Hi Ian i would say headers, exhaust, yolks, forks then the wheels, yep your right its looking like a bike again and i'm with everyone else "i can't wait to see the start up" it has to be live recorded and don't edit any grizzly bits out it has to be as it is weather it starts or not ha ha, i love these videos on a Sunday night i get in have a glass or two of whisky and watch intensively....
Hi Skoots, Might have something different lined up for the front end but nothing set in stone just yet. Loving the idea for the first start, I might even try and do a proper live broadcast straight from the garage at 9pm (bet the neighbours will love me 😂) what could possibly go wrong 🙈
Need to get that front end on and rear wheel on make it look like a bike again haha But looking really good can't wait to here is first start up once all finished
Another good video, I think you should get the front end all on and same with the rear, me and my dad are rebuilding his Amber brown bandit just now and that’s the stage we’re at
Classic motorbikes ahhh well, it’s the beauty of any build isn’t it? If nothing went wrong, we’d all be doing it and it’ll be boring then! Haha Hope you get her sorted and can’t wait for that video! Keep up the great work!
I can't wait for you to get the ignition side of things sorted and some fuel and start it!!!! What's the plan for the headers/can...standard or the old system or something fancy?? Last few days have been warm and I haven't been off mine 😎 Great video again thank you.
Just a little jealous, would have loved to have been out on the bike but as you can see needs a couple bits and bobs 😱 I'm going to stick with the Max Torque Cans 4-2-1 full system they made for the bike last year as it made good power on the dyno and I love how it looks on the bike
Might of missed it. What tools did you use to get the exhaust header bolts out? Doing my B6 in the near future and some of them look really tight to get at. Cheers and luv the show
The stock shock is new from Series 1 and works great for me on the road. I haven't rebuild the forks with any after market parts, but I do fit a USD front end that I adjust to work for me on the road.
Hi Mike, sorry on the slow reply, I started a new job in November last year and I've been flat out since. The flasher replay is on the left hand side under the rear panel. Ian
I love this series, gives me hope to do a complete tear down on my 1200N. Thanks man.
Great videos - bingeing on them now. I have a 97 B12 so this is all very interesting
Glad you are enjoying the videos Gary, I hope you find them useful
Hi Ian i would say headers, exhaust, yolks, forks then the wheels, yep your right its looking like a bike again and i'm with everyone else "i can't wait to see the start up" it has to be live recorded and don't edit any grizzly bits out it has to be as it is weather it starts or not ha ha, i love these videos on a Sunday night i get in have a glass or two of whisky and watch intensively....
Hi Skoots, Might have something different lined up for the front end but nothing set in stone just yet. Loving the idea for the first start, I might even try and do a proper live broadcast straight from the garage at 9pm (bet the neighbours will love me 😂) what could possibly go wrong 🙈
I second Kyle idea, and another brilliant video thumbs up
Cheers Adam, Kyle's idea would make it look more complete, can't wait to fire it up!
Need to get that front end on and rear wheel on make it look like a bike again haha
But looking really good can't wait to here is first start up once all finished
might have to hold fire on the front end but yes would make it look more bike like
Another good video, I think you should get the front end all on and same with the rear, me and my dad are rebuilding his Amber brown bandit just now and that’s the stage we’re at
Cheers Kyle, might have to hold fire on the front end but think I'll get the back wheel in soon
You can put the tank and fairings back on, wed like to see what you’ve gone for, paint wise. Haha
Don't to give too much away but paint wise it hasn't gone to plan, might be one of the last videos it's covered in
Classic motorbikes ahhh well, it’s the beauty of any build isn’t it? If nothing went wrong, we’d all be doing it and it’ll be boring then! Haha
Hope you get her sorted and can’t wait for that video! Keep up the great work!
I can't wait for you to get the ignition side of things sorted and some fuel and start it!!!!
What's the plan for the headers/can...standard or the old system or something fancy??
Last few days have been warm and I haven't been off mine 😎
Great video again thank you.
Just a little jealous, would have loved to have been out on the bike but as you can see needs a couple bits and bobs 😱 I'm going to stick with the Max Torque Cans 4-2-1 full system they made for the bike last year as it made good power on the dyno and I love how it looks on the bike
Might of missed it. What tools did you use to get the exhaust header bolts out? Doing my B6 in the near future and some of them look really tight to get at. Cheers and luv the show
Hi Olaf, I think I showed it in the video with me stripping the bike down but I use a 3/8th allen key socket if that makes any sense
Sticking with the stock shock? Rebuilding the forks with Racetech gold valves or similar?
The stock shock is new from Series 1 and works great for me on the road. I haven't rebuild the forks with any after market parts, but I do fit a USD front end that I adjust to work for me on the road.
Hiya mike here where is the flasher relay on the 600 bandit 1998 faired. i dont have a manual yet. cheers mike
is it on the left hand side cheers again mike
Hi Mike, sorry on the slow reply, I started a new job in November last year and I've been flat out since. The flasher replay is on the left hand side under the rear panel. Ian
Love Bikes all my life here is one for you ? Who is Michael Dunlop riding for this year lol .
Same here Colin wouldn't have it any other way, I'm not sure MD knows might have to ride a paddock bike at this rate!
Shroomy, what Abba stand is that?
Hi Sam, its the skylift really handy bit of kit for moving the bike around when it doesn't have any wheels!
Has anyone got any idea a a vibration buss at 4500 rpm on a bandit 600 , and what it could be ??
Forks so ya can get it rolling
Hi RJ, might have to hold fire on the forks will have to see what happens this week but yes really want to get it rolling again