EM1 Honda Civic Si Mugen Pedal Install
HTML-код
- Опубликовано: 11 сен 2024
- I've always wanted these pedals back when I had my EM1 back in the early 2000s, but I never bought them. Now I can finally buy and install these on the Obsessed Garage EM1 Civic Si project. The install was quite easy with me only having to drill holes in the plastic gas pedal.
View All OG Products Here:
www.obsessedga...
For more insight into my life and business become a member of Inside the Hex: www.obsessedga...
Join Our Closed Facebook Group of Like-Minded Obsessed People: / obsessedgarage
Website: www.obsessedgar...
Podcast: obsessedgarage....
Facebook: / obsessedgarage
Instagram: / obsessedgarage
Everything Else I Use That We Don't Have At OG:
www.amazon.com...
Stay tuned for more crazy!
I love this build because of his attention to detail, I had a similar pair on my EK4 Honda Ballade (South African Civic sedan name)
lol
Amg?
The Civic build we all dreamed about while watching fast and the furious years ago. Beautiful car, man.
I had a em1 when I was 20. I built it and turboed it myself. I didn't have a lot of money I was working for my city public works department and had to buy cheaper parts then the actual expensive ones I wanted. I've been searching for a clean em1 to now build since its been 7 years and my knowledge and the technology has changed so much from then to now and I can actually afford all the stuff I want to do then. Unfortunately I haven't been able to source said em1 but this has been an amazing series that has taken me back and made it incredibly enjoyable to watch. I watch tommy and you both and I'm very excited to see this when its done and also enter the giveaway. Good job and keep up the good content!
I'm very glad you documented this video so that Enthusiasts can see how the install really goes on the official Mugen Pedals. Attention to detail is very important.
I had these pedals on my 1999 Black EM1 Si with magnesium wheels and nitro-purge system + a big Precision turbo build with atmospheric BOV; tuned to a "conservative" 400 HP driven hard for 10's of thousands of miles. I have an "H" tattooed on my soul from that experience. Circumstances made me give it up in the last economic downturn in 2008, but I miss it all the time!!
Great pedals Matt. Was that a 5 or 10hp gain?
i did this on my toyota prelude and i got 25 hp on the dyno
@@nepzskiyeah same here me too bro,it's a must!!
Haters gonna hate...
Serious video improvement. Loving the new angles and Broll. Keep up the great work guys.
will be interesting to see where you find new OEM door cards- that's a tough item to find. At least you don't have black ones which would be even harder.
You can find them, going for 600+ each side lol
I looked on majestic passenger is still available at $800 something dollars and drivers side is discontinued 😩
Just started watchin your vids here in uk over the last week. Very nostalgic and entertaining. Bring back so many memories
Thanks for going back to the USDM OG pronunciation of Mugen
i am fanboy of pedal covers...always used to put those pepboys ones on SIIIIIIIIIIIIIIIIIIIIIIIICK
I always wondered who bought that pepboys stuff
@@marquisethomas5611 I did... 20 years ago, in my first car lol. Have owned my Integra 19 years and never did change anything on the pedals. I actually just replaced the worn brake and clutch pedal pads with holes in them, with new rubber OEM pads. Although if I were to change the pedals I would want something else OEM, like the aluminum/rubber S2000 pedals.
Just ordered a gray hex snapback, super excited to see this channel hit 1mil. These videos are top notch. The recent daily uploads are just the icing on the cake.
Thanks man!
I just got some months ago and haven’t put em on yet still hesitating because they are so clean!
Matt, you might want to go back with some thread lock on those screws. I know the last 2 cars that I have had that had aftermarket pedals worked them self loose VERY fast. If you put some med or high strength thred lock on those, your never going to have to do the job again.
Great job Matt! Solid choice.
Hey Matt just wondering if you saw the 2000 civic si with 5k mileage on BaT right now.
Insane price on that one. Clean car though.
Cant believe some chick only put 5k on it.
I forget if its driver and pass door cards or one or the other but they are discontinued and hard rare unlikely to find but then again this guy has unlimited money so im sure someone will sell him a set...
You got good taste brotha!🔥
Good luck finding door cards that aren’t an arm and a leg , can’t find any for my em1 , also check the back side make sure the fiberglass isn’t broken when you buy used ones
I know this isn’t a 911 or m3, but it’s still interesting to watch. I’m hoping once you’re done this that you continue to occasionally do cheaper cars like this. Would love to see a mk4 golf r32 (or even just a mk4 GTI or Jetta vr6) tastefully modded. They’re all giveaway cars anyway.
Awesome ! I’m
About to install mine now
Can't say I'd want these in my EM1, but I like everything stock, so 🤷🏿♂️. Great content though, as always :)
Nice just take the screws out and use a rivet tool & fasteners it will stay there forever.. it's what Honda does..
ctr dead pedal pls.
7:56
You'll need a driver's floor mat with a big heel pad, or separate so that you can glue the pad on. I had new OEM carpets and eventually made holes on the driver's mat with my heels. And good luck if you order floor mats from Lloyd's. Because the ones I have now are from them and the fit on the driver's side isn't very good. I sent a email to them, before the pandemic, a few months and they never replied.
Yea I Lloyd Mats are over priced junk. I got a set for my 05' RSX Type-S, the fit was absolutely horrible, so I put them right back in the box. Tried to return but Lloyd Mats never replied to me either... Such as waste of over $100 smh. I wish Weathertech or any brand made a laser cut mat for my car.. But, it is what it is I guess lol
Nice job and thanks for the video! Really helped me for sure!
I like OG Standard Demo cars but its a bit one sided, bcs its products are used to swap beater parts for new ones and keep/preserve them nice.
On the other hand, OG Products could be used to demonstrate how to recover/revamp old ugly parts, that often are hard/expensive to source. Kind of OG [boutique] vs ChrisFix [restoration].
An OG video less than 10 minutes? This is an outrage!
😆
dammit man quit making this civic cooler than my vette… hehe. glad youre enjoying it! a bout to order an og foam cannon from you, my rip off amazon version only lasted about 12 washes.
You need to apply some thread locking compound on those screws, It'll eventually loosen itself
I love watching these videos..Takes me back. @obsessedgarage When can we start getting tickets for it?
I just used black griptape as you would use for a skateboard
Putting on pedal covers has to be one of the most tedious things to do. I can honestly say that I would rather put coilovers on than put pedal covers on. It is hard to squeeze yourself down in the footwell while trying to get them on. Mugen pedal covers are awesome!
well after watching, kudos to getting them done way better than I ever did lol
the little things make a big difference
Best looking video yet
keep Gunnin !!!
Aki ftw
MOOOOGEN 🐄 BABY LOL LOVE THE PEDALS 🔥🔥🔥
Loving this build Matt. Just wished you'd had an integra back then like I did so I could relive the good times. Also no dead pedal in that kit?
Not this one.
Nice video! On a side note, has anyone ever tried/heard of somebody trying to anodized Mugen pedals before? I've always been curious to see how they would turnout if they were just black, or if the process would even work.
Major acceleration braaaaap! 😂
Honda access has a pedal set that includes the dead pedal..i got lucky and scored a decent set. Hard to find complete. Hope you put oem rain gaurds on this project. 👍
Nice! I have the same set on my EM1. 👍🏾
Beautiful pedal covers.
Pedal covers look great. Does Mugen offer a dead pedal cover? K-Tuned offers nice ones, put one on my FA5 Si, matched stock stainless pedals nicely.
Good job, they look great.
Change your pedal pad stopper while up in there
hey! been looking at these, how's the accelerator feel? it looks like it'd be hella slippy. don't get why they wouldnt do the same texture
when he started the video he said that is should "theoretically" be an easy install....... i was hoping it wasnt LOL
When you drilled through the accelerator pedal, did you remvoe the plastic cover first or leave it on ? Thank you
I left it on.
AFHK Parts allways have OE Civic floor mats in stock!!
I would use blue 242 loctite on the threads to be secure
0:50 Matt like Homothings... Homogeneous 😂
The name is Synergy, the combined value and performance of all be greater than the sum of the separate individual parts.
you won't regret them you will never slip again lol
Bro the plastic does come off man... I was watching ur video to see if I wanted mugen pedals or the honed ones which I decided I to do mugen but yo the plastic comes off the accelerator u can even buy their replacements
Nice, should help with that double clutching! Did the EM1 come with factory leather seats and door card inserts or are those aftermarket?
Dealer option
Do you know how to take the off the 2019 Honda si coupe?
You should list the links to the parts for the civic...
sublte details do make the biggest difference! any plans for the dead pedal?
Yes, I have one coming. It may have to get sacrificed for the kick panel speakers.
Perfection
Has $20,000 worth of professional-grade tools.
Uses the cheap little allen wrench supplied with the pedals.
haha it's all good, whatever gets the job done!
What do y'all think about an AP1 steering wheel instead?
What drill bit ?
What's your thoughts on doing a S2000 gauge cluster conversion? Or do u think the factory si gauges is the way to go?
ScrEwLoOse Ej8 factory si is the way to go looks cleaner
Yeah, I like the OE better.
Odd ball one riced out Brake pedal from the previous owner.
Ad a little thread locker
you sound like a sober shoenice
Rennline Matt
Did he sold the c7??
I did. A month ago.
Naw. Aint feeling it 🤷🏽♂️
should be easy in theory indeed, we all know how that goes haha. It's mewgen according google translate voice :)
This video could have been a lot shorter had u not included all the video of Ur back which helps no one
🗑
First
Now just add a catchphrase. And caps. Don't forget the caps.