Awesome machining video! This is a great example of how this type of videos should be done. No unnecessary talking and no "cool youtuber dude" filming his face half of the video.
Hello Frankish, thank you for positive feedback, fly cutter is definitely must have and a fun little project with so many different approaches :) How big is your milling machine?
@@JustAnotherCraftsman Its a 9*32 inch knee mill (Its a Precision Matthew 932Ts 3 phase with a VFD). For a big FC I intend to angle the head so its 1 to 2 though off the vertical so I only cut on the leading edge as I only have about 24 inches of travel.
I genuinely like the wording "only 24 inches of travel" 😀 . I think that is plenty and it'll allow you to do a lot of projects. Also, the weight is important in term of rigidity and approx. 500 kg of Matthew 932Ts mill is good. Yes, no machine shop is big enough as well as no machine is big enough, but manipulating 100+ kg parts is no fun without crane. The heaviest part I machined was in the video about anvil restoration (90 kg) and I would definitely skip this opportunity next time 🙂.
@@JustAnotherCraftsman Yeah "only" right? I really wanted to buy the 949mill but it was above the rated weight for the tailgate delivery. One of the things that important to me is to not leave my Wife with several tons of iron she would have to deal with when I eventually pass away. At least with the smaller machine it was somewhat easier to move when its eventually sold. Mind you for only another $1000 the 949 was very tempting.
Anyone notice an advantage to mounting the bit holder vertically versus horizontally on a fly cutter? I’m in the process of building one and planned on machining an area for both.
is there some video on hot bluing? Because that seem like an amazing result you've got there. I have tried to build up a porous black oxide layer with electrolysis and has gotten half decent results but it isn't perfect.
Rust it and then boil it in water. I use warm hydrogen peroxide saturated with table salt then add like a third vinegar. Warm the solution and piece to like 40°C to help the reaction a little, then brush on the solution and it will foam up instantly. Let it react for a 30-60 s then brush with a plastic brush and repeat until you have a uniform rusted surface. Maybe plain water works but I've always been using tea as some say the tannin helps with pigment or something. Not sure if it has any chemical effect. The thing is that the boiling process turns the Fe²O³(red rust, hematite) into Fe³O4 which is black(magnetite). I've done it a few times on japanese style sword fittings, neckless and an armour bracelet. If you want it dark brown instead of black you don't boil it for as long.
@@JustAnotherCraftsman saudações amigo esporadicamente faço algumas matrizes de furação ou estampo gostaria de dar este acabamento preto no aço , qual e o processo???
Thank you, glad to hear that :). I used acidic bluing in this very case. The solution is combination of distilled water, vinegar, salt and hydrogen peroxide. It is the best approach for bigger parts, because unlike with alkaline bluing, there is no need to manipulate with large volumes of hazardous solutions. Amazing video, covering this topic, did channel dans-hobbies , video called: not so slow rust bluing
Whats best....Inserts of 1cm cobalt bar for cutter .?? Made a flycutter from old cast flywheel.. on stainless hub on iso40 .. now planning completion, but am newbie and not sure where to go from here...
I wouldn't call you a newbie, If you are already so far with your project. I designed mine for both, hss bars as well as carbide holders. Well, it depends a lot on what material do you plan to cut.
Hi, Would you mind telling me the part number or any info on the cutting tool. Looks like a boring bar. A good idea not to have to cut square holes. I'm at the point of tooling now. Thank You
It is an old Hauser boring head with MT1. There are many options out there, it depends what are your needs 🙂. You can find them cheap on aliexpress and similar platforms. Boring head or boring bar, as you've mentioned, is the correct term.
Thank You , I was wondering about the angle. The inserts could be purchased for the material. I enjoy your page. Thank You for your reply.@@JustAnotherCraftsman
Man, I gave you info on different tool, I just realized 😂. It is inner boring bar for lathe. I bought one from Beyond aliexpress store. I have long time good experience with them. The price is good for the quality. I don't remember exact type, but I can look once I get home. Thank you for the feedback 🙂
Thank you for the response 🙂. I belive that the starting thickness was around 30 mm and i ended up with 28 mm. I am currently out of shop, so I can't verify the dimension.
acidic bluing, you force rust a piece with combination of hydrogen peroxide, table salt, and acetic acid and than boil it in water, repeat if necessary
It's Hauser 2BA jig boring machine made in 1943. Old piece of equipment, but still very capable. I used it for casual milling of aluminium and plastics, before I bought my milling machine.
@@PoYoTheWild My uncle has the S28, what an amazing piece of machinery 😁. Ideal size for home workshop. You probably already know, but it used to be part of a mobile army repair shops, so called PAD - pojízdná armádní dílna - mobile army workshop
Awesome machining video! This is a great example of how this type of videos should be done. No unnecessary talking and no "cool youtuber dude" filming his face half of the video.
thank you, appreciate your feedback :)
Great video editing and machining skills!
Thank you :)
Great video, great project. Your design of balancing was a simple and great idea.
Thanks for sharing.
Thank you :)
Brilliant! I'm still setting up my new lathe and mill but a large and well balanced fly cutter is on my list of projects. Thanks for sharing.
Hello Frankish, thank you for positive feedback, fly cutter is definitely must have and a fun little project with so many different approaches :) How big is your milling machine?
@@JustAnotherCraftsman Its a 9*32 inch knee mill (Its a Precision Matthew 932Ts 3 phase with a VFD). For a big FC I intend to angle the head so its 1 to 2 though off the vertical so I only cut on the leading edge as I only have about 24 inches of travel.
I genuinely like the wording "only 24 inches of travel" 😀 . I think that is plenty and it'll allow you to do a lot of projects. Also, the weight is important in term of rigidity and approx. 500 kg of Matthew 932Ts mill is good. Yes, no machine shop is big enough as well as no machine is big enough, but manipulating 100+ kg parts is no fun without crane. The heaviest part I machined was in the video about anvil restoration (90 kg) and I would definitely skip this opportunity next time 🙂.
@@JustAnotherCraftsman Yeah "only" right? I really wanted to buy the 949mill but it was above the rated weight for the tailgate delivery. One of the things that important to me is to not leave my Wife with several tons of iron she would have to deal with when I eventually pass away. At least with the smaller machine it was somewhat easier to move when its eventually sold. Mind you for only another $1000 the 949 was very tempting.
man that is sooo nice!!
Thank you :)
Anyone notice an advantage to mounting the bit holder vertically versus horizontally on a fly cutter? I’m in the process of building one and planned on machining an area for both.
Nice one!
Thank you :)
Thank you :-)
Happy to help, you'r welcome :)
Very good 👍👍👍
Thank you 🙂.
is there some video on hot bluing?
Because that seem like an amazing result you've got there.
I have tried to build up a porous black oxide layer with electrolysis and has gotten half decent results but it isn't perfect.
Rust it and then boil it in water. I use warm hydrogen peroxide saturated with table salt then add like a third vinegar. Warm the solution and piece to like 40°C to help the reaction a little, then brush on the solution and it will foam up instantly. Let it react for a 30-60 s then brush with a plastic brush and repeat until you have a uniform rusted surface.
Maybe plain water works but I've always been using tea as some say the tannin helps with pigment or something. Not sure if it has any chemical effect. The thing is that the boiling process turns the Fe²O³(red rust, hematite) into Fe³O4 which is black(magnetite).
I've done it a few times on japanese style sword fittings, neckless and an armour bracelet. If you want it dark brown instead of black you don't boil it for as long.
Appears that I can't share certain things but I have an old video from 14 years ago where I make a bracer with some pictures of the oxidation process.
Fantástico, vou copiar e confeccionar uma kk
sinta-se à vontade para copiar o desenho
@@JustAnotherCraftsman OBRIGADO AMIGO
@@JustAnotherCraftsman saudações amigo esporadicamente faço algumas matrizes de furação ou estampo gostaria de dar este acabamento preto no aço , qual e o processo???
Awesome videography really relaxing to watch u got my subb👍🏽can I ask what you use for the bluing it seems to give a lovely finish
Thank you, glad to hear that :). I used acidic bluing in this very case. The solution is combination of distilled water, vinegar, salt and hydrogen peroxide. It is the best approach for bigger parts, because unlike with alkaline bluing, there is no need to manipulate with large volumes of hazardous solutions. Amazing video, covering this topic, did channel dans-hobbies , video called: not so slow rust bluing
Paráda! Krásné detailní záběry a pohodová muzika! Brynýr drží, neošoupává se? To je vlastní receptůra?
Moc děkuji, zatím drží, byl to můj druhý pokus s kyselým černěním a celkem spokojenost :), recept mám z youtube
Whats best....Inserts of 1cm cobalt bar for cutter .?? Made a flycutter from old cast flywheel.. on stainless hub on iso40 .. now planning completion, but am newbie and not sure where to go from here...
I wouldn't call you a newbie, If you are already so far with your project. I designed mine for both, hss bars as well as carbide holders. Well, it depends a lot on what material do you plan to cut.
Hi, Would you mind telling me the part number or any info on the cutting tool. Looks like a boring bar. A good idea not to have to cut square holes. I'm at the point of tooling now. Thank You
It is an old Hauser boring head with MT1. There are many options out there, it depends what are your needs 🙂. You can find them cheap on aliexpress and similar platforms. Boring head or boring bar, as you've mentioned, is the correct term.
Thank You , I was wondering about the angle. The inserts could be purchased for the material. I enjoy your page. Thank You for your reply.@@JustAnotherCraftsman
Man, I gave you info on different tool, I just realized 😂. It is inner boring bar for lathe. I bought one from Beyond aliexpress store. I have long time good experience with them. The price is good for the quality. I don't remember exact type, but I can look once I get home. Thank you for the feedback 🙂
Thank You@@JustAnotherCraftsman
It looks great! What do you use for hot bluing? Is it some kind of fat or grease?
Hello i used approach presented by channel dans-hobbies video - Not so slow rust bluing. All you need is vinegar salt and hydrogen peroxide.
@@JustAnotherCraftsman thanks
Well done.👍
what is the thickness of steel plate you've used for the flycutter?
Thanks.
Thank you for the response 🙂. I belive that the starting thickness was around 30 mm and i ended up with 28 mm. I am currently out of shop, so I can't verify the dimension.
@@JustAnotherCraftsman Merci
And where are you from mate? 🙂
@@JustAnotherCraftsman Nizhny Novgorod, Russia
What did you use to blacken the part?
acidic bluing, you force rust a piece with combination of hydrogen peroxide, table salt, and acetic acid and than boil it in water, repeat if necessary
What is the millimg mahine at 5:51 ?
It's Hauser 2BA jig boring machine made in 1943. Old piece of equipment, but still very capable. I used it for casual milling of aluminium and plastics, before I bought my milling machine.
TOS SN40?
You are very close, TOS SUI 40 😉
Another beautiful soustruh 😅, I have the classic s28
@@PoYoTheWild My uncle has the S28, what an amazing piece of machinery 😁. Ideal size for home workshop. You probably already know, but it used to be part of a mobile army repair shops, so called PAD - pojízdná armádní dílna - mobile army workshop
I saw some photos of a green s28 on the back of a army truck yes
I had an mn80 first, then sn16 and now s28. Will be the last one probably
The heavier the cutter head, the less the imbalance will be felt……………..n’est ce pas??
Indeed :)
Круглые таблетки рулят. Сваял фрезу под две таблетки. То что на видео и рядом не стояло.