would like to thank you very much for taking the time to put this video on " Tension Assembly & Replacement for Sailrite Ultrafeed Sewing Machines ". solved a massive problem for me
Hi thank you very much for this video please I have got brother B755-Mk 3 my tension spring break and I have bought I new one but when I unscrew it the old spring is not coming out I have tried everything please do I need to open the head part of the machine to get the spring out? Thank you please kindly help me I need my sewing machine
Help Please! My entire tension assembly unit comes completely out. Is there a screw that might have gotten loose? I can't seem to see what holds it in place from coming out completely.
Thank you. I have a 1974 New Home Janome 535 machine and many of your videos seem to have the exact same parts and layout. Bobbin area and upper thread tension, needle threading from side, etc.
Hello and thank you for the clear explanations. My machine has a few extra pieces such as a round plate the size of the discs and tiny metal gaskets. The machine is Morse 4300. Are you familiar with these?
The washer ring with the bar in the middle (goes on before the spring), this piece only works on my machine put on the opposite way you're putting it on. I wonder why? I tried excactly what your video shows and my pieces never fit right just because of that one washer before the spring. I had to flip it around opposed to your video and guide book instructions. I'm thinking, it may be a typo in the book or if there or some machines just made differently?
+Sailrite I have the Blue LSZ-1. I';ve tried it several times the way the video and the book shows it, but it doesn't fit right because of the last washer before the spring. So out of curiousity, I've placed that piece the other way around where the round side of the bowl (convex side) is facing out towards my face...and everything fits great and the tension responds correctly; sews fine. I just found this weird, but I'm still happy with the machine. I feel I may need to do a video response to better display this.
+kurinwonderful I think the issue with your tension assembly is this: The tension assembly is pushed too far into the casting of the machine. So... the only way yours works is by turning the cup washer with bar backwards. If you follow this video your issue will be fixed and you can turn the cup washer with bar around correctly: ruclips.net/video/uq-8S1hhkDw/видео.html
Me ayudó bastante me sirvió el video. Lo desarme justo esta parte y me olvide ver como estaba antes de desarmarla. Y con tu video lo logre armar gracias.
These videos are a trove of info when you are having problems. I had a brain fart and loosened the knob instead of tightening it. Well, the whole assembly came apart on me. I kept installing the tension plates incorrectly as it needs two to work, one will get you nowhere fast! LS-1 is back in action!
would like to thank you very much for taking the time to put this video on " Tension Assembly & Replacement for Sailrite Ultrafeed Sewing Machines ". solved a massive problem for me
We are so glad to help!
Looked for TWO HOURS video after video for this tensioner repair!! Arrgghhh!!!
THANKS SOOO Much. This worked for White Sewing Machine Model #944.
Thank you, watched so many videos but after watching yours has brighten my day as my machine works perfect now
I have a LS-1 that needs a new take up spring, where can i get one & do you have a part #?
Thank You Very Much
Muchas gracias, hasta que por fin encontré un vídeo que me explicó claramente como iban esas piezas. Thank so much
Very helpful video. I dk what i would do if i hadnt seen this demo. Thanks. Cheers
Muchas gracias,por fin conseguí el video que tanto busqué
😍
Hi thank you very much for this video please I have got brother B755-Mk 3 my tension spring break and I have bought I new one but when I unscrew it the old spring is not coming out I have tried everything please do I need to open the head part of the machine to get the spring out? Thank you please kindly help me I need my sewing machine
Help Please! My entire tension assembly unit comes completely out. Is there a screw that might have gotten loose? I can't seem to see what holds it in place from coming out completely.
Yes, a screw holds the tension assembly in place. Email us at support@sailrite.com and we will email you instructions via a support case.
This video taught me a lot i have even founded that there is a missing screw
I'm glad to hear that you found the video helpful!
Thank you. I have a 1974 New Home Janome 535 machine and many of your videos seem to have the exact same parts and layout. Bobbin area and upper thread tension, needle threading from side, etc.
Hello and thank you for the clear explanations. My machine has a few extra pieces such as a round plate the size of the discs and tiny metal gaskets. The machine is Morse 4300. Are you familiar with these?
I have not worked with the Morse 4300, sorry. You may need to contact a dealer for help with that brand of sewing machine.
Gracias, me solucionaste la vida
The washer ring with the bar in the middle (goes on before the spring), this piece only works on my machine put on the opposite way you're putting it on. I wonder why? I tried excactly what your video shows and my pieces never fit right just because of that one washer before the spring. I had to flip it around opposed to your video and guide book instructions. I'm thinking, it may be a typo in the book or if there or some machines just made differently?
+kurinwonderful What we show in the video and our guidebook is correct. What model of sewing machine do you own?
+Sailrite I have the Blue LSZ-1. I';ve tried it several times the way the video and the book shows it, but it doesn't fit right because of the last washer before the spring. So out of curiousity, I've placed that piece the other way around where the round side of the bowl (convex side) is facing out towards my face...and everything fits great and the tension responds correctly; sews fine. I just found this weird, but I'm still happy with the machine. I feel I may need to do a video response to better display this.
+kurinwonderful I think the issue with your tension assembly is this: The tension assembly is pushed too far into the casting of the machine. So... the only way yours works is by turning the cup washer with bar backwards. If you follow this video your issue will be fixed and you can turn the cup washer with bar around correctly: ruclips.net/video/uq-8S1hhkDw/видео.html
Me ayudó bastante me sirvió el video. Lo desarme justo esta parte y me olvide ver como estaba antes de desarmarla. Y con tu video lo logre armar gracias.
Muchas gracias!!! Bendiciones abrazó!!!!
merci grace a vous j ai régler. ma machine
Gracias por el vídeo
These videos are a trove of info when you are having problems. I had a brain fart and loosened the knob instead of tightening it. Well, the whole assembly came apart on me. I kept installing the tension plates incorrectly as it needs two to work, one will get you nowhere fast! LS-1 is back in action!
Glad to help!
Good sir thnks you
Thanks..
You're welcome!
Good man
simplemente yo lo moví y poco y mi papá lo terminó sacando y desarmándolo y pa colmo me hecho la culpa xD