STRANGEST V8 Engine Ever Made
HTML-код
- Опубликовано: 21 авг 2024
- Dieter Hartmann-Wirthwein patented a system in which four cylinders operate using only one single connecting rod. This allows all four pistons to work as a single mechanical assembly, which transmits power to the crankshaft via a single connecting rod on a single crankpin
He's a professional upstairs neighbor
He can become a master if he find a way to repeatly lift the engine and drop it on the floor several times per second somewhere around 10pm and 5am
@@paolo69he can take lessons from my upstairs neighbors
Brilliant reply.
Yo is my upstairs neighbor is self-designing and machining engines, he can make all the noise he wants as long as he let's me gush over his work
He redefined professional neighbor.
Get this man a garage
#1 comment
"Drops the Mic'..."👏👏👏
Amennn !!! ! !!! Asap !!! ! !!!
*But 1st, he needs a wheelchair*
Man’s dead 😭
Guy trying to figure out how to power his wheelchair with this engine.
Bro💀
Used by Stephen Hawking to get to Epstein’s island.
happy wheels
😂😂😂😂
1,500th like, that’s neat.
It's definitely a unique sound
Sounds like Shrek blowing his nose😂
my boy doofinshmirtz
be building the noisynator
😂😂😂😂 didn’t expect it. But that was perfect
Pi$$ funny mate 😆😂🤣👏👏
This will help lower housing values throughout the entire TRISTATE AREA!!
Hey at least it doesn't have a ray, creating a 70' tall " PERRY " !!!
Who else sang “doofinshmirtz incorporated” in their head after reading this comment.. it’s stuck in your head now isn’t it? You’re welcome
That’s got to be one helluva connecting rod.
Right.... lol looking at the first wrist pin I see it breaking preme because of the double movement side to side plus up and down
Maybe that rod is made of unobtainium!
@@xclife211oh no if it goes in two directions it's doomed! Nah, they look plenty sturdy for what is really a "low horsepower" show mod.
@@xclife211 If it's properly balanced, wobble won't be an issue.
@@EldeNicewait until the bearings wear
He came up with the design, but how was he able to make all of the custom parts to go inside it. It's quite impressive. I don't think people understand just how hard that is.
I would guess if he isn't a machinist, he probably sent over the designs and had them built by a nearby machinist.
You just know deep inside he wants to install that on his wheelchair 😂😂😂
Meanwhile in an alternate reality, he did and now goes over 100 MPH from the HP to weight ratio💀
Pretty sure he's not in a wheelchair lol how the heck do u think he built it if he can't walk lol he's sitting on a porch chair
Bruh with people ik hit rock bottom . If there is a will there is a way
That rod is stronger than my will to live
Carbon fiber
At least your will to live is stronger than Padme's will to live
@@Day_Reezy This guy purchased her right to live
So... not strong?
That holds true even if you're the world's happiest person.
His beef against the neighbors fueled the motivation to build
BraienAndy ???
Hey man that old man is living the best life he can live. Hopefully no one bugs him about the engine
The engine design in a way resembles a radial aircraft engine. The engine has one master rod and the other pistons are connected or hinged to it with linkage.
You're right but radial engines are actually decent. There's a big difference
He is an German Engineer, who suffered from a terrible accident .. He and his Wife Then made their House Wheelchairfriendly Witz all the Equipment needed, to still follow his Passion … Please dont hate him … I live in the Same Village as him, and everybody in his neighbourhood knows his Passion and what Happend to him … 0 Complaints about Noise, because he rarely lets the Engine acutally run. Thank you for sharing this Video!
Greetings from germany (South Hessen, Odenwald)
I don't hate the guy at all. I just wonder what awesome, real engine he could have made, instead of fooling around with this.
@Vais_77 - thank you for posting this, more people needs to see this man's passion. What do you think would the odds be of him wanting to post on RUclips? ❤
don’t worry mate the comments about the noise are all jokes
Oh I definitely understand my late father who was also a engineer (Computer Software) even when his health was failing he was almost always tinkering with something.
It's just the way us engineers are at having fun.
Nobody (here) hates him. Dude just needs a garage.
He clearly is talented
Fires it up on the balcony of his condo, like a boss.
And revs the sht out of it repeatedly while facing the exhaust directly at someone’s window. 🤣
@@richardbaker_0086 , like a boss.
Like a big bad boss !!
Yea , like a big bad boss !
I know right😎 nobody wants to be the one to shut him down💪✊️
That would be the one perfect sound effect for Cruella De-Vil’s Car that has a 60L VR8 Engine
A lot better way to spend your spare time than play station.
and at about 4000 rpm that thing would rapidly disassemble itself.
It idles at 20,000 RPM
@@kevinroberts781riiiight
That's an innacurate assumption as it's been dyno tested well over 4000 rpm, which is how they got the HP rating.
@@EAMitchstill a useless piece.
A just for fun project.
@Dom it's not useless. It's just not any more powerful than the original engine it was based on. It does have less moving parts though and therefore may actually be more reliable
I wouldn't expect anything less from a man named Dieter.
As a German this made me laugh
As a Jew this made me cry
@@polito-yd8fp why?
@@polito-yd8fp again, why?
@@polito-yd8fp nothing new
How to shatter a piston rod instantly:
CONNECTING ROD
@@pantelisvidakis9005 It can be either, from what I’ve seen it’s just “rod”
@@pantelisvidakis9005 we know what he means
As a professional mechanic- I can confirm this man is a gear head. Someone start a GofundMe and let’s get this man his own shop
That ran WAY better than I expected
hes a guy in a wheelchair making motorcycle engines what did you expect this guys lore is probably so complex and deep
Seems like it would want to rev no problem as you arent slinging a bunch of rotational weight. But i wager rebuilds are requires on a strict basis. :)
Anyone know what the name of the guy is?
@@taylordurden8470 That would be Dieter Hartmann-Wirthwein
@@PuchMaxi tysm I’ve waited too see this for a reply for some time lol. Thanks again
Everyone should get a motor for their balcony.
Have a competition, get a sound meter.
I'm from Mississippi and we do this twice a year
This engine is engineered by someone who has to have been snorting coke. 4 pistons, one piston rod 😂
I'm from Brisbane Australia and we do this every New Years Eve.
😭😭
I’m from Alabama and we do this every month. Dale’s in the lead this month. He put his 350 Chevy (from his square body he wrecked from drunk driving) on his front porch.
You could really strengthen that by having 4 rods that connect to the outside piston.
The only reason it "deafens everyone in the local neighborhood" is because of using the straight pipes shown, instead of incorporating mufflers.
That's an addictive engine note.
Just don’t blip it too far off idle. The piston pivots will make scrunching note 😂
Sounds like a strimmer
Sounds like it’s just coming in to power
Dude it sounds like a leaf blower
Not if you are his neighbor.
As a computer programmer, I can kind of relate. Sometimes it's fun to build something even if it's not that useful just to prove that you can do it.
👍
Make a russian roulette game where if u dont choose the correct number (rng), byebye System32
I feel like thats crystlers whole shtick.
Yes a while back I did an engine swap that a lot of people said could not be done.. Also that I would never be able to make it run..
Still today I'm driving the only 2.2l chevrolet aveo that I know of 🤣
It's pointless it's noisy and it's stupid fast
Why not 😎
🙄
This has given me a greater appreciation of my neighbors who don’t have their pet engineering projects disturbing the peace on their balconies.
That poor cam. What a dishonor done to such a noble part.
Just because you can...you definitely should.
Best thing I've read in a while. Lol
Yes
We do what we must, because we can.
@@selmiravdic4798 for the good of all of us...
nt
They told him he could not BBQ on his balcony, he decided to show them there are worse things you can do.
He built that at home, that is impressive in it's self, never mind the designing something completely different aspect.
Everyone hates such a neighbor, and rightly so.
@@aliceeliot6389 100%, noisy neighbours are the absolute worst. I'm on the verge of beating mine with a baseball bat.
000000хх0000000000000ххх😊
@@I_Crit_My_Pantsmaybe, but these, which complain that often about noise, are often the noisiest themselves. But that is totally (!) different, they have "legitimate" reasons...
There is no way he built that at home, maybe assembled it or something, but that probably came from work after they laughed at the design and told him he could take it home with him when he retired.
An engine interlinked, interlinked. The pistons are interlinked, interlinked
within cells interlinked.
Now thats a real V8 engine
That's a great statue.
Everyman needs an engine on his balcony to rev up first thing before sunrise 😅
I just got done building a fully blown 572 for my one bedroom apartment on the 17th floor
😂 Fr
WAKE UP BITCHES!!!
😂😂😂
statue?
Can I have a W16 varient
Dudes on the balcony with 1 crank, 8 pistons and 2 rods like hold my beers I can make a v8 outta that
“We broke 6 rods, how tf are we competing tomorrow?” “I know a guy”
Garage ❌
2nd story Balcony in neighborhood ✅
“Yeah this puppy revs to 1000 rpm, and produces 5 horsepower. Turns gasoline into noise”
my man gave the connecting rods two rocker arms
Came here to look for this comment
This would decrease rotational mass allowing the engine to rev more freely which should increase horsepower.
@@chrislangdon547370 hp 52cubic Inch, that’s pretty impressive
The bearings in those rocker arms won't last though. Too much force on something that doesn't undergo hydrodynamic lubrication.
@@ryelor123I'd be adding some oil galleries to keep them fed for sure.
V8 with 70hp? Sign me up
It's only 55 cu in they said.
That's only 70 less hp than my 78 camaro came with. Those were dark days...
youtube made me rate your comment 😂
@@_BaguetteDoggo did you give it a V8 out of a V10?
@@don2deliver 😂 v10/v10
if he had a shop he’d be unstoppable
Interlinked "interlinked" *bladerunner theme starts playing*
Crankshaft geometry left the chat
That's some crazy throttle response!!
Yeah since it kinda skip the lull in up stroke as it being driven up by the power stroke of the piston, as opposed of being pushed up by the crankshaft of the conventional 4 strokes.
Being driven both up and down by explosion would create those crazy quick throttle response
@@messeduplad I would imagine it'd have more to do with the lower rotating mass and lower moment of inertia. Those rocker arms are probably weigh less and definitely move less and move slower than connecting rods would.
@@christopherrto yeah that's definitely contribute too. Is of many factors
I would think that the opposing two cylinders would be on the opposite XD part of the cycle. So when onebank is on the power strike the outside cylinders would by pushing up on the compressing pistons would free up the power strike the gi to the crank and not lose any to compression abd depending on how much the they pull on the connecting rod should help with the power strike by the pulling on the crank journal.
@@messeduplad this is interesting
Biblically accurate ICE. 🔥🔥🔥
interlinked, all four pistons, interlinked, one crankshaft, interlinked
If you haven't got neighbours like this then you are most likely that neighbour
I got a civic😆
Im absolutely that guy
I'm not noisy but my neighbors get pissed when I work on a vehicle in my driveway. A bunch of Karen's and their cuck husbands on all sides
Shit…
i know i’m that neighbor i got 3 loud ass v8’s in my front yard🫡🫡
He jus got that shit on the back porch, sharing his joy with the whole neighborhood 👍👍👍👌
That's not a porch, it's a balcony in a block of flats, second or third floor judging by the height.
Weird but great he’s got the timing right in this design
Neighbor: "Who just started the building up?"
That motor is screaming, "please kill me, I am in terrible pain".
The opposite actually
What do you know 😂
OP is an EV driver
@@Shadows-RC Ah, yes! There's the comment I was looking for.
Nina in Full Metal Alchemist
I love how he has it set up on his 3rd story balcony, like it’s a table or some shit 😂
Ikea sells kits
I love that he has it on a stand on his third floor porch but I really hopes he puts that in something
The life of that engine no matter what lubricant you use is half of a normal one
I would be a neighbor that would like to check it out.
You and me both
Same, if i suddenly heard something like this or some jet engine in my neighborhood im searching for it and watching
@@Andre_Thomasson exactly!
I am out looking for that one for sure
Me too, interesting shit.
Ya, the first time. It may get old if it became more frequent. But either way, you have to give that OG credit for building an engine in his second floor home.
Deter is the kind of guy with more than one carburetor soaking in his kitchen sink.
well he created a needlessly complex 4 cylinder if you think about it.
Wait, that actually is pretty smart. The center of mass from the combustion would be so focused that it could push more power.
Cool to see someone trying new designs for internal combustion engines.
Have you heard of the roton head for the k series 1.8 it was squashed by British gov ..said to produce 600 horses
@@dailyallowance3826 It wasnt squashed by the gov, they never produced anything anything that was reliable and able to be produced at scale. Several other companies have tried rotary valve trains, the issues are getting a reliable seal is a nightmare, as soon as they get any kind of carbon build-up they seize up.
Freevalve technology has better and much more durable results but it is far too expensive for mass production hence it only being in a few hypercar engines and some very one off home builds.
bbc when a guy thinks he invents somehting new and it doesn't work he blames the government@@dailyallowance3826
@@tothethreshold.9965Freevalve is just konigsegg and I think it’s not even out yet. It was supposed to be out like 2015 but it keeps getting pushed back because it’s too complicated for the computer
"Yo dawg! I heard you like rockers and connecting rods, so I put connecting rods on your rockers and connected to them your connecting rods so your pistons can be rocking and cranking!"
He’s in a wheelchair, dang dude, I wish him the best.
Imagine if this man is your neighbour and he fire that engine every morning.
I would show him another cool piece of engineering. My handgun.
@@SammyGDude I’m dying 😂😂
It wouldn't be any worse than yhe guy down thestreet that rides his Harley ip and down the block add naseum
@@SammyGDude hahahaha sit down
@@qwertykirky lol
It appears that the energy of the power stoke from the outer two pistons only contributes to the compression stoke of the inner two pistons and not to the crankshaft power. This means that the engine performance is essentially the same as a basic 4 cylinder, but with the compilation of added mass, friction and components. Looks neat, but I don't see any benefit
exactly what i was thinking. The 4 side pistons only work to accelerate the middle pistons and the fireing order has to be a nightmare
Exactly what I was thinking but the outer two pistons are contributing to engine power by providing upward torque to the crank. Instead of the compression stroke being a parasitic drag it contributes torque. Kinda like a two stroke engine.
@@n2osrt4its closer to the power output of a steam engine, pushing and pulling
@@isekawai the firing order would probably be the same as a standard inline 4, combined with a v-twin engine
@@Sausketo It's basically like flatplane V8, with a slightly better ballance.
He’s gonna do that until someone has enough💀
nice thing about this design...you have power on not only the down stroke but also on the up stroke.
It's incredible that one man could build something like that. This guy is a genius!🤘👏
It is not.
@@Orangnus says a guy who hasn't designed and built his own engine...
@@andyhillhouse9813 I will elaborate. Engines aren't rocket science, just engineering. Being a somewhat competent engineer doesn't take a genius. What the guy has built here is as effective as an overcomplicated V2. He has taken away what makes a V8 so great; every piston being able to turn the crankshaft. Here you only have two things turning the crankshaft. This is a stupid design.
@@Orangnus*genius. You had a typo.
@@johannesbraun4283 It is fixed.
He got tired of hearing his neighbors playing loud Rap music ..
So he built this .
Those rods gotta be crazy strong
His neighbours will hate him to the core
Awww bless him, when I use to do my rounds in the community a community base nurse, I had an old gentel man who build a fully functioning "vespa" mod it 1960s style with 20 plus mirrors complete with multiple union jack flags on his balcony. There was no way to get the bike out of the balcony without dismantling it. He use to ride until his condition of muscle dystrophy, worsen. It was wholesome where he lived the neighbours would watch him build it and on days when he is weak they all cheer him on to carry on n that he can finish it. He finished the project but sadly died a year later due to complications of his ailment.
Truelly a strong will man, I forgot his surname but his first name was Rob. May he rest in peace n ride till the end of time.
Beauty story man, wud u be a Pommie sir? Greets fr NZ
Nice, things like that make life more worth living.
That's such a sweet story.
The outside pistons don't contribute to power
That's an incredible design!!
Not really, just increases friction, and is an inefficient way to transfer energy from the cylinders.
To witness that level engineering skills, it'd be worth going deaf! Genius
Those need to be some very strong rod caps lol
It does sound wicked and revs up very quickly. Interesting.
Not sure if thats a good thing or not. Personally i dont like my vechicles having high rpms for the same speed at lower rpms can achieve. Only fun part is the quick vroom.
upstairs neighbors are usually really loud in the building I live in. haven't noticed since I moved to the top floor. finally peace and quiet.
No home is complete without a fully functioning V8 on the balcony.
I love this kind of thinking outside of the box experimentation. We need more of this.
That thing sounds awesome, I just love that little whine it has.
😂 Go out for a smoke, ABSOLUTELY PISS EVERY neighbor off. 😂 I like this guy.
It’s honestly a bad ass design I like it
That's very quiet actually
No louder than smartphone speaker I guess
You can never tell how loud something actually is on a mere audio recording.
@@paulhope3401 damn, you must be the best in captain obvious class
@Julius Doerwald ...but not as good as you. ;)
Okay. So the basic idea is that something can be too loud for a microphone and basically makes the mic deaf when the noise hits it and then played back really doesn’t matter unless it’s your phone speaker. Any headphones will let you hear what the microphone could manage in its crippled state. That’s why it sounds quiet but it’s actually just too loud to hear.
Ahh the youtube genius mechanics have assembled in the chat.
The outer cylinders do absolutely nothing because that down stroke quite literally is pointless but none of that angular energy is translated into circular motion
@@happytrails5342 False. When the outer pistons are pushing down they are pulling the connecting rod up. Traditional engines only produce power on the downstroke, this produces power on both down and up strokes (of the connecting rod).
It's just awesome and kind that he can live with his passion while he has had a crash and got paralyzed 😢
that shit is wild for a small engine like that
That transition was super smooth
I hate how they just repeat the same thing instead of ending the video.
For anyone else wondering, 52 cubic inches is about 850cc
850 CC is not a lot of displacement. Hondas l
L12B seen in the Honda jazz in 2008 produces 90 horsepower with a 1.2L (1200CC) engine.
@@Quindarious_Gooch_ it is pretty big for a motorcycle engine. I have a 1990s Honda Hornet which produces around 100hp from 600cc, and that is not exactly a fast bike.
@@patrickmkivyou can’t put that size on a bike. But I understand what he wanted to do. The engine is not for car or production, it was a fun project so it’s understandable.
@@boxoffisano, it doesn’t seem to have any practical purpose, but it is made from 2 Ducati bike engines.
@@patrickmkiv wow. That’s impressive. I didn’t get it at first. Now I get the whole picture and what you were talking about. Making it from Ducati engine is awesome. Hopefully he makes more stuff like that and get posted.
That’s nuts. All that power lost going through the linkage
Computer: "Pistons Interlinked"
Netrunner: "Interlinked"
When your to lazy to annoy your neighbors from your garage 😂
Well, he’s in a wheelchair
Sounds nice and smooth.
Interlinked. Cells interlinked.
BRINGING THE TERM NOISY NEIGHBOR TO A WHOLE NEW LEVEL. 👍👍
INSANE throttle resonse though...
What happens when you have any engine not attached to a drive train
@@XxSTARMeRcYX That doesn't mean anything because input shaft spins freely in neutral..
If I were his neighbor, we'd put that in a bike, not just on the balcony.
Go kart
Lawnmower*
@@SanguisNoxify Honda
@GrandmasterAliMoto Guzzi did it.
Also this guy did a four cylinder proof of concept fitted to a monkey bike.
@GrandmasterAliviper v10 bike believe it pal 😂
dawg thats a dope design looks like there less parts to fail
man’s just turned a v8 into a v4
It’s basically a V2 in terms of balance
the outer pistons pull the crankshaft up rather than pushing it down like in conventional engines. i wonder if this smooths out the torque output on smaller engines like a i4
The amount of straight force on that one piston arm is crazy bro
imagine being neighbors with this guy
It sure sounds smooth!
Tutorial of how to wake your whole neighborhood