now this is what you call a great engineer/driver right here. doesnt just stay at the pump panel he moving with a purpose and throwing ladders and tagging his own hydrant
Here he should have added a second or half length. And it's not true that he's a great engineer and driver fire engine operator, because he walks everywhere and does other things. On this call, he does it because they are short-staffed, what is the sad reality for many fire departments with personnel not in fire stations 24/7. Yes in the circumstances, he does an excellent job. He works quickly and returns quickly to his engine. But in fact, an engine driver, should remain at his pump panel at all times, if it's in operation.
@@gillesrenaud6926Buddy you don’t have any idea what you’re talking about. The notion that a good engineer is one that sits at his pump and does nothing is a sad and terrible one there wasn’t a need for another 50-100 foot section yeah there was a bend at the hydrant but as long as the pressures good to the truck it doesn’t matter. This truck is by most peoples standards fully staffed with 4 people. A good engineer is never idle, a lot of if not all of the pumps these days are set it and forget it because of things like governors in the engine. I very rarely saw him walk anywhere he mainly jogged or ran. Just accept he did a solid job and move on.
@@paintballgaming1090 Not to criticize, since every call could be better, but if you're going out of your way to specifically defend the driver on innocent suggestions of how he could improve, I'll just point out: 1) running on a fire scene is a liability, is unsafe, degrades cognitive function and decision making, yet you're here praising it; 2) the attack line pressures were likely inadequate (at 8:22 you can see they're running at or under 100 psi, which would be inadequate factoring in friction loss to get any meaningful nozzle pressure when they are likely running 75-100 psi nozzles on a truck like this); 3) I don't understand all the fidgeting with the LDH intake; 4) if you have guys making an interior attack you should be at or near your panel and have a secondary water supply actively secured, not be wildly running around the scene operating on tank water; 5) should have been on hydrant water sooner, isolating tank water as a secondary reserve; 6) once on hydrant water, finally, tank to pump should have been shut off sooner, and tank fill opened more to fill up that secondary water supply. Failure to secure and maintain a secondary water supply isn't a matter of preference, it's a matter of insuring life safety. All that said, again, I'm not criticizing, just pointing out imperfections that could be improved upon for the next call since paintball seems to think this was perfect and without room for improvement. Don't we all get better by learning from our mistakes and the mistakes of others? That's the whole point of training. I'll mirror @gillesrenaud6926: great job under the circumstances, but there's always room for improvement.
@@idahomikeyes mistakes were made, nothing wrong with learning from it as you suggest however point 1 and 2… if you heard in the beginning as the truck was pulling out, a person was trapped on the balcony. To me that requires a sense of urgency not a walk. As for number 2, this engine uses a CAFS so traditional fire hydraulics is irrelevant. Not attempting to start an argument just encouraging a good conversation.
Bro you can drive for me anyday. Can’t believe how I was so anxious watching this. The chauffeur has soooo many things going on in the 1st 5 mins. Great job dude!! I like how you refill your booster tank after you get hydrant water. You never know when you’re gonna lose hydrant water and you got guys in there that are relying on you so great job, also to everybody watching notice how he never stops moving! He’s got his chores done and he’s throwing ladders and pulling line
@Apollo55_ arsonists will sabatoge fire hydrants before lighting fires and if you dont flush it out before connecting the hose itll end up in the intake
@@Shadow-rw3bj Very interesting i didnt expect that arsonist thought so far ahead lmao arson always seemed like a crime of passion rather than a well thought out premeditated crime.
Was first due on a single family dwelling. No hydrant access. Narrow driveway with very little room and no way to get trucks past each other. We were getting ready to make entry when our engineer stopped us. The engine would not go into pump. He messed around for 30 sec then went to plan B. He pulled a 25 foot section of 5in and attached it to the tanker then started pumping with the tanker using the engine basically like a giant manifold. We lost maybe 2 min instead of ten if we had to move the engine and restretch lines. This then became SOP for all fires without hydrant access. We called it piggybacking. Engine plus tanker was 3500 gallons and gave us time to set up drop tanks and get a tanker shuttle going.
I dont comment on videos but this one was impressive everyone calm and collective and moving with purpose exactly how fire grounds should run as well as an engineer that knows his job nicely done brother
I am a retired driver engineer once they pull that line and you're working off of tank water the clock is ticking get the supply line you wind up being a lifeline for them
As an Engineer, I completely agree with you. The secured water source is the Engineer's priority! This call depends on that water source. I will prepare the tools that will be needed for the firefighters for this call but my main priority is to get that water and keep watch of that pump panel. If the IC calls on the Engineer for anything, for example a deck gun or for the mayday horn, I will be right there at my engine ready to give it. My IC, captain and all my firefighters will always know that their Engineer is at that engine manning their fire pump. Even being short staffed, everyone of our firefighters is doing their job that they've trained for, just like the Engineer. Depending on the amount of water that engine is carrying, you're losing time, that's why the Engineer is tested on their ability to secure that water source right when the pump is activated. Me, personally, I had 2 minutes to secure my water source while pumping water to my crosslays before I ran out of water in my 1000 gallon tank. This was my priority!
This was awesome to watch. Everyone seemed to know exactly where to go what to do and worked together really well. Props to the engineer as well for doing so much to help out his team! Model work guys! Side note: that engine of yours looks beautiful, and it's organized so well.
This driver reminds me of my driver from when I was running a regular shift! Such a solid driver! Also I am loving that the rescue officer/chief (making an assumption based on the helmet) is rocking the old school 3/4 rubber boots and blue jeans!
Kudos to the driver/pump,operator. Got one line charged off booster tank, ran his own supply line, got it connected and flowing, got 2nd handling charged, set both ladders, and then made sure his guys were getting a good nozzle flow. Excellent work!!
I remember when Andy Batch was the chief back in the 1960's. Looks like the department is still doing well at fighting fires. Watching from my ocean condo in Florida.
I'm all for switching to supply but I see a few things. - The indicator on the cab was full (or nearly) green the entire time so must not have been using much water. Truck has CAFS as the uploader has pointed out and it carries 750 gallons of water. In Part 2 they start feeding a ladder and go down 1/4 before switching to the hydrant. - 09:55 Can see the overflow under the truck after the valve was cracked. - You do get a bit more control of the pressures by not relying on the supply. Especially if other hydrants nearby are getting used. Again, I'd rather switch and save some wear and tear on the vehicle. Plus the obvious "hydrant fails" scenario and every bit of tank water helps.
@@idahomike The reason for this is when using CAFS {compressed air foam system} you operate at a lower pressure. typically, running off of the hydrant will over pressurize the system, so in order to deal with that, tank water is used. Some trucks are designed with that in mind and have a direct tank fill valve which will bypass the pump, and keep the tank topped off.
Incident Priorities: Life Safety they thought someone was trapped so they went for the rescue first. Incident Stabilization: Stretching at the same time as rescue and the line crew got their own water. Excellent Job! One question why doesn't the officer have or wear an SCBA?
Is it the mic on your camera or does your engine just sound hi-pitched? Also, nice work! I love seeing an engineer that's getting it done! Ive had a lot of lazy drivers in my day.
I noticed that too. When you switch to pump your tank you're supposed to open up the TANK TO PUMP all the way until you secure a water source then you can close it. It looked like he was opening and closing it.
I love the activity of the engineer. Just a question I have. Is gating down your intake a standard at your department. I have always been taught and always teach to never gate your intake down just gate your discharges.
First time seeing an Fire Engineer pushing buttons, fueling water from the water hydrant and turning knobs etc. to his fire truck, usually the other firemen does that since he already did the driving to the fire scene.
What’s the point of putting the attachment on the side of the hydrant, I have never understood that. Couldn’t u just leave the cap on? Not trying to critique I’m just a curious first year FF
I see a lot of comments of difference of opinion on the operator, its good to see an engineer moving and placing ladders but not before a adequate water supply. This is an apartment complex and water is crucial in this scenario, also there were no additional units on scene for a while so imagine if you have issues at the pump and you see your operator placing a ladder. Yes it seems lazy having a guy only at the pump be thats his job. Making sure pressures are good establishing a continues water supply protecting the guys inside. Also running on scene is a no. If he gets hurt then what? Trust your training not internet firefighters who never operated as an engineer.
Once you have hydrant tapped and flowing, whay not shut the tank to pump handle? I only say this as you want to have that tank as a back up in case hydrant goes haywire.
It’s gotta be just the sound quality but that pump sounds like it’s screeeaminggggg for help lol. Nice work, I’ll take a few of these little things the operator did into work with me tomorrow
Helluva job by the engineer and the crew, yall on top of your shit. genuine question do yall use the foam for everything or was it just in this case? i personally haven’t seen it used in situation before.
Thank you and yes we pump foam on every fire. Our engine has CAFS and has a build in air compressor so it makes handling any size line much easier. There are tons of benefits to CAFS. The only downside is the cost to install it on an engine
It's a pressure relief valve, which prevents pressure spikes from hydrant/second engine or tanker pressures from reaching the landlines used by firefighters
@@gp3918 The pump has an auto governor on it, when he opened the hydrant intake the engine slowed down, The old trucks you had to run the throttle with one hand while opening supply with the other to keep from knocking the nozzle man off his feet.
Not with the amount of water they are using, two- 1.75 lines use about 400 gpm, out of the 2000 gpm that supply line is capable of. If the engine was using everything it can then it can be an issue. Engineer has to be in good shape to be able to do the tasks required of him when short staffed. First in engines are always short staffed.
Sorry brother, that is one sloppy supply line. Gotta call it like you see it, no hydrant wrap, no cribbing, either park closer next time or you’re stuck using another stick.
@@vicstanfieldshire7754 not true. We have a 10 foot and a 25 foot extension ldh that can be used if longer distance was needed. This was the correct distance.
I'm wondering the same, once your running hydrant refill you tank and shut that off is what I have always been told and taught. That now tank that is full is used as an emergency situation only.
@@RCFD-C-Shift sure fooled me. The panel layout and the compartments look like the Stuphen I drive. Great video man!!! Talk about an example of a damn good engineer.
Calm and cool.... i dont mean to judge, but from the wear and tear on the equipment ( hose lines, turnout gear, ) it doesn't appear this is a normal situation... either way.. well done.. keep calm and go to work
now this is what you call a great engineer/driver right here. doesnt just stay at the pump panel he moving with a purpose and throwing ladders and tagging his own hydrant
Here he should have added a second or half length. And it's not true that he's a great engineer and driver fire engine operator, because he walks everywhere and does other things. On this call, he does it because they are short-staffed, what is the sad reality for many fire departments with personnel not in fire stations 24/7. Yes in the circumstances, he does an excellent job. He works quickly and returns quickly to his engine. But in fact, an engine driver, should remain at his pump panel at all times, if it's in operation.
@@gillesrenaud6926Buddy you don’t have any idea what you’re talking about. The notion that a good engineer is one that sits at his pump and does nothing is a sad and terrible one there wasn’t a need for another 50-100 foot section yeah there was a bend at the hydrant but as long as the pressures good to the truck it doesn’t matter. This truck is by most peoples standards fully staffed with 4 people. A good engineer is never idle, a lot of if not all of the pumps these days are set it and forget it because of things like governors in the engine. I very rarely saw him walk anywhere he mainly jogged or ran. Just accept he did a solid job and move on.
@@gillesrenaud6926 yeah suck it
@@paintballgaming1090 Not to criticize, since every call could be better, but if you're going out of your way to specifically defend the driver on innocent suggestions of how he could improve, I'll just point out: 1) running on a fire scene is a liability, is unsafe, degrades cognitive function and decision making, yet you're here praising it; 2) the attack line pressures were likely inadequate (at 8:22 you can see they're running at or under 100 psi, which would be inadequate factoring in friction loss to get any meaningful nozzle pressure when they are likely running 75-100 psi nozzles on a truck like this); 3) I don't understand all the fidgeting with the LDH intake; 4) if you have guys making an interior attack you should be at or near your panel and have a secondary water supply actively secured, not be wildly running around the scene operating on tank water; 5) should have been on hydrant water sooner, isolating tank water as a secondary reserve; 6) once on hydrant water, finally, tank to pump should have been shut off sooner, and tank fill opened more to fill up that secondary water supply. Failure to secure and maintain a secondary water supply isn't a matter of preference, it's a matter of insuring life safety. All that said, again, I'm not criticizing, just pointing out imperfections that could be improved upon for the next call since paintball seems to think this was perfect and without room for improvement. Don't we all get better by learning from our mistakes and the mistakes of others? That's the whole point of training. I'll mirror @gillesrenaud6926: great job under the circumstances, but there's always room for improvement.
@@idahomikeyes mistakes were made, nothing wrong with learning from it as you suggest however point 1 and 2… if you heard in the beginning as the truck was pulling out, a person was trapped on the balcony. To me that requires a sense of urgency not a walk. As for number 2, this engine uses a CAFS so traditional fire hydraulics is irrelevant. Not attempting to start an argument just encouraging a good conversation.
Nicely done. So professional, calm and confident. Amazing that there were only 4 of you for so long. Felt like so much more.
He was about 3 feet from not being able to get that hydrant without pulling a second length. LOL.
We have 2 short sections of LDH on the sides of the engine. He could have just attached a short 10 foot section if he was short
Had a little more play, that kink near the rig could have fluffed out about another foot of they had to
Bro you can drive for me anyday. Can’t believe how I was so anxious watching this. The chauffeur has soooo many things going on in the 1st 5 mins. Great job dude!! I like how you refill your booster tank after you get hydrant water. You never know when you’re gonna lose hydrant water and you got guys in there that are relying on you so great job, also to everybody watching notice how he never stops moving! He’s got his chores done and he’s throwing ladders and pulling line
Finally! Another department that actually tests/flushes taps before using them.
I know of an arson fire that destroyed an engine's pump because they didn't flush. The hydrant was filled with gravel.
@@TandD1w😳🤯😔😱😰😨😭😤😡🤬
@@TandD1w How in the world does that happen? You'll have to forgive me if this is a common occurrence, im a but a security patrol officer lmao
@Apollo55_ arsonists will sabatoge fire hydrants before lighting fires and if you dont flush it out before connecting the hose itll end up in the intake
@@Shadow-rw3bj Very interesting i didnt expect that arsonist thought so far ahead lmao arson always seemed like a crime of passion rather than a well thought out premeditated crime.
Amazing video, great for seeing the differences between engineer work with the US pumps and ours. Greetings from the Czech Republic.
It's always so amazing watching the Portage County departments work so well together!!
Was first due on a single family dwelling. No hydrant access. Narrow driveway with very little room and no way to get trucks past each other. We were getting ready to make entry when our engineer stopped us. The engine would not go into pump. He messed around for 30 sec then went to plan B. He pulled a 25 foot section of 5in and attached it to the tanker then started pumping with the tanker using the engine basically like a giant manifold. We lost maybe 2 min instead of ten if we had to move the engine and restretch lines. This then became SOP for all fires without hydrant access. We called it piggybacking. Engine plus tanker was 3500 gallons and gave us time to set up drop tanks and get a tanker shuttle going.
I dont comment on videos but this one was impressive everyone calm and collective and moving with purpose exactly how fire grounds should run as well as an engineer that knows his job nicely done brother
Thank you. We appreciate it!
@@RCFD-C-ShiftHi, was the helmet cam used a FireCam? Just want to know :)
Who’s the beast with the 3/4 boots??? Hell ya
Came here for this comment lol
I am a retired driver engineer once they pull that line and you're working off of tank water the clock is ticking get the supply line you wind up being a lifeline for them
As an Engineer, I completely agree with you. The secured water source is the Engineer's priority! This call depends on that water source. I will prepare the tools that will be needed for the firefighters for this call but my main priority is to get that water and keep watch of that pump panel. If the IC calls on the Engineer for anything, for example a deck gun or for the mayday horn, I will be right there at my engine ready to give it. My IC, captain and all my firefighters will always know that their Engineer is at that engine manning their fire pump. Even being short staffed, everyone of our firefighters is doing their job that they've trained for, just like the Engineer. Depending on the amount of water that engine is carrying, you're losing time, that's why the Engineer is tested on their ability to secure that water source right when the pump is activated. Me, personally, I had 2 minutes to secure my water source while pumping water to my crosslays before I ran out of water in my 1000 gallon tank. This was my priority!
Happy to see a local departments helmet cam!
Man, this dude was a one man band. He was doing just about everything except go inside….
Wasn’t his assigned role.
@@RCFD-C-Shift We understand that. What @johnj.staunton71 is saying is that he is being an excellent engineer.
Im 80yrs old & im amazed at the cab interior.I sat in a 1939 hook & ladder where you could see the road.🤔
It’s not a helmet cam. It’s worn on his jacket. The truck has great visibility from the front seat
You seriously thought he couldn't see the road?
@@jimbob100-d3lI’m thinking he meant he could see the road through the floorboards as they were driving.
@@CosmoMomen Flinstones style
Great video! What are the yellow handles on the console the driver is holding on to?
It’s a holder for our headsets but makes a great grab handle 🤣
Retired Police and Fire Chief here. Thank you for your service
Not enough O's in smooooth. Amazing work by a single crew.
This was awesome to watch. Everyone seemed to know exactly where to go what to do and worked together really well. Props to the engineer as well for doing so much to help out his team! Model work guys! Side note: that engine of yours looks beautiful, and it's organized so well.
Strong work by the DPO!! This should be used as a teaching video on WHAT to do as a DPO of an engine co
I also heard the 64 year old female who allegedly started the fire is being charged with aggravated arson which is a 1st degree felony in Ohio.
You have my dream job sir, thank you for your service!
My two year old grandson loves fire trucks. Thank you for this video.
Great job, with a short handed crew! Tip of the leather to your FD!
This guy is an absolute stud. Blown away. Solid work brother.
This driver reminds me of my driver from when I was running a regular shift! Such a solid driver!
Also I am loving that the rescue officer/chief (making an assumption based on the helmet) is rocking the old school 3/4 rubber boots and blue jeans!
Kudos to the driver/pump,operator. Got one line charged off booster tank, ran his own supply line, got it connected and flowing, got 2nd handling charged, set both ladders, and then made sure his guys were getting a good nozzle flow. Excellent work!!
Great pov, love getting to see different firefighter positions look like in real time as a current student :)
I remember when Andy Batch was the chief back in the 1960's. Looks like the department is still doing well at fighting fires. Watching from my ocean condo in Florida.
Strong quick work, dialed in!
Question. What was the reason for not just opening the MIV once water supply was established?
I was trying to figure that one out, too. I'm sure there was a reason, but I haven't come up with it yet.
I'm all for switching to supply but I see a few things.
- The indicator on the cab was full (or nearly) green the entire time so must not have been using much water. Truck has CAFS as the uploader has pointed out and it carries 750 gallons of water. In Part 2 they start feeding a ladder and go down 1/4 before switching to the hydrant.
- 09:55 Can see the overflow under the truck after the valve was cracked.
- You do get a bit more control of the pressures by not relying on the supply. Especially if other hydrants nearby are getting used. Again, I'd rather switch and save some wear and tear on the vehicle. Plus the obvious "hydrant fails" scenario and every bit of tank water helps.
@@idahomike The reason for this is when using CAFS {compressed air foam system} you operate at a lower pressure. typically, running off of the hydrant will over pressurize the system, so in order to deal with that, tank water is used. Some trucks are designed with that in mind and have a direct tank fill valve which will bypass the pump, and keep the tank topped off.
GREAT JOB BROTHER TONY ! DIG THE PLAN WHILE STILL IN ROUTE ! TOP SHELF WORK ! 🇺🇲
Incident Priorities:
Life Safety they thought someone was trapped so they went for the rescue first.
Incident Stabilization: Stretching at the same time as rescue and the line crew got their own water.
Excellent Job! One question why doesn't the officer have or wear an SCBA?
Cuz it makes him feel more comfy :)
Really that's all. It's a terrible idea, but white shirts do white shirt things.
Wow, you really know your steps. Good on ya. Many ignore the steps necessary to execute the role of firefighting
Great first person view of how firemen do things, we're use to seeing police officers.
ive fell down the firefighting yt rabbit hole, anyways, amazing job u guys :)
The driver is an absolute beast. King Kong of all engineers.
Is it the mic on your camera or does your engine just sound hi-pitched?
Also, nice work! I love seeing an engineer that's getting it done! Ive had a lot of lazy drivers in my day.
Thanks! Zach Thomas is wearing the camera on his jacket. The engine is that high pitched. We use CAFS so the sound is the air compressor for the foam.
@TonyTomecko22 I hope you guys post more videos. I medically retired in 2012 and enjoy watching the job
Do you not call your drivers Engineers?
Two questions. Why did you open and then close your inlet? Is that pump always that noisy. Great work too.
I noticed that too. When you switch to pump your tank you're supposed to open up the TANK TO PUMP all the way until you secure a water source then you can close it. It looked like he was opening and closing it.
Huge respect to these firefighters and all the firefighters around the world♡
Greetings from Türkiye♡
Hardest working guy on the fire ground.
bro when he went to the hydrant for a second time I heard a lady screaming at the cop tryna get her to move 😂
I subscribed before even watching 🤣 Great video ,
Same here you could already tell it was a banger from the thumbnail😂
I love the activity of the engineer. Just a question I have. Is gating down your intake a standard at your department. I have always been taught and always teach to never gate your intake down just gate your discharges.
Nice lead out with the switch to ladder. This guy is working hard
First time seeing an Fire Engineer pushing buttons, fueling water from the water hydrant and turning knobs etc. to his fire truck, usually the other firemen does that since he already did the driving to the fire scene.
Amazing. Kinda crazy how there is quite a lot of water leaking from the pump.
What’s the point of putting the attachment on the side of the hydrant, I have never understood that. Couldn’t u just leave the cap on? Not trying to critique I’m just a curious first year FF
That's to connect another supply line if needed. There is a mathematical formula you can use to figure out if there is more usable water available
I see a lot of comments of difference of opinion on the operator, its good to see an engineer moving and placing ladders but not before a adequate water supply. This is an apartment complex and water is crucial in this scenario, also there were no additional units on scene for a while so imagine if you have issues at the pump and you see your operator placing a ladder. Yes it seems lazy having a guy only at the pump be thats his job. Making sure pressures are good establishing a continues water supply protecting the guys inside. Also running on scene is a no. If he gets hurt then what? Trust your training not internet firefighters who never operated as an engineer.
I'm impressed, a million dollar pumper with 22carrot gold leaf.👍
Once you have hydrant tapped and flowing, whay not shut the tank to pump handle? I only say this as you want to have that tank as a back up in case hydrant goes haywire.
Dude's a badass! Cool video, great work! 🍻
Liked, subscribed and shared your channel and video
as they're pulling ladders out- WHERE ARE THEIR GLOVES? Chuck em' on as you're arriving on scene.
That's a badass engineer right there!
It’s gotta be just the sound quality but that pump sounds like it’s screeeaminggggg for help lol. Nice work, I’ll take a few of these little things the operator did into work with me tomorrow
The pump is making that sound due to the air compressor pushing air and foam into the hand lines. It’s normal for a CAFS engine
Helluva job by the engineer and the crew, yall on top of your shit. genuine question do yall use the foam for everything or was it just in this case? i personally haven’t seen it used in situation before.
Thank you and yes we pump foam on every fire. Our engine has CAFS and has a build in air compressor so it makes handling any size line much easier. There are tons of benefits to CAFS. The only downside is the cost to install it on an engine
that’s sick! we don’t do that anywhere around where I work, so it’s really interesting to see that. thanks for the quick response back!
Can we have a video of where and how his GoPro was mounted?!
NICE Job Driver! This guy is a pro! Bravo!
0UTSTANDING ENGINEER. Great Job,
Question: What is the engineer adjusting with the handwheel on the inlet and why (if not self explanatory)?
It's a pressure relief valve, which prevents pressure spikes from hydrant/second engine or tanker pressures from reaching the landlines used by firefighters
What was going on with the truck bogging down when you open the water tap? Does the truck have an onboard tank that it pressurizes or something?
The truck is not bogging down, that is the truck throttling down due to the increase of pressure coming in from the hydrant.
@@gp3918 The pump has an auto governor on it, when he opened the hydrant intake the engine slowed down, The old trucks you had to run the throttle with one hand while opening supply with the other to keep from knocking the nozzle man off his feet.
Question? What is the hook or box the driver holding on and touch? Thanks
It’s just a holder for our headsets
@@RCFD-C-ShiftOK
How much water do you have in that truck?
non-firefighter here with a question: would the kink in the supply line visible in the lower left at 6:03 have notables effects on the supply?
Not with the amount of water they are using, two- 1.75 lines use about 400 gpm, out of the 2000 gpm that supply line is capable of. If the engine was using everything it can then it can be an issue.
Engineer has to be in good shape to be able to do the tasks required of him when short staffed. First in engines are always short staffed.
@@timdenowh95 thanks!
Where is this? Guys are with it!
Ravenna City, Ohio
Sorry brother, that is one sloppy supply line. Gotta call it like you see it, no hydrant wrap, no cribbing, either park closer next time or you’re stuck using another stick.
@@vicstanfieldshire7754 not true. We have a 10 foot and a 25 foot extension ldh that can be used if longer distance was needed. This was the correct distance.
Did they use foam on that deck? Never seen anyone using foam in the us. Oh, and why that "Y split" on the hydrant?
We pump class A non AFFF foam on every fire using our CAFS engine. The Y was used because he couldn’t find a standard gate or ball valve.
@@RCFD-C-Shift Thank you for explaining!
Hey brother absolutely amazing hustle. I got tired watching you roll on the 🔥scene. Good shit my man 🥃
What's that yellow thing? That Driver is holding?
where is part 2?
whats the little yellow handle you are holding onto while driving?
Just a holder for the headsets
why arent we going on straight hydrant water instead of leaving the tank to pump open the whole time? is it because of the foam/cafs usage?
I'm wondering the same, once your running hydrant refill you tank and shut that off is what I have always been told and taught. That now tank that is full is used as an emergency situation only.
Why do you add the Y at the hydrant?
I feel like I’m watching the dude who does the McDonald’s POV videos, but he had a career change.
Nice work. Nice engine.
woah! is that a stortz on the hydrant???!!!! Damn if only every hydrant could be that awesome
What camera?
Nice to see an EO POV!
Salut .. terlatih dan profesional dalam bekerja .. sukses selalu ..👍🙏
Stupid question I'm sure, but what is the yellow handle the driver is holding onto?
Just a holder for our headsets
Communication is the key.
How are they controlling the lights and sirens
Lights are turned on by the monitor and siren is controlled by a pedal on the officers floor
What kind of unit are ya driving? Spartan?
Yes a 2021 spartan
@@RCFD-C-Shift sure fooled me. The panel layout and the compartments look like the Stuphen I drive. Great video man!!! Talk about an example of a damn good engineer.
Does a gopro actually survive the heat of the fire? 😮
Calm and cool.... i dont mean to judge, but from the wear and tear on the equipment ( hose lines, turnout gear, ) it doesn't appear this is a normal situation... either way.. well done.. keep calm and go to work
I came in my pants when the Q sounded up for the first time
The f…
@@evanblackburn6173😂😂😂😂😂😂
Does anyone know what type of mount he is using with the gopro?
what apparatus is that? Mainly what year?
2021 Custom Spartan
facebook.com/share/Qke1WHtbfNAdz7JG/?mibextid=WC7FNe
Why are we pumping in RPM?
@@spencersaul2086 it was not pumped in RPM
@ ah ok. Our controllers only show engine RPMs when it’s being pumped in RPM mode.
What brand pump is that it sounds horrible.
Spartan. That sound is the air compressor since it’s a CAFS engine. Completely normal sound.
@@RCFD-C-Shift Oh okay that makes sense.
What is this device 4:12 used for?
That allows for 2 other engines to refill at the same time
@@TrentonSkinner-tc6xk Thank you.
What helmet cam is this
GoPro
Why does that pump/truck sound like there’s something wrong with it?
@@gunney74 it’s a CAFS engine. It’s normal. The sound you’re hearing is the onboard air compressor.
Great Engineer! Nothing else to say except probies watch and learn. 😊
Smart thinking throwing the gated wye on before charging the hydrant. Things my probie ass would never think of til afterwards
wait.... since when does the US havbe the STORZ coupling ?
@@niklas8413 storz are very common here. At least in northeast Ohio
This is sooooooooooo badass.. I’m DRAWN
Son wants to know what the yellow hook like thing he was holding while driving is & what it is for.
It’s just a holder for our headsets
Love the hustle.
What does the stuff hes holding onto with his right hand do? the sirens?
Just a holder for our headsets. He’s just holding it while driving. It doesn’t do anything
What the Handel for tue q siren