Traxxas XRT (Duratrax Sixpacks, 20/46T Gearing) EP. 3
HTML-код
- Опубликовано: 12 ноя 2022
- Running a set of Duratrax SixPacks and I installed the 46t spur. Still running the stock 20t pinion
Check me out on Instagram - / jasonperrinrc
Use code JasonPerrinRC10 when shopping at methodrc.net/?ref=2Lbl8vKP and you will receive 10% off your order. The channel will also receive a 5% commission.
Remember to use code "PERRIN" to get $15.00 off at webstore.eliminator-rc.com/ when you spend $100 or more. (some restrictions do apply) 
Развлечения
Im just going to put it out there, but running my rc cars is for me is wholesome. Even watching other enthousiasts driving there rc's...so easy to get lost in a y.t hole
Shrink wrap the wires and connectors to the motor! Other people have been having them come apart while bashing! Great video brother and keep them coming!👍👍🤙😎👽
Thanks for the tire test. A couple sandbags might help stabilize the ramp.
Maybe you could open your own local hobby shop since you don’t have one in your area. You definitely have what it takes to own and operate one!
Garage life rc makes a 3d printed wing mount for the xrt already. Available on his website
There you go doing it for us again!😊 nicely done!
very nice run. The six packs look great 💪🏽💪🏽👍🏼👍🏼
Hi Jason brilliant video that's good you're charging the spur small the better more power bud 👍
That's happened to me before with stock esc's particularly on the Xmaxx and Redcats. I thought it was an esc error due to heat. When you replug it corrects itself. I changed the tires on my Kaiju and now I can't get a full pack thru without it shutting off several times. Traxxas is much better than redcat obviously. I just purchased 3 XRT's..thx for the video.
As far as that front tire thing I noticed the same thing with my car. I didn’t really dig into what it is yet by just looking at it I fallowed it to the servo saver not that it is the problem but I was looking at it just like you.
Where did ya get the 👽 sticker... pretty cool! Awesome run .
I'm thinking of filling that wing mount bumper with silicone when mine comes, might hold it together a bit better
I had my XRT cut out twice like that my first run. Had to unplug and plug back in, I’ve also had the TQI lock up a few times at very short distances.
Yeah it seems to have issues. Going to replace it.
“Every repair cost $100…….I hear you, it’s the same for me (free shipping). Like you, I’m in Canada and order from eliminator and zone hobby.
Nice little bonus when you order from Zone. :)
The six packs sure change the look! 🤩 The wing mount is definitely a problem. Hopefully someone make a better alternative. So you can’t hold down the power button to turn off the ESC 🤔 Weird! Plus seems like LVC is set super high. More reasons to ditch the blue turd 😂😂 Thanks for the videos, it’s been my morning entertainment!
Ya they’re been like that for awhile now, cause to be fair most Traxxas people who buy stuff leave batteries plugged in so they did it so you have to unplug the batteries to shut it off which is pretty smart
I am going to. I may try one of my MMX8S in the truck. Just to see if I notice any more punch. I was really hoping to have to change the esc, motor, etc. Car was so expensive I don't feel like dumping more money in it.
@@JasonPerrinRCVlogs Completely understandable! I ran my K8S and DBXLE stock for a while so I felt like I got my money's worth 👍
Love how these just sail through the air. I have an xmax and outcast 8s so this would round that large scale bashers out well. 😬
I run those same tires on my Erevo 2.0. Bought used with the speed gearing and REALLY need to swap it back to stock. Gets flaming hot. But those tires are great. Some of my favorite.
Cool run with the XRT, I have said before later next year i plan to get another X-Maxx and maybe a few mods like new tires i was thinking about some Hatchet X's. i heard decent things about duratrax tires i had a set of speedtreads shootouts on my slash 4x4 at one point and they were decent. I can't wait to see more vids of the X-Maxx and the XRT.
Awesome video . I just ordered the xrt but I live on madeira island Portugal so If I break anything it takes about 2 months to get parts . I own a bunch of rc cars, drones , planes and helicopters . And they all look brand new . I would never send any rc car on a jump . Although there is tons of videos of people sending It to the moon 🌙 . I enjoy all my RC things but I'm just to concerned about breaking them . Just to give you an idea 💡. I have a kyosho 1/10 Subaru impreza for 25 years and I've never broken anything . And that's the ones that have a mechanical esc . And brushed moter . The only parts that I have ever bought was things that just wear with time like brushes and batteries . I'll probably have my xrt for the next 25 years and never break it .
Nice run.
Sixpacks look good, thanks for the shoutout, yeah that wing bumper sucks!
I don’t get it. It didn’t look like I did anything bad to cause it to break. Oh well, zip tie mod. 😆
That happen to me a few times like it lost signal few seconds it comes back. After those few times it I took the receiver and Transmitter out. And I went and put a Spektrum receiver and bind it to the Dx5c rugged.
I am going to do that soon. I was really hoping to run the traxxas radio, but I don't like it. I will run either a Futaba or Spektrum.
Good morning Sir,
just received a Traxx XRT, with weak links... as you know, here we go ")
Got a max6 on the way , a steel gear servo .
For now has stock motor & traxs ( cheap) gears .
in your pro tip opinion ,
What Gears should I install and ratio ?
Rear Wing support on bay.
Thank you for all your fun & support vids .
Best regards,
lamb
standing by.
So now after some decent runtime what do you think of the duratrax tires on an xrt? I almost ordered some mx43 badlands but i don’t wanna add all that weight to a basically stock xrt. I do have a max6 esc in mine so almost stock.
So if you had to choose, arrma Kraton exb 1/5 or Traxxas xrt? I want to get one of these but not sure which why to go. Please help.
Hey jason.nice vidéo.
Do u think the kc rc motor mount works for the xrt 1100kv motor
Do you ever use a aftermarket transmitter. If you do what one do you tend to gravitate to?
If you want to back flip, just pull the trigger. Your more than high enough, but also it would make it easier to begin with if you actually have that thing some trigger to hit the ramp
Likes the word guys.
I bought a Blue XRT one today. I think that I'm going to put different tires on mine too (duratrax lockup), but I think that I'm going to keep the stock de gearing. I already ordered a 3d printed wing mount for mine off Ebay. Maybe the ESC is hitting Thermal with that gearing?
No, surprisingly the esc only gets warm. The motor gets hotter though.
Very cool
How did u get the duratrax wheels on there
Where can i find that set of tires and rims. I been looking but i can only find them for smaller scale trucks
Where did you get the ramp?
Can you please tell me were you put the mesh pins to run the 46 spure and 20t pinion thanks
What is the best gearing combination for the XRT if I’m running the stock motor with a Max 6 and Badlands?
that flies better than an airplane lol
Where did you get them tires are they belted
Can we get a response on what ramp that is??
en.kc-rc.com/
The reason the xrt feels more snappy than the xmaxx is because they updated the firmware for the xrt to be a lil more punchy the xmaxx still has the old firmware. If you buy that 30 doller thi g that goes in the back of the controller you can update the xmaxx firmware they both use the same exact vxl8s.
Ramp name in the description would be cool.Thanks
I tried just the spur change but it would not connect to the pinion gear what did I do wrong
Hello can u answer my question
Never had any kind of interference with tqi. Other than annoying to tune and not being good for one hand driving I’ve never had any kind of issue 🤷🏼♂️
Great run! You should give the Method RC wheels and tires a try on this beast!
Oh I will. :)
what Ramp Is That?
Where did you get your ramp from ? I am looking to buy one
Here you go.
en.kc-rc.com/
How does it compare up to the Kraton 8s beast that you have? I’m torn in between making a decision on what I want to move forward with. TIA!
Personally I would get a Keaton exb. It’s much more customizable and it’s ridiculously tough.
DONT get a Kraton 8s, these are made of glass, it bends with 1 meter jumps, it is super heavy and fragile. Get the xmaxx, a losi 5t / 30 degree north, or the xrt, or the super baja rey 2.0
Definitely go xrt. I like my xrt so much I just traded off my kraton 8s and sold both my outcast 8s trucks. Gonna add another xrt and xmaxx to the collection after the holidays are over and spring is back. The xrt out handles the kraton stock easily. Is way lighter. Doesn’t need a $200 chassis upgrade immediately out of the box like the arrmas do. Several more positives for the xrt as I’ve owned both but again is still just my personal preference and experiences in the last couple weeks.
Why 20/46 instead of 23/46?
Did you ditch the pin system to adjust gear mess?
Yes I did.
@JasonPerrinRC I yanked mine out last night and being super picky about the mess. Think I'm gonna order a mount to make it easier lol
Where can one acquire that ramp?
Kc rc or ZoneHobbies I recommend ZoneHobbies but the brand in Kc rc
Dominique 😃👍🇹🇫
Garage life rc 3d printed a wing mount sell the on eBay or follow his RUclips.
Garage Life RC makes a 3d printed wing mount that holds up. And looks cool with the way he made the webbing say XTR. Check out his page on RUclips at Garage Life RC
Yup. I already ordered one and I haven't even ran my XRT yet. One crash and that thing breaks.