How to Build a Guitar Stand - That Holds 10 Guitars
HTML-код
- Опубликовано: 19 фев 2017
- My brother asked me to make a guitar stand for all 10 of his guitars. It holds 8 electric guitars and 2 acoustic guitars. It is constructed of 3/4 oak veneer plywood that has been edge banded and stained with chestnut colouring. It uses pocket hole construction and 1/4 sticky back foam for the bumper padding.
Visit my website (listed below) for a free set of plans.
Buy a T-shirt to support the channel:
teespring.com/stores/diy-builds
Visit my website for free plans and see viewer builds:
diybuilds.ca
Follow me on Instagram:
/ diybuilds
Follow me on Facebook:
/ diybuilds
Support DIY Builds on Patreon:
/ diybuilds
#DIYBuilds
#Woodworking
#DIY 
Хобби
Follow up video fixing the adheasive strips here:
ruclips.net/video/JuXNEopRlXo/видео.html
Really didn't want to route out the space for the guitar necks. Using the drill then cutting the out the neck entrance - Brilliant. Thanks for the tip.
Great job, Brad!
+SpectreSoundStudios Thanks, Glenn!
maybe you could sell these online Glenn!
if i had the money i would buy this
Ok sell me one.
How much?
Actually I need two.
I better go count my guitars again, two should be good.
You gave me a great idea! I’ve been wanting to build something and I couldn’t think of it, but this exactly what I need! Thank you!
very nice my father-in-law would love that
This is very well thought and designed!!! Great job!
thank you for this video: great info and awesome editing. I appreciate the time you took getting the editing right and saving everyone time.
That is awesome. I am going to have to figure out something similar for my odd shapes like the V's and the Mockingbirds
It looks gorgeous! Loved that stain color!
Great job! Can't wait to try it myself!
all seriousness though, really cool and seriously well made and looks great. I'd love to give this a try.
Kool! Now all I have to do is buy another nine guitars!
This is exactly what I need
So multi talented!
Excellent stand for guitar !
Hell ya Steel Panther! Great looking stand man.
Great job! I think I need to make myself one of those!
That was a good build. Thanks.
Watching people casually whip out these awesome looking projects and then looking at my attempts makes me feel like that spongebob meme where patrick nails a board to his head lol
Gorgeous!
Nice work!!!! Would love to see ya build a road case for an amp
Brother that is sweet. Great idea.
Thanks for the free plans. I just finished building my rack using your measurements. The only tools I used was a circular saw, drill press, jigsaw, and a drill. I used cedar fence pickets, so it's not exactly like what you built. Hopefully with some stain and poly it will hold up for a long time.
Just to throw this out here, I used EVA/craft foam for the padding. It was really easy to work with and hopefully it holds up.
Nice inspirational for what I'm going to make with pallets.
... for those about to build something with your woodworking skills, we salute you (just rolls off the tongue, yes?)! 🤘 Nice work, sir!
+Jeffrey Moon lol thanks
Liking the pocket holes :)
Perfect!!!
I made one of these about a year ago. Only held 5 guitars. Then I made one about 6 months ago that holds 7 electric guitars, cuz I bought 2 more guitars. Did mine pretty much the same way you did, except I used Acacia hardwood floor leftovers. Milled it down to square stock and went from there. Nice finished product. Great video btw!
+Donald Shores thanks
awesome job
Very nice man
Good build, man. A guitar rack is next on my "To Build" list, and then here your video pops up in my recommended views, too convenient! I'll probably do a 6 rather than 10, that way I wont feel like I need to buy 4 more guitars XD
Super nice!!!
7:00 thumbs up for the sandals/flip flops lol
LOL, I was thinking the same thing
I'm planning on building a table for my studio soon. Those pocket hole jigs are a seriously great concept, was lost on how I'd put everything together before i saw those
+ccandrew111 yes they are nice. make sure to check out my recording studio desk.
DIY Builds yes, I have seen the vid for glenn's desk. I'd like to thank you for giving me a clear direction I can head in for my desk
Darn, I wish I had tools like that, and how to use them. Cheers!!🙂
Great work man!
+Oséias Silva thanks
Congrats Bro! You área súper carpenter!
Are sorry spelling corrector mistake!🤷♂️
Nice ! All these videos of people using power tools in fast motion still make me nervous though! Lol
Awesome!☺🎸🎶
Nice build!
And Free Plans too... Excellent!
I know "most people" wouldn't need a video to conceive this plan, but for me I'm happy to see the build and also get the cut list/free plans. Saves me a bunch of time.
Thanks for sharing! ;)
hey couldn't find the Plan on the website. If it's still there, can someone please share its link with me?
Under plans then project plans
@@DIYBuilds Ok thanks 😊
this was so sick..im definitely gonna try one soon! tho mine won't be as nice! lol
Nice job.
Nice!!!
Most likely anyone with all those tools wouldn't need a DIY video. Nonetheless, I like the finished product.
PDBO Ya my videos are for inspiration mostly. But you could easily make this project with just a circular saw a jig saw and a drill. Also I offer free plans ;)
@@DIYBuilds I have only a Dremel 4000, what do you think?
Good job.
GOOD JOB
your background music sounds cool \m/
good woork! lets Rock dude!
thank you metal man \m/
Awesome
Excellent!!!! Nice looking stand but I'm afraid I'll have to have 2 of them. Glad to see you put the foam protection over the wood. Can't tell you how many clowns 🤡 I've seen who skip that part or do a shoddy job and it damages the finish.
Barney Fike Might have done it a bit better using felt/cotton batting for the application instead of foam as, foam tends to break down over time,and takes a toll on the finish where contact in any direct sense is made. Felt or cloth batting may rub a bit over time, but rarely eats the finish off the body or neck.
thanks.... that's the one i need :)
Nice Nice 👏🏼👏🏼👏🏼
Nice build.
+Jerry's This and That thanks
Nice, ive just built the stand. Now I need to get 10 guitars
Awesome email me a picture if you want and ill post on my website.
Challenge accepted!
Definitely know my next weekend protect.
That Green Ranger...
and now we know the connection to Glenn also haha
+Koedix yup lol
Should maybe point out that the bulk of rubber foams will leach out chemicals over time which will damage a nitrocellulose finish, so if you have any guitars finished that way, you're going to need to put something over the rubber to stop that.
I think by the time that happens he would have upgraded to something better
Hate on Gibson all you like, but you don't get nitro finishes on cheap guitars.
Derpimus Maximus who talked about Gibson?? Also I don't know if you ever bothered with Luthiering but nitro is nothing to brag about.
Derpimus Maximus Nitro is the worst finish you can get on an electric guitar.
I thought he used felt strips, not foam.
Just built 2 of these and had to modify it a bit to hold my rhodes v and my bc rich warlock
Super!
1:32 stooop, you are hurting it!
Awesome job Brad !! i want one ? how much cause i am a touring musician and you do great work my friend and i can get you a lot of work buddy....
Name 6:20 product o link to buy?
Awesome video. I will try to build this. Thanks for inspiration.
👏👏👏
What kind of padding did you use? Will it leech or stain a nitro finish guitar?
Like for the rolling pencil :D
So I'm planning on building one of these to donate to our local junior college's recording studio. Did you actually cut the bottom horizontals the guitars sit on at the corresponding angle in the plans, so their bottom faces sit parallel to the ground? Do you know what the distance the bottom of the horizontals is from the bottom of the sides? Thanks! Great plans.
How do you determined the angle of the bottom pieces?
Fucking rad, thanks for the video!
Thanks for the inspiration! Is there a slight tilt-back to the guitars? It’s hard to tell if they are standing straight up or leaned toward the back of the rack.
Leaning back
I saw this vid when you first posted it and just revisited it today because I need to make one of these for myself. Great video. Do you have plans for this build? And by the way, tell your brother nobody needs 7 strats. How about a SG, V, LP, or something? lol
+King Beard ya he likes strats i guess lol. Ya plans on diybuilds.ca
What is the length between each of the holding grooves?
What is the name of the black self-adhesive tape that you are using in the holder??
Very cool! Could you plis tell us What are the measures and the angles with which you put the 2 woods that hold the guitars in the bottom?
I have updated the plans on my website to show these measurements.
Omg is that game over by final stage?
What is that tape that your ironing onto the edges of the ply wood?
And now I just need 8 more guitars
you´re my heroe
What is that end seal thing that you iron on at 2:30?
Where'd you get that edge trimmer?
hola, donde compraste las pantuflas?
what if you buy another guitar ? :) thanks, nice work!
Is that Lady of Pain by Final Stage in the background?
+Samir Hodzic yes sir. My bros band.
table saw blade super high. zero safety guard. I feel like I'm back in my dads shop in the 70's / 80's.. Nice Build!
Cool build! May I ask the measurements between the slots where the neck rests? Thank you!
Wait! I saw it on your website already. Thank you!
Ace.
The guy knows his stuff great job and video thanks
this is more of a "watch me do it" video than "how to"
Sky Marbles not if you combine the video with the free plans I offer on my website
DIY Builds you better have dimensions there! Cuz if u build it on my own its gonna hold 1 and a half guitar
DIY Builds what is your website address?
@@robertbambino7949 check the description...
Would you consider making one of these and shipping it to me so all I have to do is assemble it . I want it for 6 guitars in cases , so the little openings on the top portion would need to be bigger .
Amazing project!
Just a question, will this hold V-shaped guitars?
Probably not.
I was happy that I could do it at my home l, then I remembered I just have one guitar....
Whatever ! Build one for four guitars and work your way on up man
You'll get there
Whatever ! Lol I was just thinking great excuse to get a couple more!
I never understanded why someone wants to have more guitars. I mean I have 2, but one is electric, the second is acoustic. I had another acoustic , when I was beginning , but sold it. I have another electric guitar, but I can't sell it, yet no one wanted to buy it, so I just have it, but I don't use it
Paprad Zidan different guitars have different tone and quality
6:42 what's that black stuff called?
Can you share this backing Track?
I built a 5 guitar rack from the plans out of some oak and cherry we had lying around the shop and it turned out beautifully! I was hoping you could tell me what you used for the padding on it? I went to a few different stores but couldn’t find anything suitable. Thanks!
Watch my follow up video where i change the pafding to felt and some kind of soft material over top of felt padding.
DIY Builds will do, thanks
Please send me a photo for my website once your done id love to see it.
Very Cool, i really do not have all the tools to make this though
Table saw, jig saw and drill is all you really need.
I will try and borrow a table saw, i have a circular saw, i wonder if i could convert it some how
Awesome build! Inspired me! What do you use for the rubber parts to support the necks and base?
No idea, but it looks like a self adhesive foam door gasket, or seal, to help keep weather out of the house in winter. Foam weather stripping. You can use foam pipe insulation if you can't find the weatherstrip.
Ya that stuff failed and I made a follow up video fixing it by adding padding a cloth stapled on everywhere if you want to have that a watch.
Good idea for shotguns and rifles stand 👍🏽
Do you have the measurements of all those pieces in plans somewhere? I enjoyed the video. Got a lot of good ideas.
My website under plans then project plans and scroll down until you find it
Thank you!!!
He's got the eye of the panther
I only own a screwdriver so am fucked
hah. that one got me.
Very Good.
I would like to know measures??
Plans on my website
A case for guitar. Can you make ?