You can finish the rest on a hot day. Let the dent set exposed to the sun then use a can of air duster and hold upside down letting frozen liquid out onto the dent. The dented area will shrink up pulling metal flat. I've used this method several times.
@@HomeStatOfficialIf you flip a can of air duster, like they use in offices to clean keyboards, upsidedown the liquid will start to come out really really cold. So I'm guessing if you spray that frozen liquid on a hot panel it will have some sort of reaction forcing it to pop the dent out. 🤷♂️
amazing job ... sir just want to know how i can use the glue ? i mean is the gun heating up the glue before i can apply to the dent ? cause someone did small dent on my fender about an inch .
Sounds like perhaps it wasn't a bird at all, you say after you cleaned up the shit there was a dent left behind? Perhaps you drove thru the ghetto and someone tweaked out a shit off a fire escape and when it traveled down a few flights left a dent.
They need to invent a variable magnet with different sized bases that will pull a small dent flush and even with the base. A one-time pull. Comprende? Lo entiendes? Do you get my drift?
Looks a good tool, but I'd be really concious of creating extra damages everytime you drop the little puller onto the car's paint work - I cringed everytime it happened and there seems to be a long scratch next to the dint after the third attempt - ouch ! But thanks for sharing.
My mom asked me to pull the dents from Hail out of her car as she had bought a kit from amazon...no problem or so I thought....went over counted around 90 dents watched this video then told her to call her insurance...this would take days to complete, lol....
Same question here. Have a small dent similar to above with a paint chip. Want to pull out dent before touching up. Afraid the glue may remove additional paint.
@@lwhittyas a pdr beginner, I don’t recommend glue pulling it. If the paint of the car isn’t a factory painted then glue pulling the dent will cause the paint to pull off as well
Some people just like the satisfaction of doing something with their own hands, being independent, and having the ability of doing it over and over. Saving money is one side of it, but there are more sides to most DIYers.
If you're doing this in the cold, it's a good idea to use a heat gun (or hairdrier) to heat the paint up so it will not chip. Additionally, alcohol should be used to get rid of the glue, it comes right off. I'll be trying this on my new (to me) BMW which comes with dents on the hood "pre-installed". God help me.
I feel that you are just a beginner at pdr.... Reason i say this is BECAUSE YOUR NOT EVEN USING YOUR LINEBORD,that is literally the first thing ANY pdr tech learns how to use... you literally have that light on for no reason
He literally is moron! He said he bought a kit and has done a few dent before! He didn’t go to school. Give helpful advice instead of being a moronic critic
You're supposed to clean off the excess glue after every single pull....man,this guy has absolutely NO IDEA what he is doing, there are zero reasons to take advice from this beginner
@Nolan320 i am actually an autobody specialist with 5 years experience,nevertheless it does not take a "PDR pro" to have tips and tricks to protect paint and clear coat when working outside of your trained profession.. On another note..this guy is using the line board only because he thinks it makes him look like a true pro lmao...he isnt even using the effin thing,he just has it on;reflecting atleast 2.5 inches away from the dent he is working on...A LINE BOARD IS NOT FOR LOOKS,IT IS AN ACTUAL TOOL WHICH UTILIZES ITS REFLECTION TO MAKE THE TARGET DENT MORE VISIBLE AND EASY TO ANALYZE...ALSO the line board helps you keep track of the tip of your push rod as you are pushing from the backside of the dent...other than getting lucky,how else can you assure that you are pushing on the exact part of the dent you are aiming for?... I promise you this,and this statement is valid for EVERY SINGLE PROFFESSION YOU CAN THINK OF...if you dont know how to use your tools effectively and efficiently,YOU ARE NOT A "PRO".... Im not full of myself,i know im not a "PDR PRO"....but i can use my tools with confidence and ALWAYS stand by my work.
looks like he did a pretty good job to me . the dent is gone. but yes cleaning the area before more pulls would be good practice. but he knows what hes doing by the way he pulled it smalk bits at a time.
@jesseurlacher5773 cleaning the area has little to do with the amount of dance that is left over when he is done, not cleaning the surface will make it more difficult for the glue to adhere, but the absolute most important thing to do is to clean the surface because that is the most effective way you can lower chances of scratching the paint we're chipping the paint. Cleaning the surface beforehand isn't as much of a tip as it is proper procedure for any kind of body work...weather your sanding,pullin dents,or applying vinyl wrap you ALWAYS clean the surface beforehand..
Bbbahahahahahhahahahahahab " it's getting harder for me to see the dent so I'm going to put some marks around here" what do you think the line board is even 4?... why is a beginner trying to give advice
Bought it. Got a restoration project going on. Hail hits, and some other hits. I got patience and time. Thanks.
You can finish the rest on a hot day. Let the dent set exposed to the sun then use a can of air duster and hold upside down letting frozen liquid out onto the dent. The dented area will shrink up pulling metal flat. I've used this method several times.
i’m interested😂 how and what is supposed to be frozen? i’m genuinely wondering as i just bought a truck and need to do some work
@@HomeStatOfficialIf you flip a can of air duster, like they use in offices to clean keyboards, upsidedown the liquid will start to come out really really cold. So I'm guessing if you spray that frozen liquid on a hot panel it will have some sort of reaction forcing it to pop the dent out. 🤷♂️
terrific presentation, helped a lot, thanks!
Thanks for the video. Really excellent job for a home repair. I have a few dents to take care of and will use this kit.
Never remove the glue with your finger nail,a cleaner way is to use isopropyl alcohol and no scratches.
Where can I get that work light? It is really impressive. So is your skill. Thanks
Looked pretty good.I don’t understand how the plastic punch tool for hammering in a bump doesn’t put small dents back in ?
Great tutorial and setting of limits there! Good Work!👍
Use isopropyl alcohol to clean the glue off
This is perfect I think I want this for the tiny dent above my wheel arch. Do you have the link
amazing job ... sir just want to know how i can use the glue ? i mean is the gun heating up the glue before i can apply to the dent ?
cause someone did small dent on my fender about an inch .
Good work, that looks damn good
Wow that came out good.
can you tell me what kit you purchased
I MUST ORDER THIS . I dont know if the bird that took a shit on my car eat stones because after I washed the shit of , it left a nast dent.
Sounds like perhaps it wasn't a bird at all, you say after you cleaned up the shit there was a dent left behind? Perhaps you drove thru the ghetto and someone tweaked out a shit off a fire escape and when it traveled down a few flights left a dent.
I ahve several glues. Some came with teh kit some I ordered extra. Looks like your using the general glue from the kit.
Is the door aluminium made or iron made? Will it be harder for aluminium made doors? Thx
Wow impressive! Thank you
effective on corners? Like the rear part?
They need to invent a variable magnet with different sized bases that will pull a small dent flush and even with the base. A one-time pull. Comprende? Lo entiendes? Do you get my drift?
Looks a good tool, but I'd be really concious of creating extra damages everytime you drop the little puller onto the car's paint work - I cringed everytime it happened and there seems to be a long scratch next to the dint after the third attempt - ouch ! But thanks for sharing.
No scratch. That may be glue residue. It all wiped off.
Thank you, useful video 😊👍
love the detailed instruction.
Hi, did you heat up the area using heat gun before using the dent puller ?
Thanks for the reply.
@@harjotsandhu2354 LOL!
@@basesperanca LOL it's good to laugh
Did that puller come with oil?
Good video ❤
Thank you 🙏
Got this kit also has black glue as well is there a difference.
Black glue has less holding power than the clear
91% isopropyl spray will release the glue 😊
....and the paint as well.....
@ac-qi3gi as long as you get it off fast and don't let it sit
goo gone?
@ac-qi3gi no it won't.
6 dents in on my hood frm acorns
My mom asked me to pull the dents from Hail out of her car as she had bought a kit from amazon...no problem or so I thought....went over counted around 90 dents watched this video then told her to call her insurance...this would take days to complete, lol....
did it not leave like a million scratches or is that me
It's you. Anything that is there can easily be removed with some polishing.
I have a dent twice that size in my door. Does that method work for doors too?
Yes. Use bigger pull tabs. Just make sure the door has not been repainted at some stage as the glue can pull off paint.
Could you give me the link, please!
can you use that method when the dent have paint chip?
yeah but its not going to magically get repainted, r ight?
Same question here. Have a small dent similar to above with a paint chip. Want to pull out dent before touching up. Afraid the glue may remove additional paint.
@@lwhittyas a pdr beginner, I don’t recommend glue pulling it. If the paint of the car isn’t a factory painted then glue pulling the dent will cause the paint to pull off as well
Next video "How to fix scratches caused by pulling"
There was zero scratches. That was hot glue residue. Pay attention
I just paid a Mexican $275 to get this done
Could’ve said person lmao
dam good effot !
Or get a decent PDR Pro and get it out 100%
Some people just like the satisfaction of doing something with their own hands, being independent, and having the ability of doing it over and over. Saving money is one side of it, but there are more sides to most DIYers.
@@basesperancaagree completely.
Your using to much glue
Note will not stick to ceramic coats.
Oh darn. I just got my car ceramic coated by the dealer.
@@cbsharpe0824can just polish off the coating in that small area and then recoat it easily after the repair, that’s what I did.
@@HellzHonour Okay, good to know. Thank you!
Long process
Yeah im gunna pass on putting glue on my car 😂
If you're doing this in the cold, it's a good idea to use a heat gun (or hairdrier) to heat the paint up so it will not chip. Additionally, alcohol should be used to get rid of the glue, it comes right off. I'll be trying this on my new (to me) BMW which comes with dents on the hood "pre-installed". God help me.
Thats good,u shudnt be touching your car if you have no idea what your doing.
Causes more damage than He tries to fix :D
Does he?
@@TheRoadLessChosen You blind? Look at the scratches he's left.
@@bungietwab4868 those aren't even scratches, easily hand polished out.
@@bungietwab4868 aren't those just fine threads of glue?
Just smeared glue. Wiped off. No scratches.
Ok so i just damaged dads car, im fucked i guess
How so?
You're dead
Well doing this all yourself wasn’t a great idea
I feel that you are just a beginner at pdr....
Reason i say this is BECAUSE YOUR NOT EVEN USING YOUR LINEBORD,that is literally the first thing ANY pdr tech learns how to use... you literally have that light on for no reason
He literally is moron! He said he bought a kit and has done a few dent before! He didn’t go to school. Give helpful advice instead of being a moronic critic
You're supposed to clean off the excess glue after every single pull....man,this guy has absolutely NO IDEA what he is doing, there are zero reasons to take advice from this beginner
If you are such a pro why are you watching the video
@Nolan320 i am actually an autobody specialist with 5 years experience,nevertheless it does not take a "PDR pro" to have tips and tricks to protect paint and clear coat when working outside of your trained profession..
On another note..this guy is using the line board only because he thinks it makes him look like a true pro lmao...he isnt even using the effin thing,he just has it on;reflecting atleast 2.5 inches away from the dent he is working on...A LINE BOARD IS NOT FOR LOOKS,IT IS AN ACTUAL TOOL WHICH UTILIZES ITS REFLECTION TO MAKE THE TARGET DENT MORE VISIBLE AND EASY TO ANALYZE...ALSO the line board helps you keep track of the tip of your push rod as you are pushing from the backside of the dent...other than getting lucky,how else can you assure that you are pushing on the exact part of the dent you are aiming for?...
I promise you this,and this statement is valid for EVERY SINGLE PROFFESSION YOU CAN THINK OF...if you dont know how to use your tools effectively and efficiently,YOU ARE NOT A "PRO"....
Im not full of myself,i know im not a "PDR PRO"....but i can use my tools with confidence and ALWAYS stand by my work.
looks like he did a pretty good job to me . the dent is gone. but yes cleaning the area before more pulls would be good practice. but he knows what hes doing by the way he pulled it smalk bits at a time.
@jesseurlacher5773 cleaning the area has little to do with the amount of dance that is left over when he is done, not cleaning the surface will make it more difficult for the glue to adhere, but the absolute most important thing to do is to clean the surface because that is the most effective way you can lower chances of scratching the paint we're chipping the paint.
Cleaning the surface beforehand isn't as much of a tip as it is proper procedure for any kind of body work...weather your sanding,pullin dents,or applying vinyl wrap you ALWAYS clean the surface beforehand..
@@glitchthecat5011 IDK HE DID A PRETTY GOOD JOB FROM MY POINT OF VIEW
Bbbahahahahahhahahahahahab " it's getting harder for me to see the dent so I'm going to put some marks around here" what do you think the line board is even 4?... why is a beginner trying to give advice