DIY CO2 ZRDR Generator Kit (unboxing and installing tutorial)

WYIN ZRDR Reactive CO2 Generator Kit ( DIY citric acid and baking soda) unboxing and installing tutorial
Follow me on
Instagram: / greenshadesaqua
Facebook: / greenshadesaqua
Dawn by Sappheiros
/ sappheirosmusic
Music provided by www.plugnplaymusic.net
If you like the video, please like, comment and subscribe.
Thank you
#aquascape #aquarium #diy #diyco2 #diyco2system #diyco2generator #co2

[@polysheep]

Just some advice for people who are looking to get this system. Do not pour the water directly into the mixture of baking soda and citric acid. If you read the instructions that come with the product, you will find that the manufacturer advises you to tilt the bottle at 45 degrees and pour the water in so that it flows down via the bottle wall into the mixture. If you pour directly down, you will likely experience a fast reaction causing liquid to spill out of the bottle before you can screw on the regulator.
Second, do over-tighten the regulator. There is no need to do it like in this video. Screwing the regulator too tight may break the rubber o-ring that is above the screw threads and cause a leak instead.

[@five2112]

At 3:44, at the bottom of the silver tube is a white cap - I believe you put some cotton wool inside and screwed the cap on - I don't appear to have these in my kit.

[@MissBuilderBear]

Me too. I have seen a couple of variations to what u r asking about & it is simply a method of ensuring no moisture builds up inside tank n reg etc...... est thing I’ve seen so far r the sachets of clear balls u get inside certain products . The lil bag of balls that get thrown in the bin. Simply empty a couple of sachets of balls into that sealed section. Replace every few months I guess... Can u answer my dilemma? My kit also doesn’t have a safety release valve so I refuse to begin until I know where to get one or where my one ended up...... I’m awaiting a response fronds from Amazon currently.

[@justinschmitt5888]

How do you clean out the residue?

[@alantooth48]

Excellent video thank you for making this video. I have one but I am wondering what the top knob controls?

[@AllanCox7]

How much better is this DIY generator compared to your old one (the one you took the solenoid from)?

[@greenshades7737]

With the Old Kit, it was necessary to count the correct supply of co2 bubbles every morning because the pressure was unstable. With the new one the same as with professional equipment you adjusted once and forgot up to three months for a 60P tank 😉(2L double kit)

[@kamranasif2004]

How many days you get the CO2 for the amount of baking soda and citric acid you added? It will be annoying if you have to refill every few days?

[@LukaszSarapata]

They say that at 2 bubbles/second it soud last for 120days

[@MissBuilderBear]

Can u answer my dilemma? My kit also doesn’t have a safety release valve so I refuse to begin until I know where to get one or where my one ended up...... I’m await

[@fandyshadenio8022]

400g soda+baking soda size 2L how many weeks can it last? if the size is 200g baking soda & citron lasts up to 40 days

[@Everytimeifail]

After amount of usage are you still satisfied with the product? Thank you.

[@greenshades7737]

Yes I am still very happy I even bought another to new Aquascape project 😊😀

[@erictan3022]

how long it's presure come to 10KG?

[@greenshades7737]

Max 5 min. 😉

[@Kevnelson1975]

Hi Mate, recently bought one of these but I have gas leaking from the on/off nozzle. Any ideas? Cheers

[@swamudripa]

I purchased the same but they had not given me the regulator setup. When I asked them about regulator they are silent. Now tell me regulator is included with this cylinder or i have to buy separately.
And from where i can get this regulator setup or any link. I am from India & tganks in advance.

[@greenshades7737]

There are many sellers online who only sell regulators to this kit

[@prashanthkumar3834]

Hi Sandip. Can you share me the link from where you bought the CO2 kit

[@swamudripa]

@@prashanthkumar3834, through Eassymall app.

[@prashanthkumar3834]

@@swamudripa I heard that's a shady site. They don't ship the products and cheat us of the money

[@swamudripa]

@@prashanthkumar3834, it's up to you. you asked me that's why i shared but I received it in sound condition. Ok

[@emanon888]

Are you putting double the amount of ingredients it tells you to put in ..

[@ahmadlacerna6556]

Hi.. Is this good for yeast and sugar mixture ?

[@comment.highlighted]

I have this CO2 kit and would not recommend using yeast & sugar.

[@manolingz]

How do I remove the residue at bottom of the tank after each reaction cycle?

[@comment.highlighted]

I recommend using hot water to dissolve the residue. It worked for me 🙂

[@ol3govich515]

Where i can buy this?

[@greenshades7737]

I bought on Ali express 😉

[@MrGreen-nu8og]

why did you double the amount of ingredients?

[@ProGamer-nm1ey]

so it can blow up or leak, i was also surprised when he did that