Wine Enthusiast 170 Bottle Repair (Part - 1)

Поделиться
HTML-код
  • Опубликовано: 27 окт 2024

Комментарии • 6

  • @jenniferevans2184
    @jenniferevans2184 Год назад

    Do you recall how you got the control board out. Our Wine Enthusiast wine cooler is a little smaller but the control is screwed in and not on a track like the shelves. Trying to figure out how to gain access to the board itself to swap it out.

  • @daviddominguez7210
    @daviddominguez7210 Год назад

    Hi Michael.i have an issue with the board. Someone removed the board and now I got a new one but I'm not sure about I can to reconnect the new board because I don't have the diagram can you please help me to get an idea how to reconnect the new board backe in place. Perhaps a picture of your board connected can help me out. I would like to see the wiring connected with all the color codes. Thank you and please you can't help me out

  • @bruceyoung9585
    @bruceyoung9585 3 года назад

    I Have the same unit. It stopped cooling so I called a refrigerant company to get it working. They discovered the lower inside fan was not operating and the fan cooling the compressor area was not working. With no parts list or instructions on how to fix it, they recommended I get the fans running then they could recharge it. After watching your video I checked the board for burn marks. There were none. I took three of the screws off the lower inside fan. When I turned it on it ran for an instant. The question is how do I get to the fan to check it out or replace it. It think the inside panel comes out but how do you get it out with the control panel in place.

    • @254live
      @254live 3 года назад

      I'm having the same issues did you find anything out?

  • @TTK934
    @TTK934 2 года назад

    We are donating this cooler if you are interested (thermostat is not working)

  • @nathanarredondo8412
    @nathanarredondo8412 3 года назад

    what is the model # for this unit?