How to easily install pedal covers
HTML-код
- Опубликовано: 8 сен 2024
- I got these on the Geek app for $5 w/ shipping. They installed easily on my 95 Mitsubishi Eclipse and look pretty good.
Music by:
Danse Macabre - Isolated Harp by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommon...)
Source: freepd.com/Clas...
Artist: incompetech.com/
I got mine in the mail, no directions, and I was like WTF am I supposed to do with this... found your video and now it all makes sense! Thanks so much! Yeah they look pretty nice, especially for $5
I found that i had to take the covers off my pedals to put these on. I am only using the clutch cover because the gas pedal cover doesnt go on what so ever even tho amazon said it was compatible with my dodge dart
Literally same story here, had no clue what to do. This video came in clutch. Thank you!
Now my friends and family love me more because of this. Thanks man!
Hahahha👍
5 yrs later are they just as cool in 2024 on your new whip?
Just what i needed, ordered the same ones. Looked at the little brackets and thought what the??. Thanks for posting
kritter801 801 I did the same thing 😂
Same here haha
I did too! Thanks to this video I can now do it without question
Same here 😆
Saaaame
Much better than of those videos with guys talking a lot! Good job...
J Ken right
J Ken i hate talkers that take forever to get to it... Its a how to not a reality show
i ordered them , thought long about mounting them , no directions , wanted to shoot myself ! than your vid came along ! i owe you one ! thanx
video really helped. not alot of talking just shows how to do it 👏👏
Not talking at all actually.
I just received mine from Aliexpress. It looks pretty easy for installation, but I wanted a second opinion, so I watched your video. Thanks for help!
Thank you! I opened my pedal covers and was like whaaa so many little bits! And put them to the side. I'll give it a shot now!
Kaitlen Rocha a little threadlock is also helpful...
You did not show how you put the gas pedal..thats the hard part..
You broke yours didnt you?
The gas pedals, you have to angle the clips all four sides. It’s not hard
I just fit mine, and found the gas pedal to be slightly harder to fit, but like the previous comments say - just angle the clamps!
Thanks. Helped me figure out how to install my spec d covers. Kept wondering if the rubber pad was supposed to come off or not. Guess not
That's the way to do it -- less talk, more detail. Well done, I figured it out after I watched your video.
I hope all is well brother, peace for Ukraine 🇺🇦 🙏
I found that if you just put the new covers over a bare metal pedal instead of a rubber pad they will slip.
But sticking some electrical tape on the hardware was able to give me the friction i needed
Superb. Straight to the point and will order one for my Figo
Thanks
Welp mine just took me an hour and some change to put on I guess my pedals weren’t meant to have them on there but I made it work, nice video btw man I was out here sweating my balls off trying to get these damn things to stay on
Fucking instructions in the package are so confusing , this solved it. Top bloke.
Thanks, ordered the exact same brand and was puzzled on how to install them haha. Thumbs up
Thank you that helped me figure out how to install the same ones you've got there on my BRZ. Their instructions really suck. Hopefully yours have stayed on they've never come off right I'm a little nervous to run these cheap things on the car 😂
Make sure they’re tight. I sold the car, so I have no idea how they held up
I got the same ones at Wish. Great Video! Super helpful when the package that was sent to me didn't have any instructions.
Thanks y’all. I installed my blue manual pedals for my Honda Civic. Video was helpful!
I through that the "lip" of the metal piece is supposed to be on the sides of the pedals. I still believe that's the right way. However I will also install like you did.
Thanks for the easy guide!
Thank you very helpful especially when you showed the back side
Now I need a foot pedal camera to show off it to the passenger about this cool stuff
Punya payah saya mau install , skli tgok video ni . Bru sya faham mau psang . Thanks for the video broo .
Bro, okay tak benda ni? Setakat ni masa drive ada tercabut ke apa ke?
@@cheesyminions stkat ni so far so good . Mke sure kena ketatkn la skru tu . Bg btul2 mngcengkam .
*Thank u for sharing my friend*
My advice don't use a screw driver to tighten the screws with these pedals. Use a drill bit and make the holes right into the bare metal of the pedal if you don't they will get loose over time while driving.
Use a lockwasher too. Maybe avoid drilling the pedal.
@@boxybrown4278 what if I just hit the nut on each bolt with a tad bit of super glue?
Surely that will hold tight enough to avoid slip yet be able to break loose with a drill or screwdriver if needed right?
@@RandoManFPV
What if you strip the bolts trying to get it back off?
@@trarath9371 turns out you'll strip em anyway if you buy these cheap sets lol I didn't use any glue or nothing, guess it just got cross threaded or something and stripped.. luckily they are all installed good already lol
It really sucks that my ‘universal’ Pilot pedal pads don’t fit my gas pedal on my 2018 f150.
Cheers mate, got some 2nd hand had a vague idea how they went on. Cheers again bud.
I just tried to mount these my Honda Jazz GD, and to my dismay found the stock accelerator pedal has no grip position for this product - seems to actually be THICKER than what this product is designed for, and slopes enough to stop the product from holding properly.
While it can grip, a couple of sudden stops and the grip is loosened! The only thing I achieved trying to put this on as per instructions is to lose one nut and screw in a place where I have to disassemble a car seat to get at (fell into the place where the seat rail is screwed into the car).
I guess it's not compatible with all automobiles: check if your pedal is the same configuration as the demo first or you end up with wasted metal and rubber/ a gift for someone else (feel the underside of your pedal -. If it's completely smooth and feels like it has a rounded slope - no, this product is probably not for you). Who knows your car manufacturer has design improvements to dissuade you from simple mods like this.
Edit: I now have this hare brained scheme to attempt to use epoxy or a contact adhesive and just use the screws and nuts for holding the metal and rubber part together. That ought to work...
Does anyone accelerator one not clip on one side there’s not enough for the brackets to grip onto??
thats why you glue it to the gas pedal with some construction type adhesive and let sit a few days ,then after a few months of your foot getting stuck and it siting to high you rip it back out and throw it away!
nice thank.
The instructions say something about bending the clips with pliers 🧐🤔
Mine said that too! If it was not for video, I had a new roll of Gorilla tape ready.
These are so flimsy. Just installed mines and not happy with it. They keep moving although i tightened it really good smh.
Same here. Not suitable for long term use.
Thank youuuu !!!
Helped me out a lot thank you.
Mental how difficult this has been for me, still haven't for them on.
Remove old covers first?
THANK YOU FOR POSTING BROTHER !!!!!!!!
Thanks my friend 😊
You are the best bro I just buy pedals like this and you help me thanks a lot
Brilliant video !
Great help! Thank you.
Thx brother ur video help me to solve my installation...
muy buenos te felicito gracias por mostrar la instalacion
Muchas gracias me ayudó a saber cómo van instalados los tornillos con las placas porque en el instructivo debido a que son productos chino trae dibujos poco explicativos, mil gracias
0:32 what is the part called that goes on the screw my set did not come with any
Hi great video. So is it better taking the old rubber pads off and going on. The bare metal pedal. Or going over the old rubber pedals ??? 😅
I just put it over the rubber pedals. Each pedal is different, so you might get it to fit with the rubber or you might need to make some alterations. Thanks for watching.
I tried and tried to do mine but I just dont get what you do with those metal bits.
I keep hearing that these break off while driving and the screws aren't tight enough to stay in place. what's your opinion ?
New Yorks Finest mine have fallen off a few times. I learned to check them every few months. For the price I paid for them, they do the job. I've had better quality pedal covers that didn't fall off... get what ya pay for.
Do you have any recommendations for which pedal covers that don't fall off? Thank you.
Or perhaps using something like Loctite threadlocker will help?
+Kuan Wei Choo I would suggest Sparco or Momo
Uhh...sounds dangerous. Guess I'll stick with OEM pedals @_@
Thanks bro very helpful video 👍😎
Thanks bro, Very helpful
Terbaik bermanfaat semoga terus maju jaya dlm membuat konten up up
The very dififcult part is the pedal you have not shown.why?
Thanks
Thx for the vid, I’ll check out that Geek thing
thanks for the tutorial :) good job
think set ive bought are dud ones due to clips not lining up with screw holes
Great I got those for $8 free shipping! Ebay.
The phantom of the Opera music tho lol
How durable where they after installing before they start to fall off or having issue ?????
thank you this video was very helpful
Buenos días
Has tenido que hacer aujeros a los pedales para poner los rojos
I have the same ones. I thought it’d be easier to hook the top 2 on and then put the screws and brackets on the bottom holes after but I can’t get it in a position where one of the bottom holes isn’t covered at the back by the pedal. Am I doing something wrong or do they just not work with my pedals?
I’d pull it off and try putting all the brackets on. But, your pedal might be too big.
Cheers pal 👍
Thanks bro 🤟
great video was very helpful however i lost one of the metal pieces, do you think it will still hold well if one had 3 screws on it.
Nope, its dangerous to try this
Are these pedals slippy underfoot when you have wet shoes on?
Thank you bro..appreciate it
good sharing bro!
Thanks man!
Aren't you supposed to remove the old rubber pads?
Lake Servers if you have the ones you drill threw the pedal for yeah
Hi, I have the same item, can I use your video to help clients?
For so reason I can’t get the gas pedal on. The pedal is too thick to get it on the pedal. Any suggestions on how to install I have a 2014 Honda Accord.
J J I would get some longer bolts. You might have to modify if your pedal is too thick.
Does it really help or it is only for show?
Nice! We have the same one
μπραβο ρε μαγκα απλα και κατανοητα χωρις ανουσια λογια
THNXS man!!
Thanks paps.
that pedals work on every car models?
Someone here know how to install them if the pedal has no rubber?
Hello guys,is durbility of those oedals good or not?
thankyouu!
I installed these and they all came off in less than a month
Replaced the screws with cable ties and they still came off
This generic sht won’t fit on pedals of pickup trucks
Yeah, might even become a safety hazard at some point
Thanks 😊
Mel I feel like I’ve known you forever
Should I use a socket wrench and also tighten the rear bolts on it?
if you wanted too. depending on the kind you purchased
@@2gEclipsegarage olá. Comprei exatamente igual modelo e cor. Estou achando que não vão encaixar nos pedais do meu Gol/G6😢😢. Montei os parafusos, mad como é noite. Vou deixar para amanhã. Obrigada. Video curto e funcional.
these type covers are dangerous AF !
they first off sit to high with the rubber covers under them , second when they come loose and they will they will flop around and may cause your foot to get stuck or not able to push the other pedal as its sticking on the top or bottom of the other pedal as i comes unbolted. they look some what cool but when you crash remember some one on the "INTERNET" gave you a warning ..
Спасибо. Хоть кто-то нормально показал как их нормально поставить !!!👍
Thank you
OMG ive been putting these on wrong!!! XD
Work on Honda Civic 2001?
Nice👍
that was easy :D thanks
Are they safe? Afraid they'll slip off
They don't fit on my Fiat Punto Sporting.....
The only problem is that they fall off
If it was not for video, I would of been SOL! Plus find someone small to do the mounting. 🇺🇸
Merci beaucoup !
So good, I got them for $11AUD
Got them for 3 usd lol. But i am quite afraid to try them
@@yashvintackoory2893 they actually suck only could get 1 to stay on
@@edg6779 i think its better i dont install them lol and hide them from my brother as he told me they sucks and domt buy them lol. Thanks for the advice.
thanks man