Thanks for posting.. I told the mechanic at the shop that my TIRE SENSOR MONITOR light was lit on the dash. He said its most likely a sensor that needs to be replaced... $106 part & Labor! I was able to reset it with the help of this video. Thanks again!!
Eap0323 I don’t know if you’ve figured this out by now but 08-12 Malibu’s do not allow you to self program a key fob, I looked all over the internet and even went to my Chevy dealership and they said only the dealership can do it. How ever, do not buy the key fob from them, they tried to sell me my key fob for $85 and program it for $60. I bought my key fob off of eBay for $12 and got two of them, I had them program it for the $60 though lol.
Always start with the tires inflated to the proper range, that's what I do. Fill them all to say, 35psi. Then SLOWLY let the air out, the sensors are very sensitive, they need to register a change but if you let the air out quickly, it might not catch it. I've had tires filled right out the tire shop doors at 45 so "hey I'll do the relearn by releasing air down to normal" and that hasn't worked 3 out of 3 times! Weird huh? I've done this dozens of times across multiple Chevy vehicles. Fill to 35, let air or slowly for 15-20 seconds, You'll be successful... providing the sensors aren't dead ;) then re-inflate after they're properly programmed, have an air compressor handy or be at a gas station that has air when doing this.
I think you just saved me some money on replacing my tire pressure monitor system (TPMS) on my 2011 Chevrolet HHR after two years of saving money!!! THANK YOU!!!!
@@LiviNParadisehi no one answers there questions anymore I'm hoping you can please help me I have a 2011 chevy Malibu 3.6 ltz need to change oil pan! My question is,it this a hard job I can't find my year and engine anywhere no videos nothing at all
Hi there I have 2010 H H R Tire Service comes on few times got 2 new tires front need 2 back my Car Alarm doesn't work apply the same steps that you showed in the video thanks
Hey quick question. What happens if the key is on the on/ off position ready to reset in the ignition. Push the unlock and lock buttons at the same time. Even though where the doors are unlocking and locking up. The horn doesn't make a sound.
Hello Friend. My Malibu did not detect the left front sensor LF, so I followed the steps of the video, but when something bad happens, I no longer detect any sensor, all the marks in white. Might you help me?? What I can do??
Hello! I tried to follow this video, but when I did the first tire, it honks twice. I tried the second tire but it never did anything. Is that sensor just bad in the first tire? What could be happening? I did it multiple times.
What you wanna do is, start by deflating or inflating the tire driver side first. When your car beeps, go to the passengers side & do the same thing. Work your way around the car clockwise. But remember to put the key on the on position and hold the lock n unlock buttons to start the program.
Thats wierd it started yesterday and today i the bak tire because wen it started thats the tire dat it didnt have the percent of the air i cheked it and i saw that it had two nails so i went to tire shop and fixed it but its still tellin me the svc tire monitor
Did the check engine light go away? I'm having the same issue, however I think the sensor in my tire is faulty so I'll probably have to replace it. The check engine light turned on right after I started having those issues.
my 2011 chevy malibu loses air pressure on all four tires. I tfilled them up and A week later, the warning lights came on they were low. RF 26 LF 29 Both rears 28. The car had 55,000 miles on it so I took it to get new tires. A week later the lights came on again. So I took it back and they said they put on new valve stems. About a month later, it started again. Tires are low pressure. LF 26 RF 28 RR 28 RL27. I can't believe it. I have to pump up the right front each week for sure. It was on 27 and a week later I went to go to the store and it said it was 22. How can 4 brand new ties with new valve stams lose air on all four tires? I have NEVER had a car do this. I don't drive much but that is still no reason to lose air, day by day when it's garaged. Now it's doing it about every three days I have to pump up the right front tire to 30 psi. It says 30psi but when I googled it just now a lot of sites say a 2011 should be 35psi. I'm lost.
Going to try this tomorrow, hope it works for me!! Thanks for the awesome video. 1 question, Why do you inflate the 2 front tires first then deflate.....Than on the back you just deflate, Please explain?
You wanna deflate or inflate drivers side tire first ClockWise. When hear a beep, you will need to go to the passenger tire and do the same thing. Work your way around. Good luck
Yes there is, follow the prompts through the instructions on the steering wheel. I just did mine today. I do not have a key fob. My car is a manual transmission, windows, etc...
I did the process and was successful with air pressure at 40, but the SVC Tire Monitor appeared again. Now the LR tire shows the sign - -. All the rest show 40. Did I do something wrong? Do I need to redo the process?
Awesome..but I tried it and at first my front tires and the right rear will honk so i did it again and now only my front tires would honk, I tried it all over again and still..its now showing blank for all the tires on my dash..any help?
nana xzii You Must Follow These Instructions. Insert your Key into the Ignition & Turn it to On Position, But Don't Start The Car. Next, On your KEYPAD, Hold The Lock & Unlock Button for 5 Sec. Next, Driver Side Wheel, You Will Deflate or Inflate That Wheel until Your Horn Beeps, Go Around to the Passenger side & Deflate or Inflate until Your Horn Beeps. Next Will be the Passengers Rear Wheel. Follow the same steps & Next will be the last wheel. Once Completed your Horn will double beep. Good Luck
I just put on snow tires, they're all at the proper psi, but my 2010 Malibu will not register it on my dash. Just shows the blank slots. I'm going to try and reset everything by disconnecting the battery and turn the key on and off twice... Then reconnect the battery... hopefully that will clear the alarms and reset the psi readings. We'll see. Is this a normal issue with snow tires?
I have a ? I have a 2011 Malibu and the svc light came on but I don't got a remote.would I have to buy a new remote or could I still do the process still
My tire sensor monitor has gone off but then my car heats up to the point of overheating. Not sure how there is a link but it's done it twice now. Ideas?
Maranda Nelson , exactly I realized i have a bad sensor too, yesterday my car was stopped while I'm driving it shows on the screen ( engine disabled ) took it to the shop, there is an electric petition with the car PC and it is fixed now
use ruclips.net/video/PbmKpCxXYPI/видео.html if you don't have remote. Basically you press the info and reset buttons on left side of steering wheel for one sec. and it will go to another menu, scroll to tire learn and press enter then proceed as Livi'N'Paradise has so kindly shown to clear code and relearn each sensor for location. I has same issue pop up when replacing dead battery. Hope this helps. I would suggest checking out the other clip I have in this comment for starting the process. Both very helpful and don't forget to subscribe to help Livi'N'Paradise. Thanks to everyone who posts these helpful videos!!
Tried it on a 2011 Malibu. I was really hoping it would work, because I had only one sensor not reading after a tire patch. I tried it 3 times and now all the sensors are reading blank " -- ". Any suggestions?
@@michaelweis2565 Hmm, Are you doing it in the right order? Starting with driver front tire, Passenger front tire, Passenger rear tire and last driver rear tire.
@@LiviNParadise Yes, Correct order indicated by the lights. Filling tires all up to 35 psi starting out, start the process with the key in auxiliary, hear the double beeps, leave the key in the same position, follow the direction of the lights indicating which tire to go to, deflate slowly until it beeps, last tire (driver side rear) deflate until a beep then double beeps. Last time I did it, I disconnected the battery for at least 30 seconds.
i didnt have to do that. just add air to the tire thats lower than 30 PSI because the average psi for each tires supposed to be at least 30 to 35. once a tire goes lower than 30 the car tells you to they need service. Once all your tires or between 30 snd 35 your gonna notice the service light still comes on. give it a couple of days to let the car realizes the tires been serviced and the light disappears. this happened to me personally . see if it works for you
I tries again and again and again. It did't work on one of the tires. I read somewhere that it may be the sensor. I'm going to order a new stew with sensor and try it again. Thanks for your help.
I got a remote key fob from autozone for around $50, it comes with a keyless entry fob and an installer. It all took less than 2 mins to program it yourself.
I tried left front first, then the dash board shows the data for the right front tire. After reset it again, I tried right front first, the dash board shows rear left first. Fk this BS. Why everytime I tried to do something with my vehicle, something unexpected just happend!
Thanks for posting.. I told the mechanic at the shop that my TIRE SENSOR MONITOR light was lit on the dash. He said its most likely a sensor that needs to be replaced... $106 part & Labor! I was able to reset it with the help of this video. Thanks again!!
Baileigh Parker thats a rip mine is only costing 27$ and 10$ labor.
Do you know how to activate new remote
Eap0323 I don’t know if you’ve figured this out by now but 08-12 Malibu’s do not allow you to self program a key fob, I looked all over the internet and even went to my Chevy dealership and they said only the dealership can do it. How ever, do not buy the key fob from them, they tried to sell me my key fob for $85 and program it for $60. I bought my key fob off of eBay for $12 and got two of them, I had them program it for the $60 though lol.
Always start with the tires inflated to the proper range, that's what I do. Fill them all to say, 35psi. Then SLOWLY let the air out, the sensors are very sensitive, they need to register a change but if you let the air out quickly, it might not catch it. I've had tires filled right out the tire shop doors at 45 so "hey I'll do the relearn by releasing air down to normal" and that hasn't worked 3 out of 3 times! Weird huh?
I've done this dozens of times across multiple Chevy vehicles. Fill to 35, let air or slowly for 15-20 seconds, You'll be successful... providing the sensors aren't dead ;) then re-inflate after they're properly programmed, have an air compressor handy or be at a gas station that has air when doing this.
John Giallanza don't work for me
Second tire never beeps. But shows on the monitor so is it bad sensor ???
Worked great for me after replacing one sensor on 2011 malibu. Tire shop couldn't reset, but this video did the job. Thanks!
I think you just saved me some money on replacing my tire pressure monitor system (TPMS) on my 2011 Chevrolet HHR after two years of saving money!!! THANK YOU!!!!
This was commented 3years ago did it ever come Back did it work for you ?
I just bought a new (UESD) 2008 Malibu LTZ model and I can say it worked I just did it and took me about 4 mins ... thank you very much !!!
Your welcome, subscribe
Saving this video thanks 5 years later
@@LiviNParadisehi no one answers there questions anymore I'm hoping you can please help me I have a 2011 chevy Malibu 3.6 ltz need to change oil pan! My question is,it this a hard job I can't find my year and engine anywhere no videos nothing at all
Helplpp I cant pay 500 for this replacement if I can do it on my own I subscribe helpppp
Thank you for this video cause that light has been driving me crazy for a while.
Just had tires rotated, I had the warning, you got me going again. Many thanks!
Thank you for the video. I was able to fix myself. It took about 45 minutes, total. So worth it :)
Thanks man
very useful and saved me a trip to the mechanic
Help me by Subscribing, Thanks
What if you dont have a key fob
@Matias Krew did it work
Exactly
Soooo?
Some cheaper scan tools can put it into learn mode. I have a $400 can tool and it activates learn mode.
You buy a key fob
Thanks a lot. It worked on my 2012 malibu LTZ2
What if your Keyless entry doesn't work - is there another way to start the process
Wat to do if u don’t have the lock keypad
I don’t have a key fob. How do you make it work without a key fob?
Same
You can't push lock and unlock at the same time without a key fob.
If you don't have a key fob, then you need a scanner to go in and do it
Is it going to work on chevy malibu 2008?
Are you over inflating the tire then letting air out and horn beeping when tire reaches it correct tire pressure?
So do you need to fill the tires with air first before releasing
Thank you! Worked like a charm. Saved me a trip to the dealer.
Thank you for your video. Save me $100 bucks to fix the problem.
Thanks it worked exactly as u said
does this work with a Pontiac g6 2010
Is there anyway to do this without using your keypad? My lock button is no longer working on the keypad.
I don't know
Just open up your keypad and glue aluminum foil to the inside of the buttons. It will work good as new! Had the same problem with mine.
Thank you so much for this video and many blessing to you!⚡️
Hi there I have 2010 H H R Tire Service comes on few times got 2 new tires front need 2 back my Car Alarm doesn't work apply the same steps that you showed in the video thanks
Will this work on a 2009 Chevy Malibu? Also, what do you do if you don't have a key fob?
Hey quick question.
What happens if the key is on the on/ off position ready to reset in the ignition. Push the unlock and lock buttons at the same time. Even though where the doors are unlocking and locking up. The horn doesn't make a sound.
Any luck ?
Hello Friend. My Malibu did not detect the left front sensor LF, so I followed the steps of the video, but when something bad happens, I no longer detect any sensor, all the marks in white. Might you help me?? What I can do??
Thanks...this flashing is driving me nuts.
What if i dont have the remote is there another way to do it ?
Hello! I tried to follow this video, but when I did the first tire, it honks twice. I tried the second tire but it never did anything. Is that sensor just bad in the first tire? What could be happening? I did it multiple times.
Yes, Sounds like a bad sensor. Ty Subscribe
Thanks!
What if u have a aftermarket key pad ???
Usually the second tire shows on monitor but it does beep; is it bad one ??
Hey I don't have the original lock keypad I have a viper auto starter will it work with that?
What you wanna do is, start by deflating or inflating the tire driver side first. When your car beeps, go to the passengers side & do the same thing. Work your way around the car clockwise. But remember to put the key on the on position and hold the lock n unlock buttons to start the program.
ok now i just did it and its still on!?
the SVC Tire Monitor?
+Livi'N'Paradise yea its the samething i did all for wheels
Sounds like a computer error.
Thats wierd it started yesterday and today i the bak tire because wen it started thats the tire dat it didnt have the percent of the air i cheked it and i saw that it had two nails so i went to tire shop and fixed it but its still tellin me the svc tire monitor
what if you 2 beeps of the horn, does that indicate a bad sensor ?
Did the check engine light go away? I'm having the same issue, however I think the sensor in my tire is faulty so I'll probably have to replace it. The check engine light turned on right after I started having those issues.
shouldn't get check engine light, just tire icon light. Different problem. Need to keep an engine code reader in your Malibu at all times!
livi N paradise I was wondering I just installed 22's on my car and had this light popped up all I got do is this on my 22's ?
Great video man
Very very helpful
Thank you
thanks for this instrucion video help and save money
great video ut when i get to front passenger side, let almost all air out and get 2 beeps of horn. help 2012 chevy malibu
my 2011 chevy malibu loses air pressure on all four tires. I tfilled them up and A week later, the warning lights came on they were low. RF 26 LF 29 Both rears 28. The car had 55,000 miles on it so I took it to get new tires. A week later the lights came on again. So I took it back and they said they put on new valve stems. About a month later, it started again. Tires are low pressure. LF 26 RF 28 RR 28 RL27. I can't believe it. I have to pump up the right front each week for sure. It was on 27 and a week later I went to go to the store and it said it was 22. How can 4 brand new ties with new valve stams lose air on all four tires? I have NEVER had a car do this.
I don't drive much but that is still no reason to lose air, day by day when it's garaged. Now it's doing it about every three days I have to pump up the right front tire to 30 psi. It says 30psi but when I googled it just now a lot of sites say a 2011 should be 35psi. I'm lost.
Mine was saying this first now it's saying service ESC. Can't wait to trade mine off.
So if it doesn’t work it means I need to replace the sensors I guess?
Going to try this tomorrow, hope it works for me!! Thanks for the awesome video. 1 question, Why do you inflate the 2 front tires first then deflate.....Than on the back you just deflate, Please explain?
You wanna deflate or inflate drivers side tire first ClockWise. When hear a beep, you will need to go to the passenger tire and do the same thing. Work your way around. Good luck
AHHHHHH...ty for responding!!!!
Deflate or inflate all four
Once doing this did anyone’s pop back up after you reset? Wanted to know before I try🥺
it worked for me, however if it does come back on. then it could be your sensor on the wheel
What is the problem if it wont reset. I went by video which was exultant info.thanks
Perfect, great video. thanks!
what if you don't have the key fob? Please tell me there is another way? Do i use the instructions key on the steering wheel?
Sorry, no other way
Yes there is, follow the prompts through the instructions on the steering wheel. I just did mine today. I do not have a key fob. My car is a manual transmission, windows, etc...
Linda Luna I need help to ...no key pad
My LR one just wont get recognized
What brand sensor did you use?
nice worked for the left front and rear right but not for right and left rear.
So what if I do the first tire and it beeps 2 times?
My 2012 Chevy Malibu ls beeps twice on the third tire then the light for the fourth one never turns on like it did for all the others
hi what if you don’t have a key dongle thing
Is it possible to do without the keyfob ? (Unlock , lock control)
I am wondering the same thing
I need answers, anyone figure it out?
??
I did the process and was successful with air pressure at 40, but the SVC Tire Monitor appeared again. Now the LR tire shows the sign - -. All the rest show 40. Did I do something wrong? Do I need to redo the process?
Try Resetting it again.
Won't let me do it my key fob says low battery. But brand new any ideas ?
Does it’ work on a 2008 Malibu
Thanks works as explained on a 2008 Impala LTZ
What if you don’t have a key fob?
Awesome..but I tried it and at first my front tires and the right rear will honk so i did it again and now only my front tires would honk, I tried it all over again and still..its now showing blank for all the tires on my dash..any help?
nana xzii You Must Follow These Instructions.
Insert your Key into the Ignition & Turn it to On Position, But Don't Start The Car. Next, On your KEYPAD, Hold The Lock & Unlock Button for 5 Sec. Next, Driver Side Wheel, You Will Deflate or Inflate That Wheel until Your Horn Beeps, Go Around to the Passenger side & Deflate or Inflate until Your Horn Beeps. Next Will be the Passengers Rear Wheel. Follow the same steps & Next will be the last wheel. Once Completed your Horn will double beep. Good Luck
nana xzii Make Sure To Subscribe.
FASTLIFE thank u, will try again
Did this ever work for you? I'm having the same issue you had.
Sheena Baylon did u end up fixing it, bcuz I'm having The same issue
Sho you let air out and.put it back in?
I tried this method but remote control didn’t work like in this video
Thanks this was a big help
How did you switch thru the menu at the end
Thanks for posting by the way I been trying to get rid of the problem for a while now
On the left of your Steering Wheel there should be a button that says (info) click that.
I just put on snow tires, they're all at the proper psi, but my 2010 Malibu will not register it on my dash.
Just shows the blank slots.
I'm going to try and reset everything by disconnecting the battery and turn the key on and off twice...
Then reconnect the battery... hopefully that will clear the alarms and reset the psi readings.
We'll see.
Is this a normal issue with snow tires?
What if i don't have my keyless entry
I think I love you 😍 Was about to waste money on a new sensor smh
I have a ? I have a 2011 Malibu and the svc light came on but I don't got a remote.would I have to buy a new remote or could I still do the process still
you would need the remote. Subscribe
My tire sensor monitor has gone off but then my car heats up to the point of overheating. Not sure how there is a link but it's done it twice now. Ideas?
Hmm, sounds like you have another issue. Take it to Auto-Zone and have them run a diagnostics, it's free. Thanks Subscribe
I do not have a key fob what can I do?
Thank you, i did the same and every tire did horn at the end the screen shows there is no pressure what should i do ?
Shmed Med mine is like that in one tire. i have a bad sensor. i have to take it to get a replacement. the sensor is not that expensive very cheap :)
Maranda Nelson , exactly I realized i have a bad sensor too, yesterday my car was stopped while I'm driving it shows on the screen ( engine disabled ) took it to the shop, there is an electric petition with the car PC and it is fixed now
Will this work on my 15 malibu
use ruclips.net/video/PbmKpCxXYPI/видео.html if you don't have remote. Basically you press the info and reset buttons on left side of steering wheel for one sec. and it will go to another menu, scroll to tire learn and press enter then proceed as Livi'N'Paradise has so kindly shown to clear code and relearn each sensor for location. I has same issue pop up when replacing dead battery. Hope this helps. I would suggest checking out the other clip I have in this comment for starting the process. Both very helpful and don't forget to subscribe to help Livi'N'Paradise. Thanks to everyone who posts these helpful videos!!
Do you gotta do it for the 4 wheels if only one is the one that's messed up?
Alpha Macho yes
so I have this warning now. but it also doesn't read my RR tire. does that mean I have a bad sensor?
I have the same issue with the LR
+Jose Andrade my warning went out..all I did was check my tire pressure with a tire gauge on all 4 tires.. no more warning!
Tried it on a 2011 Malibu. I was really hoping it would work, because I had only one sensor not reading after a tire patch. I tried it 3 times and now all the sensors are reading blank " -- ". Any suggestions?
Try unplugging the power supply from the battery for like 30 seconds and then follow the steps again. Try that.
@@LiviNParadise , Thanks for the info. Still getting the same result.
@@michaelweis2565 Hmm, Are you doing it in the right order? Starting with driver front tire, Passenger front tire, Passenger rear tire and last driver rear tire.
@@LiviNParadise Yes, Correct order indicated by the lights. Filling tires all up to 35 psi starting out, start the process with the key in auxiliary, hear the double beeps, leave the key in the same position, follow the direction of the lights indicating which tire to go to, deflate slowly until it beeps, last tire (driver side rear) deflate until a beep then double beeps.
Last time I did it, I disconnected the battery for at least 30 seconds.
@@michaelweis2565 , At this point. I have no clue. Might be a computer error in your vehicle .
Will this work for a 09?
Thanks
Worked :)
It would be cool if just once a trick would work for me any vehicle ever.
I feel that man 😂
i didnt have to do that. just add air to the tire thats lower than 30 PSI because the average psi for each tires supposed to be at least 30 to 35. once a tire goes lower than 30 the car tells you to they need service. Once all your tires or between 30 snd 35 your gonna notice the service light still comes on. give it a couple of days to let the car realizes the tires been serviced and the light disappears. this happened to me personally . see if it works for you
This procedure is to get cars computer to recognize the correct location of each tire pressure sensor.
What if you key lock button doesn't work on your car anymore
I'd get a new one from the dealer. Subscribe
I don't have key less entry
I followed the video and all tires beeped except for one. All of my pressure monitors are showing a blank line now. What should I do?
Try it again, all four tires must beep to complete.
I tries again and again and again. It did't work on one of the tires. I read somewhere that it may be the sensor. I'm going to order a new stew with sensor and try it again. Thanks for your help.
Não existe esse vídeo em português?
My 2009 HHR dopes not have a keypad (remote). What do i do?
Horatio Bennett Bbl
I have the key pad but when I hold it down the car never honks, why is that?
This here needs answers
Teria como traduzir esse vídeo.
what if you only have a manual key
I got a remote key fob from autozone for around $50, it comes with a keyless entry fob and an installer. It all took less than 2 mins to program it yourself.
Thank you. It worked with me.
Quantas libras de ar seria o correto para o pneu aro 18?
Can't get it to honk twice at the beginning
Watch the entire video before proceeding.
It came back.
You have a bad censor on one of your wheels.
The other one said let air out. I give up
My car isn't reading my RR tire can I just inflate that one until it beeps or do I have to re set it for it to work?
Restart the Programming. If it doesn't read that specific tire, then the sensor with that tire is bad.
Ok thanks!
u have facebook lol
no
Livi'N'Paradise do you have to take the whole air out?
okay I do not have keypad so how would I access the dash board? I too am trying to get mine off
Without the keypad, there's no other way.
you can by scan diagnosic tool
you need car electician for that
Sad didn’t work for me but then again maybe doing it wrong
This sweet as fuck I'm going to do it today thank you so much for your video
How to do that without key????
Use a pen
What do you mean by use a pen
I tried left front first, then the dash board shows the data for the right front tire. After reset it again, I tried right front first, the dash board shows rear left first. Fk this BS. Why everytime I tried to do something with my vehicle, something unexpected just happend!