Tractor Pulling is an old sport, originated with farmers obviously. Have a local annual pull contest in a park near me, always wakes me up sleeping in on that weekend every summer for the past 40+ yrs LOL The harmonic dampers for the big power comp tractors, is key to keeping them together for the run. We're talking massive Loads! Those tires are deff shaved like monster trucks do with theirs. Not a big enough market, to make specific pulling tires, those tires were orig made for a real farming tractor.
Need to get Sammit connected with the American Giraffe! Cleetus could help push him past a million. Let's try to get Sammit to the next crown vic race!
Yes it was a coyote in the F150 i almost died when you said it's an LS lol but to be fair you did correct yourself, wish we had gotten the Barra here in the states such a cool engine just a shame it weighs a TON!
Sammit great vid definitely like being a kid in a candy or toy store and looking forward to more build series vids have fun in CT in my neck of the woods great work 👍
Sammit that transmission that you stopped at with the straight cut gears and the LSD was this generations nascar box. I used to work for Xtrac they handle all of the corporate Motorsport gearboxes.
Yes that f150 has a coyote. And yes Matt Field's C8 is FD legal but he's not planning on driving it in FD yet. He's gonna take it to things like gridlife I believe to see how it feels first.
At 15:09 that pro charger is driven off the crank, I'm pretty sure so it can match the rpm of the engine it can also be pullied up and down for more or less boost
Sam they use that tank to fill and pressurize or vacuum fill the radiator on that pre runner truck. That radiator is probably tough to bleed the air out of otherwise.
The Williams Brothers from Montana were Tractor Pulling Legends in the 70's and 80's...the tractor I saw them use had 2 allison aircraft engines...full pull everytime. They also have the world's largest tractor - the Big Bud 747 tractor - I went to school with them from Big Sandy, MT.
i want to see that G16E-GTS 3 cylinder engine in an 80's AW-11 MR2... light and powerful and compact.... it would be perfect for that tiny engine bay and cut back on weight
I'd be happy to answer any questions you might have about the diesel vehicles you saw or just have a conversation about diesel racing here in the states
Sam if you are in the US for a bit beyond the shop I work at a tuning shop on the east coast. Would be great to have you randomly stop by and check out the cars we are building here. We even have a few cars speced out for daily/drift setups. We are in Massachusetts let me know if you are interested!! Since you are coming to Connecticut we are right next door!!! I want to see how well you can drift my daily driven IS300 with an NA (for now) 2JZ.
Damn man would be sick to Meet you but I’m in upstate ny home of the back road mountain twisties and winter time haha ice racing and all that coming this year!!! Got My ice racing Subaru ready to go! One day would be cool maybe I’ll travel to Japan!
Daiki do u need a hyper sonic clean lol in that big tub? Haha had me in tears....... Does the Artec kit include in take or is it just exhaust Sam? Just u only concentrated on the exhaust side.
I was at PRI with my company. I went to go talk to PRP, Link, HKS, Plazma Man and Artec. All of them were great except Artec. Will not be using anything from them.
I was at the link and garrett booth for a while today. Would love to link up if you're going to be there tm/sat. We should be rolling back in around 8-830am
Sammit that pipe bender for $2150 at sema that is only for the screen 😢 than you have to buy the Hydraulic table starting at $6,000. When you showed the flyer on your video I was ready to go and buy one at that price. Then of course, like some companies, they always gotta do some trick with marketing.
Mmmmmm Prp selling their diff for 10,500$ I’m assuming that’s Australia $. To US Dollars that’s roughly 6500. Right? You can buy a quick change for a fraction. Then axles and still have enough for a carbon drive shaft
Youre shop is big enough for the equipment you want but it isnt big enough to be the showroom and the machine shop. You need too keep the cars in another location imo.
If that k swap mini peaks your interest rpt creations makes swap kits for mini k’s you’ll need parts from a rsx to do the swap and it’s a very easy swap
Im ready for the sam and ruddy content sam coming and joing the haggard boys for a few weeks cant wait to see what you guys get into
Tractor Pulling is an old sport, originated with farmers obviously. Have a local annual pull contest in a park near me, always wakes me up sleeping in on that weekend every summer for the past 40+ yrs LOL The harmonic dampers for the big power comp tractors, is key to keeping them together for the run. We're talking massive Loads! Those tires are deff shaved like monster trucks do with theirs. Not a big enough market, to make specific pulling tires, those tires were orig made for a real farming tractor.
Pleasure meeting you at PRI. Thanks for taking time for a chat
I hope you had a great time in my city on the coldest week we've had all season!
Thats the truth
Need to get Sammit connected with the American Giraffe! Cleetus could help push him past a million. Let's try to get Sammit to the next crown vic race!
He could definitely get connected with cleetus throu boosted Bois
Yes it was a coyote in the F150 i almost died when you said it's an LS lol but to be fair you did correct yourself, wish we had gotten the Barra here in the states such a cool engine just a shame it weighs a TON!
Always cool seeing your perspective on the new tech and how you've used it in your cars. Also insane the amount of cool stuff there.
Sammit+Daiki=youtube algorithm!
PRI looks like a blast... I'm gonna have to make it out there one of these years... Id have to leave the credit card at home for sure
Sammit great vid definitely like being a kid in a candy or toy store and looking forward to more build series vids have fun in CT in my neck of the woods great work 👍
Sam, pallet racking cab gain you a ton of space. Machines can go under first shelf, storage all above.
13:21 it does have the vibe of an VL, Quality work 👌
Imo it's more like the VK not the VL.
@@AK-yc9du the height size of headlights I'm with you on that.
Xd falcon
A couple weeks of rudnick and Sammit content? Oh snap gonna be nuts
You need to bring the comp car next year
Cool to see you there and get a quick fist bump. Much love from West Virginia
Sammit that transmission that you stopped at with the straight cut gears and the LSD was this generations nascar box. I used to work for Xtrac they handle all of the corporate Motorsport gearboxes.
The sam and ruddy content is going to be soo fire like the last time!! 👍🏾👍🏾👍🏾
love to see this. I live only about 45 minutes away from the convention center!!
Yes that f150 has a coyote. And yes Matt Field's C8 is FD legal but he's not planning on driving it in FD yet. He's gonna take it to things like gridlife I believe to see how it feels first.
The show was great fun this year!
Let's gooo Sam Ruddy content ❤
9:50 thats a transaxle. Rearmounted engine = trans at the rear axle aswell.
At 15:09 that pro charger is driven off the crank, I'm pretty sure so it can match the rpm of the engine it can also be pullied up and down for more or less boost
would love to see more of that TT-CR-X! :)
Sam they use that tank to fill and pressurize or vacuum fill the radiator on that pre runner truck. That radiator is probably tough to bleed the air out of otherwise.
That place looks insane!! I built that tractor on an old game street legal redline racing didn’t realise it was based on a real thing! 😂
The Williams Brothers from Montana were Tractor Pulling Legends in the 70's and 80's...the tractor I saw them use had 2 allison aircraft engines...full pull everytime. They also have the world's largest tractor - the Big Bud 747 tractor - I went to school with them from Big Sandy, MT.
Did i just hear big power rb project 18:00, new comp car engine?
This is definitely on my to do list 💯
Yo the fox body and VL turbo comparison was on my mind too Sam 😂
SEMA is more about FORM. PRI is more about FUNCTION.
I love your sema and pri videos
Damn didn''t know you'd be coming to Indy and PRI! Never been but its cool to see you in my home state
ive never been this early but im glad i am
Hey you have to look into at 220V iron worker that has a sheer on one side and a punch on the other. game changer!
Well good morning Sam! Early vlog for us in Europe, nice.
bummer i missed you, would have been a hoot walking the floor with you i freak out there, there are more sales folk there than engineers like me.
Support comment from Guam 🇬🇺
Pretty sure the green tt fox has a 7.0L 427
Hope the boys from Bad Obsession Motorsport don't see the Celica GT4 at 22:46, otherwise Project Binky will take another 11 Years to finish.
😂 They would put the kettle on,play some fonk, and make another bracket or two...
5.0 13:16 Sam it’s a coyote
need the vlogmas intro
i want to see that G16E-GTS 3 cylinder engine in an 80's AW-11 MR2... light and powerful and compact.... it would be perfect for that tiny engine bay and cut back on weight
I'd be happy to answer any questions you might have about the diesel vehicles you saw or just have a conversation about diesel racing here in the states
The fox body is America's nissan "Skyline". They look very similar when you get to the R32....at least to me lol.
years ago my brother had a GT42 R on a 13B extend port in an FC and it was awesome
SAM IT SAM IT SAM IT
Sam if you are in the US for a bit beyond the shop I work at a tuning shop on the east coast. Would be great to have you randomly stop by and check out the cars we are building here. We even have a few cars speced out for daily/drift setups. We are in Massachusetts let me know if you are interested!! Since you are coming to Connecticut we are right next door!!!
I want to see how well you can drift my daily driven IS300 with an NA (for now) 2JZ.
I love you sam we share a birthday but been here for 4 years and your Amazing just wanted to tell you
I wanna see you build a 2001, 2002 spec drift car. All retro parts and livery etc
Damn man would be sick to
Meet you but I’m in upstate ny home of the back road mountain twisties and winter time haha ice racing and all that coming this year!!! Got
My ice racing Subaru ready to go! One day would be cool maybe I’ll travel to Japan!
So cool man. Live outside indianapolis currently still at work pulling a 24 hours shift as a fabricator lol or I would have been there. Enjoy indy
Next time go to the pri premeet car show it's usually Friday evening at the fairgrounds people in indy would love to see you there
crazy seeing you in down town Indy were im from.
Biiiiiigggg boi
I really want to see HKS booth
tractor pulls man you should check out some vids on youtube
Bring Tanaka San and the comp car.
🔥🔥🔥🔥
Considering how many people have put a k20 in mr2, and civics, i'm surprised nobody has done it in an alltrac/gt4
Daiki do u need a hyper sonic clean lol in that big tub? Haha had me in tears.......
Does the Artec kit include in take or is it just exhaust Sam? Just u only concentrated on the exhaust side.
I was at PRI with my company. I went to go talk to PRP, Link, HKS, Plazma Man and Artec. All of them were great except Artec. Will not be using anything from them.
Not normally this early 😂
Jesus Sam way to piss off Ford and Holden guys I one sentence 😅
Da tractor u saw is used in tractor wit trailer drag racing 🏁
the green car defs look like a vl commodore
🤘🎉🍿💨
I was at the link and garrett booth for a while today. Would love to link up if you're going to be there tm/sat. We should be rolling back in around 8-830am
Dammit sammit If you didn't have 10 cars lol you would have space to have work shop equipment lmao 🤣
You are like 45 minutes from me. Wish i knew you were coming
it's "10% more power per frame size," not 20 - directly from Garrett
Sam after hanging car there was a dude walking he was yellow wtf lmao 🤣
Sammit that pipe bender for $2150 at sema that is only for the screen 😢 than you have to buy the Hydraulic table starting at $6,000. When you showed the flyer on your video I was ready to go and buy one at that price. Then of course, like some companies, they always gotta do some trick with marketing.
Did you hit the window at the Shields booth? I’m a fabricator for the motorsports department there!
if u wanna review a 1968 firebird in georgia im for it!
peace
Green 4 hulk ford
🎄☃️🖤👌
What What
That a seligh pulling tractor
Mmmmmm Prp selling their diff for 10,500$ I’m assuming that’s Australia $. To US Dollars that’s roughly 6500. Right? You can buy a quick change for a fraction. Then axles and still have enough for a carbon drive shaft
I’m pissed I missed you at PRI…
Fun fact my uncle got banned from the local tractor pull for winning too many
Thumbnail a teaser for a future project?
Youre shop is big enough for the equipment you want but it isnt big enough to be the showroom and the machine shop. You need too keep the cars in another location imo.
Sam get a gt4
😂😂😂
It's called Bil-Stein German word, not Blistan
i think the tractor is european
Skip SEMA... just go to PRI.
Americans cars are over built 😅😅😅
This is a performance show....
If that k swap mini peaks your interest rpt creations makes swap kits for mini k’s you’ll need parts from a rsx to do the swap and it’s a very easy swap