Bracing the custom frame - Suzuki Bandit Cafe Racer - ASBO Project
HTML-код
- Опубликовано: 3 окт 2024
- Its been an eventful week in the shop, but I've managed to get the custom frame braced on the Suzuki Bandit Cafe Racer, so it's basically just a bit of welding and a lot of cleaning up left. Then it's onto the mounting hardware.
Ways to help support the channel -
SHARE, COMMENT & SUBSCRIBE
Become a Patreon - / quickbikes
Merchandise - teespring.com/...
FaceBook - / youtube.quick.bikes
Instagram - / _quick_bikes_
PayPal - paypal.me/QuickBikes
Music used on the channel
Bendound is a great resource for royalty free music that you can use on your videos and I'm now using them. Some are free to download whilst others you have to pay for, but they're well worth checking out as you're bound to find what you're looking for. Check out - www.bensound.com/
Funk Cool Groove by MusicToday80
• Video
Title: Funk Cool Groove
Type of music: Funk
Mood: Happy
Download: theartistunion...
Protofunk
• Protofunk - Kevin MacLeod
Author: Kevin MacLeod
Website - incompetech.com/
Royalty Free Link - incompetech.co...
Genre Link - incompetech.co...
Song - "Aces High" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommon...
Retro 80's Funky Extended Version
• Video
Aces High
• Royalty Free Music - A...
• Protofunk - Kevin MacLeod
Author: Kevin MacLeod
Website - incompetech.com/
Royalty Free Link - incompetech.co...
Genre Link - incompetech.co...
Song - "Aces High" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommon...
C Funk
• Royalty Free Music - C...
Author: Kevin MacLeod
Website - incompetech.com/
Royalty Free Link - incompetech.co...
Genre Link - incompetech.co...
Song - "C Funk" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommon...
Gas Pedal
• Gas_Pedal ~ Royalty Fr...
Fork and Spoon
• Royalty Free Music - F...
Author: Kevin MacLeod
Website - incompetech.com/
Royalty Free Link - incompetech.co...
Genre Link - incompetech.co...
Song - "Fork And Spoon" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommon...
Cool Energetic Stylish Funk Background Music For Videos
The Funky Music
Get this music: bit.ly/2MpoTCP
Funkorama by Kevin MacLoed
Music by Kevin MacLeod. Available under the Creative Commons Attribution 3.0 Unported license.
Download link - incompetech.co...
The Jam by Slynk & Mr Stabalina
/ @slynk 
Авто/Мото
![FendiDa Rappa - Clock Dat ft. Shamar Marco [Official Music Video]](http://i.ytimg.com/vi/3NBU8KHdxYY/mqdefault.jpg)
A day late and a dollar short as usual! Progress being made and looking good, you gotta love it when the sum total of the offcuts is minimal, and what is left over can always go in the "come in handy" bin 🤣
Thank you matey. I got lucky with the bends for sure. If I'd have bent them a bit more they wouldn't have worked out to be honest 😁
Looking very nice. Looking forward to seeing it all welded and dressed. Good stuff.
Cheers Ian, that's what I'm doing this week 👍
Been subbed a while but don't really comment much but wow this channel gets better and better. Just got myself a lathe for making spacers and mounts ect ect can't wait to learn on it. I must say your work is quality. 💯👍 p.s got a couple bandits I've been sorting for my dad and now the frames look awful after seeing yours 😭🤣
Welcome.to the party dude and thanks for watching. The lathe is going to rapidly become you favourite tool you own. There's not much you can't make with one and the learning side is really interesting and fun. Feel free to send over some pics of your builds and I'll happily stick them on a video matey 😁
Coming along nicely 👌
Thank you dude 😁 👍
As usual another great video Mr quick 👍👍👍👍
Thank you matey 👍
Looking great mate, top job.
Thank you dude 😁 👍
Awesome mate
Thank you dude 😁
looks good mate, wish I had your skills!
Thank you, I'm not that skilled, just REALLY stubborn 😂🤣😅
Looking fab - 👍😁
Thank you matey 😁👍
Great news on jasmine mate . And that ain't bad going on the bits left over . It's getting there wont be long mate tee hee ..
Thank you matey, it's really rather nice that folks have sent her their good wishes. I wasn't expecting it 😁👍
Frame looks great hope it's not staying purple. As a apprentice I was always told to keep all off cuts till build is finished you never know what you might need ,nice to see someone working the same way
It's an awesome idea.to keep off cuts... I've jumped I'm the scrap vin loads of times and come up trumps 😁👍
The frame.is DEFINITELY not staying purple either... why they did that I'll never know 😂🤣
Frame starting to come together nicely mate. Good workmanship top dollar 👏👏👏
Thank you Stephen, much appreciated 😁👍
The frame is looking awesome, I can see you in the future making more frames the same as it's now your stamp on it then either selling frames or complete bikes you will be loaded in money in no time at all awesome buddy loving it!!!. stay safe and stay strong!!
Gotta prove this one works well before doing that, butbits an option if all goes well I suppose 🤔😁👍
@@QuickBikes you will smash it out of the park I'm sure you've done ya homework on it I'm sure it will be awesome when finished.
Hope so matey 🤣😂
When you did the first side of the Frame , with that Dogleg by the Swingarm Mount , I did have a '' mmmmm '' Moment , it must have been the part of the old frame remaining throwing my Eye , now the other side is done looking good . All that Tube... Think you need a Bigger Engine ....
I know what you mean matey... the purple casts your eye a bit as well. To be fair, there's very little extra tubing and a few less big heavy inserts to the frame, so very little change really I don't think. I should have weighed it though as someone is bound to ask.... 🤣😂
Coming along nicely. Interested to see what compressor you will be using to run your air tools? my little 8bar just doesn`t cut it.
I got a 100L 14cfm SGS unit, basically just replacing like for like 👍
Liked your fancy new graphics, getting the hang of the software then? 😁
Yeah, just trying out some different stuff as the comic book starts mess with some folks. I could be onto something here though, just do a different one each video 🤔
There is a HELL of a lot of work to do on the bike. Think I got a little brave for on my first ever build
It looks like you're off to a good start matey... Looks good to me fella 👍
Loving the 70s porn tune🤣🤣 also the fabrication
Did it especially just for you matey 😂🤣
Awesome job, not sure if you’ve mentioned it already but what’s the digital protractor your using ?
Thank you matey. 😁
Not sure about the protractor... I'll have to have a look tomorrow and let you know if that's OK....
Are cheers mate I appreciate it 👍
www.ebay.co.uk/itm/Digital-0-360-Degree-Protractor-Angle-Finder-Level-Finder-Inclinometer-Magnetic-/325012699601?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Thanks for getting back to me about it, I’m doing a bandit 600 my self and winging it abit 😂 but I’m enjoying it and most of all watching you for inspiration keep up the good work 👍
You're welcome matey, any time. Send me a few pics of your bike and I'll stick it on a future video 😁
I don’t want to be one of them guys. I’m just gonna ask it, though. Why do you want to remove the engine? Or make it easier?
Your frame does look the dog’s danglers, and I am extremely jealous of your work and wish I could do all this! Haha. I’ve learnt loads about fabricating on your channel, brilliant stuff. I would just like to understand why you keep saying “take the engine out”? Haha. Have I missed that video of you saying why etc? I can understand if you’re gonna absolutely thrashed the shit out of it. Or just like to take things apart to clean during winter. I do that… haha
Again, love the videos… this isn’t meant to be a sucky question! 😘
The biggest reason is that I hate the breakaway frame matey.... all that blobby welding which shouldn't really be dressed down as Mr Suzuki can't weld that well is nasty looking and a clean single.piece frame would be ice to look at. To make that do'able, I need to make a frame where the engine can be removed without the breakaway, hence the engine has to be removable... rubbish explanation, but you'll see once it's done.... Hopefully 😂🤣😅
Thanks.for watching Tom and for following along matey 👍
@@QuickBikes don’t get me wrong, I was just interested in knowing. I’m restoring my bike, on my channel. My friends keep asking why? I want to! Haha. I want to make it look brand new and in some ways different to the rest. So, I get you. It looks fantastic! I watch these videos as soon as! Like matts track bike engine and Craig’s gs.
I hope one day, you use the frame jig to make a xr69 rep as people seem to use bandits as a base for one, but don’t really mod the frame! Haha
Tinkering is the fun bit, it takes ages but it's always worth it in the end 😁
@@QuickBikes this looks like it’s definitely going to be worth it!
Where is the Bracing, i only see Welding here.
The cross braces from side to side 🤣😂
CFM, is that cubic feet per metre?😉
Hehehe.... a certain somebody probably would say "Yes.... yes it is matey..." 😂🤣
@@nightster6378 someone’s missed the piss take😂
What brand of holesaw are you using Simon?
I could do with a decent hole saw too matey
I tend to use irwin but always on the lookout for something better
It's just a Clarke.set originally, but I did get another one (Easycut something or other). The Easycut one has lost all its teeth and cuts nothing, some I'm back on the Clarke one. The idea is when I knacker one, I'll replace it in the set with a much better one, so I'll have a look at Irwin next and get a 1.5" cutter 😁
Thanks for the suggestion matey 👍
OK, I'm at 17:39, you're stirring your tea, and I'm shouting at the screen.
Are you *absolutely sure* the real exhaust headers go straight out in a straight line before bending downwards? 'cause the way I'm seeing things, that hozirontal brace is liable to foul the exhausts.
I made some different headers, so yes there is a straight bit of tube before the bend. I'm not really going to know until it's out the jig, engine in so I can fit the real headers in the correct exhaust ports 😁