Alpine MRP-M500 mono block amp dyno

Поделиться
HTML-код
  • Опубликовано: 10 сен 2024

Комментарии • 36

  • @mkp3824
    @mkp3824 8 месяцев назад +4

    I have the predecessor, the mrp m450. I've been using it since 2007, and it's now 2024, and it works like a champ.

  • @joshholden8561
    @joshholden8561 2 года назад +6

    I'm surprised they never made a 1 ohm version but this amp is so popular why mess with such a successful amp series.

  • @joshholden8561
    @joshholden8561 2 года назад +4

    I had this amp and it does seriously more power then rated.

  • @samueljackson2478
    @samueljackson2478 2 года назад +3

    Most underrated Audio company out never get their respect.

  • @redman4076
    @redman4076 2 года назад +7

    Them Alpines tend to do rated and are very reliable amps great video and keepem coming 👍🏽👌🏽✌🏽💯

  • @jnkfishing9274
    @jnkfishing9274 Год назад +2

    Ive got this same amp running 2 12s at 1 ohm daily works fine so far

    • @migascustomsounds3054
      @migascustomsounds3054 Год назад

      I'm about to run 2 old-school Rockford hx2 at 1 ohm.

    • @drewgazmik3275
      @drewgazmik3275 10 месяцев назад +2

      Update on this?

    • @typedrew
      @typedrew 6 месяцев назад

      @@migascustomsounds3054ever do that?

  • @Insertnamehere555
    @Insertnamehere555 2 года назад +4

    was hoping to see someone do a 1 ohm test on one of these. thanks

  • @Chuck_Sanders
    @Chuck_Sanders 2 года назад +1

    Gotta love these full bridge amplifiers.

  • @ra.dawkins1441
    @ra.dawkins1441 3 месяца назад +1

    Thanks

  • @joshholden8561
    @joshholden8561 10 дней назад

    Shoulda tried 1.33 ohm these love that ohm load and do about 1k rms

  • @joshholden8561
    @joshholden8561 2 года назад +1

    U can wire this to a reactive 1 ohm load and it does around 850 u have to use 2 40 amp fuses or they pop.

    • @chrisyangtze8403
      @chrisyangtze8403 2 года назад

      I'm having my Alpine MRP M500 wires to Older Alpine woofer SWR 154D2 (4ohm into 2ohm) 2.9 cube feet port box this little guy playing very loud and solid 🪨 I'm don't think it's playing this loud... it's don't over heat if you know what you're doing 🙈🙉🙊🐝🍯👀💯😹😮😁😄😃👏👏👏👏

    • @joshholden8561
      @joshholden8561 2 года назад +1

      @@chrisyangtze8403 mine doesn't thermal shut down either plays very strong

  • @chrisyangtze8403
    @chrisyangtze8403 2 года назад

    I have one mrp m500 push Older Alpine woofer just one woofer's model number SWR 154D2 in Dodge Charger @2.9 cube feet the little man be able push sooo hard with stock head thanks to New Dodge Charger (2019) I can't change the stupid head unit everything hook up to the head unit 🙈🙉🙊🐝🍯🍯🍯👀💯💯💯💯💯

  • @joshholden8561
    @joshholden8561 2 года назад +1

    Can u redyno using 1.33 ohm it will run that ohm no issue use 40 amp fuses

  • @joshholden8561
    @joshholden8561 2 года назад

    These amps will run 1.33 ohm will suggest running a cooling fan I suggest using 1 30 amp 1 40 or 2 30 amp fuses if planning on runnin below 2 ohm.

  • @joshholden8561
    @joshholden8561 7 месяцев назад

    The new version the a 60 full bridge is a tad more powerful by 25%

  • @joshholden8561
    @joshholden8561 10 месяцев назад +1

    These love 1.33 ohm and u see almost 1k

    • @typedrew
      @typedrew 6 месяцев назад +1

      Oh yeah?

  • @brent338
    @brent338 2 года назад +1

    Is there any reason to go for the newer MRV version over this MRP, or are they pretty much the same?

    • @chrisyangtze8403
      @chrisyangtze8403 2 года назад

      They pretty much the same spec except for the powers wire.. the new one mrv 500 just have bigger wires terminals the old models have small wire terminals (I used 12-14 gauges) are you need just solder bigger wires onto 12-14 gauges wires just heat sinking it's... Best of luck....

    • @brent338
      @brent338 2 года назад +1

      @@chrisyangtze8403 I got the A60m and matching A32F... Looks great sounds good too

    • @joshholden8561
      @joshholden8561 2 года назад

      @@brent338 a 60 m is a superb quaility amp

    • @mkp3824
      @mkp3824 8 месяцев назад

      These amps are pre-2010, so they're pretty old. I have the predecessor, the 450, built in 2006, and it's still running in my truck now, in 2024.

  • @ukokepaoa5536
    @ukokepaoa5536 Год назад

    Amp said FU!! 😆

  • @ukokepaoa5536
    @ukokepaoa5536 Год назад

    I run the newer m500 at 1.3 ohms

  • @joshTheAudioGuy
    @joshTheAudioGuy 11 месяцев назад

    No new videos in a year ? How u been.

    • @bdaudio9395
      @bdaudio9395  11 месяцев назад +1

      Yes unfortunately I’m in the process of moving so I will be set up again in a few months.
      However I have collected over 100 amps in this time to test an make videos.
      Please be patient, I will return soon

    • @joshTheAudioGuy
      @joshTheAudioGuy 11 месяцев назад

      @@bdaudio9395 wow over 100 amps can u name a few so I have something to look forward to ..lol thanks alot

    • @bdaudio9395
      @bdaudio9395  11 месяцев назад +1

      @@joshTheAudioGuy
      Oh god where do I start
      A few hifonics
      PPI
      Power accoustiks
      Soundstream 700s
      Hcca 225r
      Somy xm502x
      Audiobarn 6002
      Bunch of alpines
      Bunch of pioneers
      A few old rockford

    • @joshTheAudioGuy
      @joshTheAudioGuy 11 месяцев назад

      @@bdaudio9395 heck yes !! I can't wait !

  • @AdenNotLoud
    @AdenNotLoud Год назад

    I'd like to see someone try 0.5 with this