ODL Brisa retractable screen door installation
HTML-код
- Опубликовано: 11 июн 2016
- Here is a basic installation video of the screen door installation. It took me about 45mins, give or take to install the door. I still need to fill the gap at the top. I will cut a piece of board to fill this as the gap was just slightly too wide for silicone. ***Please note that my door bell is only 24VAC, yours maybe a higher voltage, check your panel before doing any modifications to the bell***.
Хобби
Thank you for putting this video up. I had to watch yours and another guys channel to get mine up today. I was working in a confined space so it was a bit confusing at times. But I appreciate your time on posting this video up.
Thank you
glad it was of some help.
Thank you so much for this. So helpful! Great job!
I really appreciate you doing this buddy.
I understand what you are saying, but there are other here that watch videos to do their own home repair, so it pays to actually show them, not after you do it because you edited that part out. I watched the video because I was helping a person out, the door that she purchased was was a 78” and it did not butt up because she needed the 81” one. I thought the 78 extended 1” on both sides. I wasn’t sure so I wanted the video. I’m glad you got the right door. And it was an easy installation. But people sometimes get the wrong part. I know how to do repairs and home projects. But guess what old buddy....the wrong door was bought and again it was a waste of time just like reading your comment. I guess you never had an issue huh....master repairman!...
luis, i do these videos for fun. I am not a 'handyman' or a professional videographer. if my video was no help to you move on to another. there are lots of videos on here. that is all i do, i don't sit there and complain about the free info...
brian santoro ok...but after you make another video...watch it and see if it makes sense to you...or like you said...move on to something you know how to do...I just wanted to learn how to fix the problem...Sorry if I hurt your feelings...take it as constructive criticism...I learn too by those words..
@@luisgonzales7600 you sound like a real douche. Sorry, just being honest.
Good job, thanks for the video
Looking to get the double-door version.
Just installed this brand screen double door and it don't take 30 f'n minutes and you better have 2 people. The f'n. instructions are missing some key instructions. Gotta wing it if your savvy. F'n nightmare to say the least, But got it done. 😂🤣...
Screwing deck boards and pounding on the frame with first hammer not very helpful. Did you level the screen door before screws?
Love your wind chime
On a scale of 1 to 10.. how hard was that to install? I need a screen for my front door.
very easy to do. if you have basic tools in your tool box, you should find this easy to do.
@@dakotamar45acp would I need a drill?
no you can use a screw driver to put the screws in.
How much did you pay for this, it's now out of stock in hd and Lowe's..
Could not tell you. Mostly likely got it at HD or lowes
Can I use this to lock an entry to prevent cats from going into my living room
i would say no, mine was able to get out by pushing the bottom of the screen out of the track and going under it.
how do you pop off the track to reverse the door?
if you want it to open from right to left you would just turn it upside down and mount it opposite to what I did
.
Does it have lock from the inside?
I am pretty sure it does. they are not much of a lock though. I don't think it would keep out a dishonest person besides the fact that the screen is easy to push through anyway. my cat is smart enough to get out through the bottom.
You didn't drill in your door sill screws???
been a while, i don't think there was any sill screws. on a side note, the door still works very well.
@@dakotamar45acp what were the small screws for?
30 min. 🤣🤣🤣
Took me like 2 hours, and im a machinist. If you add the 2 trips to Home depot. 5 hours.
You're kidding, right? Takes me about 30-60 minutes, depending on each situation/surroundings of door.
Will the door fit over my existing screen door sill/track?
You have to be able to put the sill for this one down. So it would have to be flat enough for that. My guess would be to remove the one that is there
can the height be cut down 1 inch ?
not likely
so how is the screen now?
still works good. we get a pretty good cross brease thru our house with it and the screen stays in the track. opens and closes better than our phantom screen on the front. I like the way it doesn't fly open when people not used to it open it.
thanks for the reply
how s it holding up after a year?
Carl V still working good.
Do you know if the screen is replaceable or do you need to buy the the whole package again?
You can replace the screens
@@terrycain3843 do you know, that you need to order it specifically from this company or can you just buy simple screen material from the store? Thank you!
Somebody please lmk how to get the tracks apart since I forgot to put the sill plate on first!🤔😔🙄🤬🤬🤬🤬
i believe you can lightly tap them back out.
skipped from down on deck to install into opening. Why ???
the only thing you missed was me picking it up off the deck and placing it in the door frame...
@@dakotamar45acp I was wanting to see it placed into the door frame myself.
at 8:55.......dats real
you went mute at the end, I had to read your if you were looking at the camera, which you did not.
Julio Torres I am not sure what u missed but I was just checking how well it stayed in the screen track at the end. I also stated that i didnt have to cut the door parts as it fit in my opening without having to do that.
Would have been nice if you gave someone 20 bucks to hold the recorder. so we can see everything you're doing.🙄🍷
You are more than welcome to send me cash so I can up my game.
@@dakotamar45acp No didn't mean to offensive. Thanks for the video😂🍷
so it looks like you skipped adding the plate at the bottom and mounting the screen door to the door frame. a couple inportant steps on the video
really!!! with those clunking chimes??!!??
if you want to upgrade to the paid version I can do it without the chimes.... :)
Show us when your putting the frame up to position, not after the fact...and you show us fixing other task...waste of my time...
wasn't hard bud, i lifted it off the deck and placed it in the frame. easy peasy. it fit perfectly into my frame. if you can't figure that part out, hire someone to do the install for you...
brian santoro
Read my comment below
Luis, clearly you are a useless twat if you can't figure that part out. Should he have shown you how to insert a driver bit into the end of a screw as well? Maybe how to charge a battery for a drill before operation?