from a ‘13 fabia. Cheers!
@@tomharvey
Genuine stalks from Fabia 5J fit perfectly on the steering wheel as the genuine one from Polo 9n3?
Not too sure mate, my stalks are from a 2013 Skoda Fabia, they can also be likely taken from a Polo 6R ('10-'13), or possibly an Ibiza. have a look around and see which ones look similar to the ones I have.
@@tomharvey
I've asked local VAG second parts seller and he told me that stalks from Fabia 2013 or Polo 6R physically fit Polo 9N steering wheel but not sure are the connections and wires the same.
@@FreeStylerBG I have 2013 Fabia stalks on my car. They work fine, they are the ones featured in this video
Hello, I have Polo 9N3 1.4 TDI Sport 2006 with 6Q1 937 049 D central control module. Is there any way that I could connect wires from Cruise Control lever to BCM without taking hole dashboaard out? Also I've read somewhere that some Skoda Fabia MK1 with Elegance trim had preinstalled cruise control wiring and only new cruise control lever shoould be replaced. Does that apply for Polo 1.4 TDI with higher Sport trim?
All polos will need wiring, you can do it with the dash in if you have freakishly small child hands but I don’t unfortunately 😂 Dash out is also the best way to run the wires neatly
Really good job! Where I can get cruise control cable diagram?
Thanks mate! If you check the links in the description, everything you need should be there, thanks for watching👍
Where can i find the pioneer frame ?? i have one too but it looks awkvard without the frame
Hiya mate, my Pioneer came with the frame, although you should be able to buy a fitting kit from pioneer, i know halfords do universal 2din ones too.
Also maybe try dynamicsounds.co.uk, they always have plenty of stuff.
cheers!
Hello my car is 9n2 bby 1.4 gasoline can i do this?
And also i need 6r or 6c combination switch right?
if your CECM (BCM) starts with 6Q1 it should be compatible
6r/6c one works, or the correct 9n/9n3 one, i used a 6r one as the 9n ones are extremely hard to find.
Im planning on installing fog lights on my 9n but need to run a wire from bulkhead to lightswitch. Is there any way at all to reach the bulkhead without removing the entire dash?
Id just remove the dash, i can imagine it’s possible, my hands are definitely too big though 😂 my dash removal in this video was the first i’d ever done, and it was super easy.
@@tomharvey how long you think it took you? Looks like soo much work
There's a grommet in the passenger footwell behind the ABS, can get a wire through there then run it inder the dash to the lightswitch, I've used that place for a Sub wire and boost gauge line
@Collen5054 good luck!
Bonjour avez-vous le plan d’installation du faisceau électrique merci
Vérifiez la description de la vidéo mon ami
Would it be the same process on a Polo 6r/6c?
probably not mate, worth doing some research into that 👍
Gostei do teu trabalho 😂 olha comprei um vw polo 9n3 1.2 12v achas que consigo ativar funções, tipo descer vidros com o comando?😏 qual a melhor app para essa função obrigado...
não tenho certeza se isso é possível, desculpe. obrigado por assistir.
cant it be mapped in ?
You have to code it in yeah
hello, i'm from brazil, where can i find these flashlight models
I just got mine from ebay. Cheers!
@@tomharveythanks and congratulations for the videos
what is their name?
The name of the wiring harness is Kufatec. it is available from their website here:
www.kufatec.com/en/assist-park/cruise-control/cable-set-cruise-control-for-vw-polo-9n-seat-ibiza-6l-33723
Next day delivery is also available. Cheers.
Have you got a link to where you got the wiring and the stalks mate
Hi mate, my stalks were from a 6r and my loom is this one : www.ebay.co.uk/itm/Original-Kufatec-GRA-Cruise-Control-Wiring-Harness-Cable-for-VW-Polo-9n-Seat-Ibiza-6l-/401600509205?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=707-127634-2357-0
@@tomharvey thanks mate looking to do it to my 9n iv done some 9n3 heated leather retro fit witch wasn't to bad
@@steven87005 ahh yeah id love to do that but heated seats are a pain to get
@@tomharvey how did you code the cc in as I thought when its done you have to code it in with vagcom or something
@@steven87005 yeah you gotta code it in with vcds all the codes and that are in the clubpolo page
do more mods bro, just subscribed
Ill get some more bits ordered, thanks mate I really appreciate it 👍
Posta a segunda parte irmão
Sorry mate got too excited and forgot to record the re-assembly, just follow the steps in reverse order to put it back together, its fairly self explanatory anyway.
@@tomharvey ok amigo, é que sou do Brasil possuo um polo 9n sedan e não tem o cruise control estou querendo instalar mas nao tenho informações por aqui só na gringa mesmo, o que eu queria saber e se ele mostra no painel quando esta ativado o ícone verde q fica em cima do ícone do highbean. Grato
@@matheusgomes2179 Hi mate, it doesn’t come up with the light, but still works perfectly, you will need clocks from a cruise control model if you want the light. But in my opinion there’s no point, if it works it works.
@@tomharvey ok amigo e q o meu tem um ícone onde o painel mais moderno fica o do cruise control acho que é o mesmo ícone por isso queria saber se instalando tudo ele também ascenderia, mas é como voce disse se funciona funciona 😂aqui não temos a versão diesel só a gasolina e etanol e não temos muitos opicionais a nossa disposição kkk
@@matheusgomes2179 yeah mines a 1.4 petrol, bud engine code, doesnt have to be a diesel for it to work, its definitely worth the £70 i spent on it all together
is that possible to do on 1.2 bbm engine?
Hi Mate, I believe it is but you will have to change the BCM/CECM as yours is not compatible. Cheers!