Great kit sir I like those bump stopper and Professional behaviour with proof 12:02 enter questions in mind (surprise goodies for full kit )- thought in my mind 12:04 handled it like G 😂😂 (just a quality inspector and only in dreams full kit goodies or what 😂 😂 😅)
@@APGOFFROAD sweet. I know the Bronco Raptor has a Dana 50 in it, Lite Brite went over their Bronco Raptor in detail, and I can say your ProRunner is IMO a beefier setup than what Ford put factory on their Braptor. This rig you guys built is stunning and is exactly what I wanted to see come out for the "regular" broncos out there. Drolling over here lol.
Dana Axels 18k King Coils 8k Rear Bumper 2k Winch 1k Wheels and Tires 6k Brakes 8k Body Kit 12k Their custom fab 15k+ 70k~ without labor. A full build will be around 100k~ add the actual Bongo and you're at 160k~ Hmmm actually not terrible. But too broke to even think about ordering one.
Hey, love from India, just wanted to ask if there is a option for Dana 70s for both front and rear axle setup and 43 inches tyres on the bronco 2 door, and can you do it?
This is the same concern for every widebody, ever built. We have wider flare options for those wishing for complete tire coverage. For those who prefer tire reveal (which is the majority preference for off-road enthusiasts) every vehicle we build gets some strong PPF in the rear to protect the paint.
Why don't you weld a winch on a T hitch bar, just weld a hitch mother bar in front, wire front to back for the winch, put exterior power outlets and so you can move the winch front or back when you need it and let it at home when not off roading? It has the towing bar at the back anyway, so at the back only the power outlet and wiring as costs. I'm just saying.....
@@AllTerrainNation nice try.. excited to drive past the broken IFS Broncos on the trail. I mean... cant wait to see the rough and tough Bronco owners out there on the trail. Good for them at least they trying or Build a prerunner Bronco that still cant hang with a stock Rough Country 2in lifted Jeep.😂...✌❤😃
Meh, this thing can basically go anywhere your 2 inch lifted Jeep can and it will be just fine. As a bonus it is much better on the road where it will spend 99% of its time and it can rip down rutted out roads without damaging your kidneys.
Man only one more week until my Bronco goes into production. I can't wait to start the upgrade journey.
wow. This is the FIRST Bronco I have seen that was FULLY Modified and is Fantastic. I would actually spend my money on this. GREAT JOB GUYS!!!!
Thanks Patrick!
Best Bronco fender kit I've seen thus far and that says a lot with how great the others are as well.
The fenders on this one look great!
Thanks!
With the bronco being so new it’s awesome to see that the aftermarket support is going strong
Great kit sir I like those bump stopper and Professional behaviour with proof
12:02 enter questions in mind (surprise goodies for full kit )- thought in my mind
12:04 handled it like G 😂😂 (just a quality inspector and only in dreams full kit goodies or what 😂 😂 😅)
Best 40s setup yet.
Well now, finally something really special.
Well done George and everyone at APG
This has me drooling.
You guys should do a video comparing the Bronco ProRunner vs the BRaptor in the wild. 🤘🏻🤘🏻🤘🏻
That’s coming!
@@APGOFFROAD sweet. I know the Bronco Raptor has a Dana 50 in it, Lite Brite went over their Bronco Raptor in detail, and I can say your ProRunner is IMO a beefier setup than what Ford put factory on their Braptor. This rig you guys built is stunning and is exactly what I wanted to see come out for the "regular" broncos out there. Drolling over here lol.
@@Weidjeep Thank you!
The rear bumper looks nice. Very temping.
This is awesome George, love the detail in this video!
thanks luke
That is one hellova build! 😯
Amazing build!!! Thank you for sharing! Subbed instantly!
Awesome, thank you!
Dana Axels 18k
King Coils 8k
Rear Bumper 2k
Winch 1k
Wheels and Tires 6k
Brakes 8k
Body Kit 12k
Their custom fab 15k+
70k~ without labor.
A full build will be around 100k~ add the actual Bongo and you're at 160k~ Hmmm actually not terrible. But too broke to even think about ordering one.
Thanks for shittin’ on my dreams 😂
Hey, love from India, just wanted to ask if there is a option for Dana 70s for both front and rear axle setup and 43 inches tyres on the bronco 2 door, and can you do it?
Those fenders are so much better then the bronco raptors fender on fender design
Sick!
How do you keep the rocks off that rear (and expensive) carbon fiber fender?
This is the same concern for every widebody, ever built. We have wider flare options for those wishing for complete tire coverage. For those who prefer tire reveal (which is the majority preference for off-road enthusiasts) every vehicle we build gets some strong PPF in the rear to protect the paint.
The front diff it's strong enough for 40' tires?
We replace the front diff as well, we just didn’t have it in the video
Do you guys work on 90’s Bronco’s?
We can but we dont market it
@@APGOFFROAD okay, thank you!
What does this full setup cost?
50k?
Okay so now that we are all pumped up. Let the cat out of the bag……. How much$$$$$$
$30k to $250k depends on how much you want of it. Either just body or just suspension or everything.
Holy Jesus!
Could someone buy a fully built Bronco from you guys or would they have to bring their own Bronco to you to be built?
Yes they can, we have several vehicles in production at the moment that will be loaded on our website for review. We do not however offer financing
Will you guys be selling the hardtop separately?
Not directly from APG, but yes they are available. Contact APG sales for info
How much is the kits?
Do you have the body parts for a 2 door?
Yes
How do you keep rocks from wrecking the sides?
Rock sliders help, PPF for what gets through
@@APGOFFROAD I mean rock chipping the paint?
Rear sway bar removed?
Majority of broncos don’t have rear sway bars
Woow. How much? 🎉 This is my dream car now.
A bit of a deal breaker the dogs not included but still awesome build
just if u made it with 4runner it will be better but anyway awesome job really so good
Impressive to say the least 👏
Sweet, now put some of that stuff in my Chevy Tahoe 🤣
What is gear ratio
5:38
When’s the 2 door come out. The real bronco.
The only thing I seen that I didn't like was how flimsy the tailgate seemed when it was closed. It must rattle around like crazy when the dunes.
Good eye. We have already address this, build 001 didn’t have the rubber bumpers in.
If I just had $120K to throw away 😢😢
Shut up
F.... Me too,,
One day man 😉
On top of the cost of the Raptor
@@Crumb_Trails so it's like 190k??
the yellow bronco must not drive in germany because its wheels are not fully covored on the top.
5” flare covered the tire completely
Why don't you weld a winch on a T hitch bar, just weld a hitch mother bar in front, wire front to back for the winch, put exterior power outlets and so you can move the winch front or back when you need it and let it at home when not off roading? It has the towing bar at the back anyway, so at the back only the power outlet and wiring as costs. I'm just saying.....
Price$? Why u hiding that dude
😂😂😂
It's still not a Jeep.
Its not trying to be..
@@AllTerrainNation nice try.. excited to drive past the broken IFS Broncos on the trail. I mean... cant wait to see the rough and tough Bronco owners out there on the trail. Good for them at least they trying or Build a prerunner Bronco that still cant hang with a stock Rough Country 2in lifted Jeep.😂...✌❤😃
@@crazyfoot490ur delusional thinking this bronco build can’t hang with a jeep out in the desert
@@coltsuckandyrock lol✌❤😃
Meh, this thing can basically go anywhere your 2 inch lifted Jeep can and it will be just fine. As a bonus it is much better on the road where it will spend 99% of its time and it can rip down rutted out roads without damaging your kidneys.