🚨🚨Grab Replacement Earpads Here➡➡ (Click "Read more" for all links) Wicked Cushions Store - bit.ly/3K3LEd7 Amazon USA - amzn.to/33cClXO Amazon UK - amzn.to/3FmbANM Amazon Canada - amzn.to/3rfpuMl Amazon Australia - amzn.to/33fmRlV Amazon India - amzn.to/33pXu0q 📩 For any questions, contact us at : cs@wickedcushions.com 📩
Helpful and easy to understand guide, i noticed the difference immediately, my friends shouldn't be complaining about me being too quiet anymore, thanks to you !
I got my HyperX Cloud 2 headset back in 2018, and back then there was no video to sort the low mic volume issue. After weeks of searching I gave up. So happy I found this! Now I don't have to put the mic almost in my mouth for people to hear me! Thank you!
Dude. Thank you so much, for the past month I've tried countless things to improve my mic volume. I updated my drivers, I cleaned my mic, I cleaned my AUX port, and I changed the volume on Microsoft and ROG SupremeFX. But the Peace software helped it haha thank you!
I've owned these headphones for years and have always found the sound quality excellent but the low mic sound was driving me crazy! This works! Thanks a lot!
At what part exactly are you getting stuck at? Would you try and send me a screen recording to or@wickedcushions.com and I will try to see what is going on exactly
Wicked Cushions so basically when i open ”sound” and click on recording, the bar says 0.0db and when i try to higher it its stuck. Have no idea how to fix it
I've been living in ignorance for the past 2 years using Hyper CloudX 2's not realising how quiet I really was for people. Finally dug into the settings and seeing my mic barely peaking at 15~ in Windows/most games. So learning of this fix was a massive help. Thanks for putting this one up
The people that can't adjust the db from the window mic. configuration it's because window 10 doesn't allow doing it with the Usb mic. What you have to do to can adjust it's to install "Equalizer Apo" and "Peace" addon interface, it show in the video how to do it at min 3:00, then you open and give amplification to the mic around 10-15 the most recomended.
Most of the issues I noticed that people had was: 1) The mic was muted through the soundcard 2) You did not update the firmware on the soundcard 3) You might need to unplug and plug your mic back 4) Restarting your computer 5) Not having the headset chosen as the actual default device
had this problems for years, and found this video and it finally works like it should xDDD Didnt think the problems was this easy with just watching a quick video, thank you
It worked for me after 2nd time installing firmware software and rebooted computer. Then it show up from 0db untouchable to 75/100 sliding-able volume. Now i'm louder at 100/100.
Awesome guide! I bought a HyperX after some years on Logitech and people couldn't hear me if I didn't have my mic 0,5 cm from my mouth or told me I sounded like I have a sock in my mouth. Thanks a lot!
i dont know why, but no tutorials helped me make my microphone work except this one.. i disliked the apo program until i finally managed to boost my mic. thank you
OMG men i dont know how to thank you i was searching for years to fix my quiet mic and people and my friends were complaning how is my mic so quiet and because of you now my mic is like from russians players in CSGO. THANK YOU VERY MUCH SIR YOU DESERVE SUB FROM ME ONCE AGAIN THANK YOU SO MUCH
If anyone is having the issue of your level still being stuck at 0.0 dB, this was how I was able to fix it 1. Right click on the windows icon in the bottom left corner 2. Click on device manager 3. Click on sound, video, and game controllers 4. Right click HyperX Virutal Surround Sound 5. Uninstall driver 6. Restart PC and it should be working
Thank you my friend, it help me so so much ! I was a bit disappointed because my friends told me that HyperX Cloud II was a really good headset, and now I'm having so much fun on Discord. Have a good day
There are multiple answers in the comment section, people tried multiple things that worked. The most important - do not skip any part of the video. I can see data that people only watch half of this video, so my only guess is that you might have missed some crucial parts.
Thank you. I have my clouds like 5 or 7 years or so.. 2 sets of earcovers rotted out, the overhead "leather" and most of the filling is also looong gone, but what persisted is complains of friends that I sound too quite. I had no idea those phones have Firmware :D So Ive updated from 0003 to 0010 which unlocked the slider (75-100) in Windows Sounds menu. Before it was actually grayed out and I could not move it. Those apps also helped with the gain.
Thank you bro I'm a streamer on RUclips wintimo is my channel name I use this headphone the mic sound too low this really will help I think I will try it 😃 tomorrow
Sounds great now, but was still cutting out just on Discord - turns out it was Discord's 'Echo Cancellation' option. Turned that off, did a check with my buddy, and all is good!
Hey Wicked Cushions a quick question. I play on PS4. I downloaded the upgrade on my Hyper x Cloud II and got the Peace application working. I mostly play Warzone. My question is if I change the equalization settings, do they carry over when I use the headset with my controller? Or does it work only with the dongle? Or with the dongle and 7.1 on? Thanks! Subscribed as well.
After setting the mic volume to 100, I downloaded Equalizer APO and Peace software. After installing the software, I reset the PC and set the Peace software to 7. Now I can easily hear myself. My voice is coming in crystal clear. This is quite impressive software! Note: I DID NOT INSTALL HYPERX SOFTWARE! HyperX's software is crap. I'm using the preinstalled software.
thank you so much< my friend used to tell that my volume was to low and i didn't now what was the problem but now its good and he is so happy so thank you :>
If still locked on 0.0db check this ''I figured out the problem guys (the mic completely works and I can use the slider). In order to fix it, go to www.hyperxgaming.com/unitedstates/en/support/technical/downloads/87032 and click "Download Firmware" to download an update for the mic (right now, your mic is probably on version "0030", and the latest version is "0010" for some reason). Download and update firmware while the mic is plugged in, and when the download is complete, go to device manager > headphone microphone division > right click on it > uninstall device > unplug microphone usb > restart your pc. Now you can plug your usb again and go back to your Sound Control Panel and you should be able to move the slider.
Or also Most of the issues I noticed that people had was: 1) The mic was muted through the soundcard 2) You did not update the firmware on the soundcard 3) You might need to unplug and plug your mic back 4) Restarting your computer 5) Not having the headset chosen as the actual default device
Most of the issues I noticed that people had was: 1) The mic was muted through the soundcard 2) You did not update the firmware on the soundcard 3) You might need to unplug and plug your mic back 4) Restarting your computer 5) Not having the headset chosen as the actual default device
Hi I had a questions: I opened the control panel like you did around 2:30 in the video and opened up the headset properties through Sound --> recordings --> headset microphone properties --> levels, but at levels it doesn't say its at 75 or any other number it actually says 0.0dB. What does that mean? And how do I make it go back up to 100?
Most of the issues I noticed that people had was: 1) The mic was muted through the soundcard 2) You did not update the firmware on the soundcard 3) You might need to unplug and plug your mic back 4) Restarting your computer 5) Not having the headset chosen as the actual default device
people who are saying its stuck on 0.0 db, i had the same problem download the firmware restart your computer and it should work/ it took a little bit to work tho. hope this help.
Thanks, assuming this works, and it looks like it will , you're a life saver. Been doing it wrong for over 6 months now. EDIT: Meh, now my mic isn't working at all. It had some pop up about some configurator .txt file that I clicked yes on and wasn't in your video. EDIT: Seems that it's somehow only using my Laptop mic even though I picked the headset one now. It says the headset is default too oddly enough. FINAL EDIT: For some reason, I had to power cycle the headset by unplugging it. Works now.
I just want to hear myself a bit better while talking to my friends, I find myself yelling in the mic sometimes cause i can barley hear. Is this what I’m looking for?
In control panel > hardware and sound > sound audio devices > recording > levels my arrow is LOCKED and I cannot move it. It is stuck on 0.0 db. How do I change this? I have followed every other step in this video guide.
Done all the steps so headset has updated and set mic levels to 100 so nice one for that. however is there mic monitoring on PC because ive tried everything and nothing
Most of the issues I noticed that people had was: 1) The mic was muted through the soundcard 2) You did not update the firmware on the soundcard 3) You might need to unplug and plug your mic back 4) Restarting your computer 5) Not having the headset chosen as the actual default device
When going to elevate the level of the mic as you showed at the 2:28 minute on the video, the level is set at 0 and does not me allow to move the bar, to increase the level. Neither foward or backwards. Any tip on it ?
Most of the issues I noticed that people had was: 1) The mic was muted through the soundcard 2) You did not update the firmware on the soundcard 3) You might need to unplug and plug your mic back 4) Restarting your computer 5) Not having the headset chosen as the actual default device
I had the same issue for a while. All I did to fix it is not have the equalizer( the one you connect using the usb port) plugged in to the headset. That let me increase the volume of the mic. Not sure if this is the same issue for Apple User I hope not.
when i turn up the bar it turns up my actual mic volume so does that mean my mic sounds the same to other people bc i had to turn down my headset so i can hear normal instead of my ears bleeding from other games
If I turn my APO/Peace volume up for my mic, all my devices turn the volume up and it sounds too loud. Is there a way to set individual configurations?
Most of the issues I noticed that people had was: 1) The mic was muted through the soundcard 2) You did not update the firmware on the soundcard 3) You might need to unplug and plug your mic back 4) Resetting computer 5) Not having the headset chosen as the actual default device
Microphone is muted in Windows 11 except if you have a Blue Snowball iCE connected via Voicemeeter Potato (the latest version of Voicemeeter in this case).
Never heard of these apps, but check this out Most of the issues I noticed that people had was: 1) The mic was muted through the soundcard 2) You did not update the firmware on the soundcard 3) You might need to unplug and plug your mic back 4) Restarting your computer 5) Not having the headset chosen as the actual default device
cant turn mic volume up in windows settings. updated firmware. but when i get to the stage where my headset should be able to move from 75/100 etc... im stuck on 0.0 as i was before... what am i doing wrong... i have even reset the pc and unplugged my headset 4 or 5 times.... still says 0.0 on mic volume...
when i try to use the firmware updater it says " hyperx cloud 2 device not found please connect device and restart program" but i allredey have plugged it in. i dont know what to do
You mean the mesh in between the pads? if so, you can but you are exposing the speaker and it might stop working after several months. If you are talking about the microphone, you can, but the sound is much better with it
Hi, I have updated the firmware and also installed the Equalizer APO. When I go to setup the equalizer the hyperx cloud II does not appear in the menu to check it.
🚨🚨Grab Replacement Earpads Here➡➡ (Click "Read more" for all links)
Wicked Cushions Store - bit.ly/3K3LEd7
Amazon USA - amzn.to/33cClXO
Amazon UK - amzn.to/3FmbANM
Amazon Canada - amzn.to/3rfpuMl
Amazon Australia - amzn.to/33fmRlV
Amazon India - amzn.to/33pXu0q
📩 For any questions, contact us at : cs@wickedcushions.com 📩
@@nicd01 yep no legit firmware link here!!!
Helpful and easy to understand guide, i noticed the difference immediately, my friends shouldn't be complaining about me being too quiet anymore, thanks to you !
You are welcome!
I got my HyperX Cloud 2 headset back in 2018, and back then there was no video to sort the low mic volume issue. After weeks of searching I gave up. So happy I found this! Now I don't have to put the mic almost in my mouth for people to hear me! Thank you!
You're welcome! Really happy we could help! enjoy :)
@@WickedCushions its not working for me still cant increase volume from sound properties
@@HassanKhan-ck5gq you have to downgrade to the firmware in link then reboot your comp
Dude. Thank you so much, for the past month I've tried countless things to improve my mic volume. I updated my drivers, I cleaned my mic, I cleaned my AUX port, and I changed the volume on Microsoft and ROG SupremeFX. But the Peace software helped it haha thank you!
I am glad I could help!
I've owned these headphones for years and have always found the sound quality excellent but the low mic sound was driving me crazy! This works! Thanks a lot!
Happy I could help!
mine is still locked on 0.0db how the hell do i get out of that
Im asking the same question
At what part exactly are you getting stuck at? Would you try and send me a screen recording to or@wickedcushions.com and I will try to see what is going on exactly
Wicked Cushions so basically when i open ”sound” and click on recording, the bar says 0.0db and when i try to higher it its stuck. Have no idea how to fix it
@@OttoOhlberger Bro I got the same problem!
@@OttoOhlberger Can you send me a screenshot at what page you are to or@wickedcushions.com ?
I've been living in ignorance for the past 2 years using Hyper CloudX 2's not realising how quiet I really was for people.
Finally dug into the settings and seeing my mic barely peaking at 15~ in Windows/most games. So learning of this fix was a massive help.
Thanks for putting this one up
You welcome!
The people that can't adjust the db from the window mic. configuration it's because window 10 doesn't allow doing it with the Usb mic. What you have to do to can adjust it's to install "Equalizer Apo" and "Peace" addon interface, it show in the video how to do it at min 3:00, then you open and give amplification to the mic around 10-15 the most recomended.
Most of the issues I noticed that people had was:
1) The mic was muted through the soundcard
2) You did not update the firmware on the soundcard
3) You might need to unplug and plug your mic back
4) Restarting your computer
5) Not having the headset chosen as the actual default device
had this problems for years, and found this video and it finally works like it should xDDD Didnt think the problems was this easy with just watching a quick video, thank you
I am happy to hear that it worked out!
I have the same hyperx cloud 2 and had the same problem. My friends were complaining about not hearing me. You saved the day bro thanks.
Glad I could help
It worked for me after 2nd time installing firmware software and rebooted computer. Then it show up from 0db untouchable to 75/100 sliding-able volume. Now i'm louder at 100/100.
Glad you figured it out!
Awesome guide! I bought a HyperX after some years on Logitech and people couldn't hear me if I didn't have my mic 0,5 cm from my mouth or told me I sounded like I have a sock in my mouth. Thanks a lot!
Glad I could help!
thank you!! the equalizer app helped me !! now I can shout on my homies
Glad I could help!
i dont know why, but no tutorials helped me make my microphone work except this one.. i disliked the apo program until i finally managed to boost my mic. thank you
Glad i could help!
THANK YOU DUDE I HAVE A DIFFERENT HYPER HEADSET BUT IT STILL WORKED WOOOHOOOO THANK YOU IM SUBBING
You're welcome! Really happy we could help! enjoy :)
OMG men i dont know how to thank you i was searching for years to fix my quiet mic and people and my friends were complaning how is my mic so quiet and because of you now my mic is like from russians players in CSGO.
THANK YOU VERY MUCH SIR YOU DESERVE SUB FROM ME ONCE AGAIN THANK YOU SO MUCH
Glad I could help!
for some reason my hyper x cloud2 everytime when i check the volume to etst it on obs or discord the volume is very low how do i fix this problem?
Im not sure
If anyone is having the issue of your level still being stuck at 0.0 dB, this was how I was able to fix it
1. Right click on the windows icon in the bottom left corner
2. Click on device manager
3. Click on sound, video, and game controllers
4. Right click HyperX Virutal Surround Sound
5. Uninstall driver
6. Restart PC and it should be working
Thanks for the tips, that's very helpful 🙏
I followed everything and my mic says 0 and I cant change it
same
so after you install the firmware to 0010 you need to restart the pc to change the dB
@@mateuszdziezok8631 its ok now thx
@@mateuszdziezok8631 i did this i also restarted and i still cant change it what do i do?
@@cosi8193 same I cant change it and ive done everything
Thank you my friend, it help me so so much ! I was a bit disappointed because my friends told me that HyperX Cloud II was a really good headset, and now I'm having so much fun on Discord. Have a good day
Glad I could help!
Thanks man.This video help me a lot.Till now i had no way to increase my mic volume because i had old firmware and you solved my problem really quick.
Glad I could help!!
i have my headset updated to 0010 but the microphone slider still wont budge im stuck at 0.0db
same here
same
There are multiple answers in the comment section, people tried multiple things that worked.
The most important - do not skip any part of the video.
I can see data that people only watch half of this video, so my only guess is that you might have missed some crucial parts.
@@WickedCushions doesn't help much m8
After the firmware update it should work (at least for me)
Thank you. I have my clouds like 5 or 7 years or so.. 2 sets of earcovers rotted out, the overhead "leather" and most of the filling is also looong gone, but what persisted is complains of friends that I sound too quite.
I had no idea those phones have Firmware :D So Ive updated from 0003 to 0010 which unlocked the slider (75-100) in Windows Sounds menu. Before it was actually grayed out and I could not move it. Those apps also helped with the gain.
Glad I could help!
i instaled the update but its still locked on 0.0db
Check out my pinned comment
Thank you so much for this vid! I had problems with my hyperx headset when recording sustained tones. That has been fixed now! awesome!
Glad I could help!
thanks man this helped me so much! Finally i can earrape everyone haha
Glad I could help!
a tip: you can watch series at Flixzone. I've been using it for watching lots of of movies recently.
@Dillon Gregory Definitely, I've been watching on flixzone for months myself :)
@Dillon Gregory yea, I have been watching on Flixzone for since november myself :)
I usually don't like videos on yt, but this one is an exception, thx a lot
Glad you liked it!
Thank you bro I'm a streamer on RUclips wintimo is my channel name I use this headphone the mic sound too low this really will help I think I will try it 😃 tomorrow
Let me know how it went! Just subscribed to you
@@WickedCushions thank you !!!
i couldn't download the hyperx firmware, but the equalizer app did the trick. Thank you!
You're welcome!
Good video. Equalizer APO + Peace add-on recommended if troubles with microphone sound
Thank you!
Thank you. I was having this problem for a year now. This solved it.
glad I could help!
Great solution, easy and fast I couldn't move my dB normally. Thanks a lot!
Glad it helped!
amazing tutorial to always go back on. should be number one on search results
Thank you!
Im a bit reluctant on installing programs I know nothing about *BUT*
it worked and I dont need to scream to get heard
thx
Glad I could help!
2021 and it's still useful, it's the only possible solution!
Glad it still works!
Sounds great now, but was still cutting out just on Discord - turns out it was Discord's 'Echo Cancellation' option. Turned that off, did a check with my buddy, and all is good!
Glad it worked out!
thank you !!!! it worked with the equalizer app thx
Glad it helped!
thank you very much, I did everything according to your video and the microphone began to work well thank you !
Glad I could help!
Thank you soooooo much.
Been having this problem for weeks now, but this fixed it.😀
Glad it helped
i've did it, perfect ! Thanks!!
Great job!
Hey Wicked Cushions a quick question. I play on PS4. I downloaded the upgrade on my Hyper x Cloud II and got the Peace application working. I mostly play Warzone. My question is if I change the equalization settings, do they carry over when I use the headset with my controller? Or does it work only with the dongle? Or with the dongle and 7.1 on? Thanks! Subscribed as well.
It will not transfer with you to ps4 unfortunately :(
Thank u so much my friends shouldn't be complaining about me being too quiet anymore
you welcome!
Tried everything and this finally fixed my dead mic. Sad that you need to go through all this to get Kingstons product working.
Glad it worked out!
After setting the mic volume to 100, I downloaded Equalizer APO and Peace software. After installing the software, I reset the PC and set the Peace software to 7. Now I can easily hear myself. My voice is coming in crystal clear. This is quite impressive software!
Note: I DID NOT INSTALL HYPERX SOFTWARE! HyperX's software is crap. I'm using the preinstalled software.
Glad it worked!
Thanks for sharing this video, it worked on my headset PN: KHX-HSCP-RD, you have a new suscriber ;D
Thanks for the sub!
Thanks mate, that worked perfectly!
Glad it helped!
Finally fixed. Tyvm!
Glad I could help!
thank you so much< my friend used to tell that my volume was to low and i didn't now what was the problem but now its good and he is so happy so thank you :>
Glad I could help!
Helpful and easy to understand , thanks 🤩
You're welcome 😊
If still locked on 0.0db check this ''I figured out the problem guys (the mic completely works and I can use the slider). In order to fix it, go to www.hyperxgaming.com/unitedstates/en/support/technical/downloads/87032 and click "Download Firmware" to download an update for the mic (right now, your mic is probably on version "0030", and the latest version is "0010" for some reason). Download and update firmware while the mic is plugged in, and when the download is complete, go to device manager >
headphone microphone division > right click on it > uninstall device >
unplug microphone usb > restart your pc. Now you can plug your usb again and go back to your Sound Control Panel and you should be able to move the slider.
Or also
Most of the issues I noticed that people had was:
1) The mic was muted through the soundcard
2) You did not update the firmware on the soundcard
3) You might need to unplug and plug your mic back
4) Restarting your computer
5) Not having the headset chosen as the actual default device
the only way to make my mic audible was though peace. thanks so much for this.
You welcome!
great video, very straight forward setup.
YW
You, Sir, are a hero! 🤩
No you are!
This worked wonders, thank you. Do I need to start peace each time I restarted my computer or does it just always work?
You will need to open peace every time
you should be able to add peace to your base startup programs.
Well I got Hyperx Cloud 2, but when I try what you did 2:43 it is stucked on 0, any advices?
Most of the issues I noticed that people had was:
1) The mic was muted through the soundcard
2) You did not update the firmware on the soundcard
3) You might need to unplug and plug your mic back
4) Restarting your computer
5) Not having the headset chosen as the actual default device
hello thanks for the video
Thanks for the tips!
how do i disconnect my soundcard?
@@PointyLegs You just unplug it from everything and replug it
ok so now its 0 - 100 not 0.0dB anymore but the mic is still not working
@@PointyLegs Try to unplug the mic itself and replug it
Thank you for the video. It helped.
Glad it helped
tysm dude this was super helpful!
You are welcome!
Hi I had a questions: I opened the control panel like you did around 2:30 in the video and opened up the headset properties through Sound --> recordings --> headset microphone properties --> levels, but at levels it doesn't say its at 75 or any other number it actually says 0.0dB. What does that mean? And how do I make it go back up to 100?
Most of the issues I noticed that people had was:
1) The mic was muted through the soundcard
2) You did not update the firmware on the soundcard
3) You might need to unplug and plug your mic back
4) Restarting your computer
5) Not having the headset chosen as the actual default device
Did you manage to solve this ? because i'm running the same issue here... ;(
thanks SO MUCH this is the best vid to fix your headset with
Glad i could help!
Great video. Worked for me. Thank you.
Glad it helped!
people who are saying its stuck on 0.0 db, i had the same problem download the firmware restart your computer and it should work/ it took a little bit to work tho. hope this help.
Thank you
the update or?
You absolute legend man
Thank you!
Thanks, assuming this works, and it looks like it will , you're a life saver. Been doing it wrong for over 6 months now.
EDIT: Meh, now my mic isn't working at all. It had some pop up about some configurator .txt file that I clicked yes on and wasn't in your video.
EDIT: Seems that it's somehow only using my Laptop mic even though I picked the headset one now. It says the headset is default too oddly enough.
FINAL EDIT: For some reason, I had to power cycle the headset by unplugging it. Works now.
What a turn of events hahaa
Thank you so much this helped!
Perfect!!! Thank You!
You're welcome!
Thank you this worked wonders. Finally my friends that pretend they can't hear me can finally taste how loud I can be.
Glad I could help! make their ears bleed Koala
I just want to hear myself a bit better while talking to my friends, I find myself yelling in the mic sometimes cause i can barley hear. Is this what I’m looking for?
Not really, you are looking for mic sidetone - which this headset does not have
In control panel > hardware and sound > sound audio devices > recording > levels my arrow is LOCKED and I cannot move it. It is stuck on 0.0 db. How do I change this? I have followed every other step in this video guide.
Your mic might be on mute, that is why.
Done all the steps so headset has updated and set mic levels to 100 so nice one for that. however is there mic monitoring on PC because ive tried everything and nothing
Thanks mate it worked cheers
You're welcome. Glad to help.
Thank you so much, you really solved my problem
Happy to help!
thank you, it worked !!
Great!
Thx alot mate, i normaly speak a bit low and my friends say they cant hear. Great video
No problem 👍 I am glad I could help!
Thank you so much for the help man!
Happy to help!
you are a legend I subbed. Does this mean its already active on streamlabs so I can remove the gain filter (:
Glad I could help!
(PC) Very helpful, thanks!
Glad it helped!
Thanks, it worked!
You're welcome!
I really wish Hyper X would release this update for Mac OS...
Maybe they have, try contacting them
My headset microphone slider doesn't move, its stuck at 0
Most of the issues I noticed that people had was:
1) The mic was muted through the soundcard
2) You did not update the firmware on the soundcard
3) You might need to unplug and plug your mic back
4) Restarting your computer
5) Not having the headset chosen as the actual default device
Thank you worked for me, needed to disable windows smartscreen because it detected false virus.
You are welcome!
When going to elevate the level of the mic as you showed at the 2:28 minute on the video, the level is set at 0 and does not me allow to move the bar, to increase the level. Neither foward or backwards. Any tip on it ?
Most of the issues I noticed that people had was:
1) The mic was muted through the soundcard
2) You did not update the firmware on the soundcard
3) You might need to unplug and plug your mic back
4) Restarting your computer
5) Not having the headset chosen as the actual default device
I had the same issue for a while. All I did to fix it is not have the equalizer( the one you connect using the usb port) plugged in to the headset. That let me increase the volume of the mic. Not sure if this is the same issue for Apple User I hope not.
It does let you increase the mic volume, but for some people its still low
when i turn up the bar it turns up my actual mic volume so does that mean my mic sounds the same to other people bc i had to turn down my headset so i can hear normal instead of my ears bleeding from other games
You skipped a step, you went to all audio eq instead of mic eq.
If I turn my APO/Peace volume up for my mic, all my devices turn the volume up and it sounds too loud. Is there a way to set individual configurations?
Hey, are you sure ONLY the mic is chosen in the drop down?
i don't know if you're still looking at comments but its not letting move levels slider up.
Most of the issues I noticed that people had was:
1) The mic was muted through the soundcard
2) You did not update the firmware on the soundcard
3) You might need to unplug and plug your mic back
4) Resetting computer
5) Not having the headset chosen as the actual default device
You are a Legend Sir
Thanks
Microphone is muted in Windows 11 except if you have a Blue Snowball iCE connected via Voicemeeter Potato (the latest version of Voicemeeter in this case).
Never heard of these apps, but check this out
Most of the issues I noticed that people had was:
1) The mic was muted through the soundcard
2) You did not update the firmware on the soundcard
3) You might need to unplug and plug your mic back
4) Restarting your computer
5) Not having the headset chosen as the actual default device
@@WickedCushions none of the above occurs to me as I followed each and every instruction
cant turn mic volume up in windows settings. updated firmware. but when i get to the stage where my headset should be able to move from 75/100 etc... im stuck on 0.0 as i was before... what am i doing wrong... i have even reset the pc and unplugged my headset 4 or 5 times.... still says 0.0 on mic volume...
Restart your PC, unplug and plug the mic, unplug and plug the soundcard
@@WickedCushions tried it all mate. I just uninstalled the driver and its working without peace
Do I have to repeat the steps everytime I restart my PC? Seems to work great thanks bro
No, you just need to start peace and equalizer for it to work
how does ur mic soubd muffled, mine sounds clear. Do u change it in the advanced tab in the sounds control pabel?
I did not change it, just how it came
when i try to use the firmware updater it says " hyperx cloud 2 device not found please connect device and restart program" but i allredey have plugged it in. i dont know what to do
Are you plugged in through the soundcard ?
I’m going to buy this headset, but without the soundcard, is possible increase the volume on pc with the aux and not with soundcard???
You just use the pc to raise volume. There is nothing on the cable to control the volume
Can you take the pop filter off I’ve seen people do it
You mean the mesh in between the pads? if so, you can but you are exposing the speaker and it might stop working after several months.
If you are talking about the microphone, you can, but the sound is much better with it
i just wanted to make my mic go louder, but now i can even make my friends deaf lol
With great power comes great responsibility
Thanks bro! ✌
No problem 👍
Legend!
Thanks!
Hi, I have updated the firmware and also installed the Equalizer APO. When I go to setup the equalizer the hyperx cloud II does not appear in the menu to check it.
Try restarting your computer
Also, make sure you followed each step including setting up as a default device
gracias por el video me funciono muy bien
thank you m8 that helped so much
Glad it helped!
Thx mate it worked
Glad I could help