In this video, I made the arm that moves the headlight myself. For the part where the light is turned off, I used the Receiver Controlled Switch, see 2:40 of the video. The V2 video in the link ( ruclips.net/video/eLcWrIYLS04/видео.html ) uses Micro Switch more simply.
Thank you. For more information, please see this link. www.dropbox.com/s/4wg1hg4c7irrepc/%EC%82%AC%EC%A7%84%202015.%2010.%2030.%20%EC%98%A4%EC%A0%84%209%2000%2052.jpg?dl=0
+안명철 from the mechanical side it's clear to me. I mean how do I tell the servo to get to open close and half open position from the electronic side. if I connect the servo just to the receiver I can only get into two positions. open and close. or is there something in between?
Hey man good little build you got there I'm trying to make some ae86 lights ATM where did you get the retractable light buckets from please and also could you explain how you get the sleepy eye effect to be be a great help thanks
Ben Rowe Sorry, delayed answers. You can find retractable light bucket link when you search 'D-Craft AE86 Trueno Retractable'. And sleepy eye effect has been using the AUX2 lever of the Sanwa MT-4s Controller.
안명철 I see. I meant the way they seem to be swapped, one for the other. The popup headlights seem to be exchanged from originally meanted. They should angle like / \ and not \ /
I'm actually building this body right now. ordered the same light buckets minus the flip up lights from yokomo :( I can't seem to find them anymore. What did you use to tint your tail lights?
형님... What servo do you use..? I use the mini servo 9g from aliexp*** and use the futaba receiver and transmitter.. but the servo is going hot .. but when I use sanwa.. the servo is normal operation.. How about that.. ??
chips ahoy As you know, shipping cost is depends on the size and weight. But i think it cheap. Usually the small product delivery(Not EMS) from Hong Kong to South Korea is about $2.8~$4.5 and big product(ex, rc body) delivery(EMS) cost is about $20~$30.
Yannick Margot Gundam Marker Fine for panel lines www.gundamplanet.com/media/catalog/product/cache/1/image/370x/d1e45073b049284d4096233a1fa94db5/g/u/gundam-marker-fine-liner-gmxx_2.jpg
Very nice body choice and fantastic build.
Great work! I love the work and effort you put in to this body. I will share this with my friends.
great build! my fav. car! looking awessome!
you say its your favorite car however you have a Mazda RX-7 photo for your avatar.
TheGrayOne I set that "avatar" like 10 years ago. I'm just lazy to change it
This is beautiful. Good job!
Amazing build
How did you attached the rear and front bumper
There is alot of videos they don't show us how the made it lol, just imaging how u gonna make it
@@-allaasilki-rc3853 yeah too
Are the arms that open the headlights part of a kit or did you make those? How did you wire it so the headlights are off when down?
In this video, I made the arm that moves the headlight myself. For the part where the light is turned off, I used the Receiver Controlled Switch, see 2:40 of the video. The V2 video in the link ( ruclips.net/video/eLcWrIYLS04/видео.html ) uses Micro Switch more simply.
cute, how much is it?
very nice build!
how can i tell the servo for the lights that there are three positions?
Thank you. For more information, please see this link.
www.dropbox.com/s/4wg1hg4c7irrepc/%EC%82%AC%EC%A7%84%202015.%2010.%2030.%20%EC%98%A4%EC%A0%84%209%2000%2052.jpg?dl=0
+안명철 from the mechanical side it's clear to me.
I mean how do I tell the servo to get to open close and half open position from the electronic side. if I connect the servo just to the receiver I can only get into two positions. open and close. or is there something in between?
Cant u put a body kit with this body ?
Hey man good little build you got there I'm trying to make some ae86 lights ATM where did you get the retractable light buckets from please and also could you explain how you get the sleepy eye effect to be be a great help thanks
Ben Rowe Sorry, delayed answers.
You can find retractable light bucket link when you search 'D-Craft AE86 Trueno Retractable'.
And sleepy eye effect has been using the AUX2 lever of the Sanwa MT-4s Controller.
1:30 shouldn't the lights be swapped? Or is that mean look intention to deviate from original
angle?
Tried to make them look 'sleepy eyes'
안명철 I see.
I meant the way they seem to be swapped, one for the other.
The popup headlights seem to be exchanged from originally meanted.
They should angle like / \ and not \ /
Do the servos for the headlights come with the body? And does a rear spoiler come with the car?
Silver Leøpard4 They are not included
Like the music alot
I'm actually building this body right now. ordered the same light buckets minus the flip up lights from yokomo :( I can't seem to find them anymore. What did you use to tint your tail lights?
You can find it to shop.tetsujin.biz and i used tamiya ps-31 to tail light
+안명철 Thank You so much. I checked many places for these!!! A lot said sold out.
Great work!!!
if it will be for sale let me know :)
Hi how much would you build this same body for and ship to Australia willing to pay
Sorry~
please help me ! will this shell fit a hpi drift 3 its 200w and a 254 wheelbase on stock shell and if not what will.
It's will fit to 200w and 254 wheelbase body.
+안명철 ok cool and how with the rims fit 26mm with a 9mm offset
And what size would should i get for a deep dish jdm look
how did you attach the bumpers? did you use lexan glue? i have a body and was just wondering before I mess it up lol. Thanks nice build!
+swedman255 I'm sorry for late reply. I was attatched bumper with "Sports Goo"
How did you attach the bumbers? I just got mine and was wondering.
I was used 'Sports Goo'
img.asap.com.tw/A/show/2014/0131/AM0000024/201401AM310000024_019486671.jpg
+안명철 thanks man!
형님...
What servo do you use..?
I use the mini servo 9g from aliexp*** and use the futaba receiver and transmitter.. but the servo is going hot .. but when I use sanwa.. the servo is normal operation..
How about that.. ??
Hino Ranger Hi~ I used Turnigy TSS-10MG. Weight 10g, Torque 2.5kg.cm
안명철 are you use a BEC for that servo..??
Hino Ranger No. just connect servo to 4ch of receiver.
안명철 okey... I will try it.. hope it usely..
Where did you get those light buckets...
you can buy it www.upergdrift.com maybe ^^
안명철 thanks for responding, I have ordered it and can’t wait
How did you attach the hood vent things?
Matt Bowlin Yes~
안명철 Best answer..... On the internet....... Ever.......
Hello
how cost the shipping of rc mart?
chips ahoy As you know, shipping cost is depends on the size and weight. But i think it cheap.
Usually the small product delivery(Not EMS) from Hong Kong to South Korea is about $2.8~$4.5 and big product(ex, rc body) delivery(EMS) cost is about $20~$30.
how did you get the headlights to move?
Danny Zuko I useing 4ch lever of sanwa m12s
Did you paint everything on the inside or outside?
Inside~ except window frame
how do you attach the wing
JAY FROS used bolt~
@@MekkiGold ok thanks
need setup from the controller?
No. Just need EPA settings.
Would you sell this ?
What pen did you use for part line?????
Kingsley Su It is 'Monami Name Pen T' goo.gl/images/J8Z1au
What rc chassis did you use?
It's Wrap-Up Next FR-D v2.0
👍
what red paint did you use
It is Tamiya PS-60 Bright Mika Red
thank you!
Where did u connect the servo?
4ch~
Thanks
whered you get those wheels
IMAWSOME458 It is 'OVERDOSE WORK EMOTION XT7'. www.rc-art.net
which pen do you used for the drawing lines? KG
Yannick Margot Gundam Marker Fine for panel lines www.gundamplanet.com/media/catalog/product/cache/1/image/370x/d1e45073b049284d4096233a1fa94db5/g/u/gundam-marker-fine-liner-gmxx_2.jpg
Anyone know what rims these are
It is 'Overdose Work Emotion XT7'
+안명철 thanks. What offset
+Ryan Squires 7mm
+안명철 Cool
BGM？
What is a good battery for this car?
Recommend 7.4v 90~100C Discharge Batteries
안명철 Thank you! And did you have to buy the electronics for the headlights and taillights to light up? If so, what kind do you recommend?
Silver Leøpard4 i recommend ‘Exceed Su-Led-11R’
I owned the real car 25 years ago.
Thomas Winston I envy you 👍🏻
@@MekkiGold It was a 1990 pig nose, which I prefer and in cherry red pearl AH3. I miss it greatly, well engineered car. 👍
how much who can by
Sorry, i cant get you, you want to say 'How much can i buy it?'