Mower throttle won't stay up fix
HTML-код
- Опубликовано: 7 мар 2023
- Problem: Loose throttle assembly causing throttle to back down on its own at random times as the nut holding the lever begins to loosen. Gradual power loss at first that worsens to lever immediately backing off once pressure is released. Creates unsafe mowing condition as one hand is forced to stay on the throttle assembly.
Fix: use two 7/16 box/open end wrenches or two adjustable wrenches (or any combination of wrenches that works) to hold the bolt head captive while the nut is tightened back down. This problem may be better solved by purchasing a new nylock nut, but I am lazy and just fix it when it fails again, which is every few months.
How to fix a mower throttle that is loose, mower throttle won't work, mower throttle broken, mower throttle stuck, mower throttle broke, mower throttle doesn't work, mower throttle won't go up, mower throttle won't stay up, mower throttle keeps moving on its own, mower throttle comes down on its own, mower throttle fix, mower throttle easy fix, mower throttle cheap fix, mower fix free, mower fix cheap, mower fix easy, how to fix mower, how to fix broken mower, broken mower fix
Copper Creek Cuts is a lawn care and landscaping business in Florida with a goal to entertain and educate.
Contact me: coppercreekcuts@gmail.com
The products I use: www.amazon.com/shop/coppercre... Развлечения
Could also use blue threadlock to prevent it from loosening from the vibrations to the nut.
I don’t think it’s from vibration I think it’s from the plastic shims wearing out and now it is metal on metal instead of metal on plastic factory not like the overseas ones in most cases
Be careful forcing the black plastic part on that lever. Had the same issue on a mower. Under too much pressure the plastic part broke and the iron lever underneath was razor sharp. It sliced my hand open, blood everywhere. Just a heads up.
Thanks for the tip. It certainly has solved the problem for the time being on my Bobcat. Had spent a lot of time trying to solve it from the engine end!!
Awesome helped me fix my 4100 Ventrac
Husqvarna Z 248, Thanks man, pretty easy fix!
Hi this is Brad with Copper Creek Cuts, a lawn care company in Northeast Florida
If throttle stays up more than 12 hours seek medical attention. 🤷🏼♂️
I thought it was 4 hours?
You couldn't resist .....
Good info.
I have one of those self choking and throttling push mowers. It was running slowly, so I replaced the throttle spring. Then it stretched that one out and did the same thing in minutes.
Hey Brad, I have the Ferris FW 15 with the exact same issue, BUT the throttle assembly does not have any bolt that can be tightened. Have to replace the who assembly unfortunately. Good video though..
Wright Stander X 52" Thanks
Can you put a locking washer under the nut to prevent the vibrations from loosening it?
This is literally my mower your a life saver
It’s funny that it’s has a lock nut but keeps backing off. You could always add threadlocker to stop it from moving or use a locknut that has the crushed end that uses the deformed metal to hold onto the bolt instead of that plastic.
Throttle Linkage not assembled right. Trying to get answers. Cub cadet o°ride on
Scag V-Ride (first Gen) having the issue, but there is no nut to tighten 🤔
Looks like nyloc nut. Probably needs replaced if it keeps coming lose. Even better fix would be a second jamb nut, so it would be impossible to come lose.
😅
Z254F Husqvarna zero turn.
Stiffer? My wife doesn't have a brand or a model number...........
Do you wanna see it
I am not a gentleman " that's what she said "
🤭 😇 never mind...🤬 😈 heh heh heh