Doom Metal Pedalboard: Effects And Pedal Order

Поделиться
HTML-код

Комментарии • 98

  • @bluepedalsrock9271
    @bluepedalsrock9271 27 дней назад +1

    I think a “using reverb/delay in a doom metal context” video from you would be awesome. 🤘

  • @imrn
    @imrn 3 месяца назад +6

    I just recently downsized my board to 5 pedals in the following seq:
    1) EHX Flatiron Fuzz;
    2) Way Huge Swollen Pickle mk3;
    3) EQD Tentacles;
    4) ZOOM MS-70 CDr
    5) Keeley ECCOS
    Running in stereo!
    Its all there, fuzz gain stacking, octave mayhem, tuner n tonsof rev n mods from the ZOOM, and looping + mod tape delays from the ECCOS

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад +2

      Stereo rigs are so rad! Thanks for watching 🙏

  • @DuncanTyler
    @DuncanTyler 3 месяца назад +4

    Tuner mid chain to mute noisy fuzz pedals - why the heck didn't I think of that! Genius tip - ta!

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад +2

      Glad you dig thag one! It’s a super helpful trick I always like to share with folks ✨

  • @Cara-Calico
    @Cara-Calico 3 месяца назад +6

    I know the video is all about pedals but i cant not mention how fucking badass your new guitar is :)

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад +1

      Thank you! It was built by Partscaster Concierge and it’s an amazing guitar 🧙

  • @jameyharrison7499
    @jameyharrison7499 3 месяца назад +3

    Thank you for doing an updated version 🤙🏼

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад

      Thanks for watching!!! Any other old videos you’d like to see updated?

  • @josephguillermo3007
    @josephguillermo3007 3 месяца назад +7

    My board has a Dunlop Original Crybaby wah, Behringer Super Fuzz SF 300, Amazon Basic Boost, Lyon Distortion, Boss Metal Zone MT-2, Digitech The Weapon ( set on the sitar setting), Boss BF-2 Flanger, Boss PH-3 Phase Shifter, Boss TR-2 Tremolo, Behringer Digital Delay DD400, DOD Echo FX Analog Delay, Mooer Pitchbox, and last is the Boss CS-3 Compression Sustainer.

  • @SpaceWizardAcademy
    @SpaceWizardAcademy 3 месяца назад +1

    Ok, my rig is pretty complex, so follow along on this wet/dry/wet adventure:
    Guitar into Ibanez Screaming Demon wha-wha, into Big Muff Ram's Head, into Korg tuner, into NUX Horseman overdrive, into buffer, into Neon FX tri-paralel mixer.
    CH1 of mixer to Fender Champ for dry
    CH2 of mixer to LEFT input of TC Electronics Plethora X5, LEFT output to Orange Crush Mini running a 1x12 cabinet
    CH3 of mixer to RIGHT input of Plethora X5, Right output to Fender Super 210
    I have a Realistic 10 Band stereo EQ in the FX loop of the Plethora X5

  • @gringogreen4719
    @gringogreen4719 3 месяца назад +1

    Thank you for this video Jason. I am thinking of putting together a Doomgaze board and marrying the Doom Fuzz with the ethereal Reverbs of Shoegaze so this video definitely helped me out in narrowing down what pedals I want for that.
    My Main Board is my "Do Everything Board" for the Genres and Subgenres I like to play. I am an old school fan of Danelectro pedals so I have a few on my board. My main effects are Dirt, Reverb, and Echo/Delay. Here is my pedal layout.
    My board is a Gator Extra Large green board with two Gator Bricks (an 8 spot and a 5 spot) for power. In addition to those the milliamp draw on two pedals exceeds the bricks so two pedals require wall warts. I have all of these running into a power strip (so it just one cable underneath the board so out of sight) and I have an LED light strip under the board. My pedals run in the following order:
    Boss TU-3, Ibanez Tubescreamer Mini, ProCo Rat 2*, EHX Big Muff Pi*, Danelectro Cool Cat Chorus (18 volt model), Danelectro Dan Echo* (Slap Back setting), Danelectro Dan Echo* (Spacey setting), EHX Oceans 11 (mainly for Shimmer but does other things), Source Audio True Spring (mainly Surf style reverb), Orion Effekt Kafka (dark echo), Ibanez Echoshifter, Walrus Audio Slo (I use these to play around with on the fly as noisemakers and ethereal settings).
    *Means pedals was modified by Alchemy Audio.
    I cover a lot of genres but my wheelhouse is mainly Punk, Alt Country, and Garage Rock. I was over the moon when I found out my Dirt pedals covered Doom as well. The order is mainly to get the most out of placement and for this to be able to get Shoegaze and Dream Pop sounds too. Some pedals are meant more as a stand alone rather then a chain of 2-4 pedals for a.certain sound. I do want to get one more Reverb, an Oceans 3 (for both function and space) and put it in-between the TU3 and the Tubescreamer (it's the only Shoegaze formula that isn't covered on this yet for a Plate Reverb before Dirt sound). I'm very happy and the board is super clean with the power wires hid beneath the board and tidied up with zip ties and anchors. There is enough real estate on the board that it is convenient to turn on all pedals as they are not super crowded. Besides the size the only downsize of this board is that it weighs as much as the amp it is running into, a Roland JC 120. That said the tones are EXACTLY what I have been looking for.
    I have two other pedal boards (my OG Rockabilly/Psychobilly board and my budget Garage Rock board I put on a skateboard deck).
    For the Doomgaze Board I have at least one pedal that will go on it, a DOD Carcosa Fuzz. I want to get a Fuzzlord FET120 and probably some sort of Tubescreamer ahead of both of these. For Reverb I am thinking of a Soft Focus as well as an Afterneath pedal to put before and behind the Dirt pedals. Probably an EHX Canyon for Echo. That said it's still theoretical at this point and I am trying to avoid a repeat of my main board (even though it can Doomgaze as well). All other effects I really don't touch all that much.
    Again, great video.😎👍✨

  • @colewmiddleton
    @colewmiddleton 3 месяца назад +1

    Peterson Strobe, Lovepedal Valve Reamer, JPTR FX Warlow, Behringer Vintage Delay, Morley Emerald Echo. Appreciate the input you provide on these videos!

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад

      Have always wanted one of those tuners and thanks for watching and commenting! 🙏

  • @ikestoddard2458
    @ikestoddard2458 3 месяца назад +4

    Jason, this was the most helpful video you have put out in at least three months. THANK YOU. If my guitar is in the same tuning as yours, the Fuzzlord Drone Master is the only other one I need. (I have a Hizumitas to do modern stuff, and an old Shin-Ei to do the Cream/Hendrix tones.) Cheers!

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад +1

      Hey Ike I am so happy to hear this was a helpful video! Will do my best to keep these ones coming out regularly!

  • @colincain2224
    @colincain2224 3 месяца назад +2

    1) Dimebag wah
    2) Boss Tuner
    3) Revv /G8 noise gate
    4) earthquaker The Warden
    5) Fuzzlord Doom Screamer
    6) D.I.D Baghdad
    7) Big Muff Rams Head
    8) Boss Chorus CE-2
    9) D.I.D Doomcaster

  • @rickileesinn3944
    @rickileesinn3944 3 месяца назад

    Current Board:
    Cry Baby Jr > Green Screamer > Swollen Pickle MKII > Magus Pro > Heavy Menace > Gauss Tape Echo > Rowin Tuner > Amp
    Then:
    FX Send > MXR 10 Band EQ > Reverb > FX Return.
    Also, slowly but surely working on Fuzzlord board. So far, I have the Doom Screamer, the MF-4, and the Void Master.

  • @off6848
    @off6848 3 месяца назад +1

    EQD Hoof fuzz and an HM-2 set like a tube screamer with distortion at 0 and level up if you’ve lost your mind

  • @nicholasrella6904
    @nicholasrella6904 3 месяца назад

    My go to doom combo is Black Arts Pharoah into MXR Fullbore. I can build any sound I want around those two. I put a higher gain fuzz in front of the Pharoah. Usually an Abominable Demon Lung or Spaceman Sputnik. A lower gain overdrive or boost can go after the Fullbore if desired. Modulation and time based effects after. Strymon Mobius, Timeline, Empress Reverb, Neunaber Immerse. I usually stick to just the gain pedals when playing Doom or any kind of metal. Once I start adding the other stuff I end up playing ambient music.

  • @taylormoon3561
    @taylormoon3561 3 месяца назад +3

    Running a Hotone volume/wah, mxr poly blue octave, diy semi-parametric EQ, klon, then my main dirt pedals are either a metal zone or a rat, then either a EQD Hizumitas or a DOD carcosa. For reverb I use a walrus Slö and for delay I’m using a source audio nemesis which has a pretty good space echo setting. All of this running into my Orange thunderverb

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад +1

      Metal zone is so underrated! Thanks for watching Taylor!

  • @flaminx0r
    @flaminx0r 3 месяца назад +1

    Great video!
    My pedals in order, but I'm never totally satisfied with the order, any advice or tips appreciated!
    Guitar (baritone) ->
    Keeley Compressor + ->
    Earthquaker The Depths ->
    MXR Super Badass Variac Fuzz ->
    Big Muff NYC ->
    Earthquaker Afterneath ->
    MXR Carbon Copy ->
    Digitech Polara ->
    Amps (Orange Crush for home / Behringer GMX212 for larger spaces)

  • @PearlJamaholic
    @PearlJamaholic 2 месяца назад

    My pedal board is absurd, I need to streamline this, but I end up always adding instead.
    Black Mountain Volume > (TU-2) > Dan-Echo > JHS Bonsai > Tumnus > (Boss NS-2 > Muffuletta > SF300 Super Fuzz > Lizard Queen > Hendrix Wah > DS-1) > Dan-Electro Spinning Speaker > EHX Mod 11> JHS Spring Tank (UV300 Vibrato in the reverb trails) > Lucky Cat Delay > JHS Octave Reverb > DD-5 (Stereo Output > Stereo Input) White Tape Delay > (Stereo Output 1 > Holy Grail Reverb > Bassman 59) Stereo Output 2 > Orange Crush 20RT
    As much as I like the JHS Ocatve Reverb, the Spectral Realm looks like a solid replacement, and I really want a FuzzLord pedal on my board.

  • @clairvoyant.9042
    @clairvoyant.9042 2 месяца назад

    current board set up is a big muff tone wicker, catalinbread csidman for some crazy droney, glitchy delay stuff, the dunlop crybaby from hell wah, a behringer ultra vibrato (looking to replace w a chorus soon) and a classic HM-2. crunchy, glitchy noisy goodness all round

  • @christopherkennedy873
    @christopherkennedy873 3 месяца назад +3

    Stone Deaf PDF 1X
    Does it Doom"Agartha"
    Fuzzlord FET120
    (all in parallel loops through the EHX Tri Parallel Mixer)
    in the FX loop of amp:
    DemonFX "ravine"
    TC Sentry gate (not really using it much)
    (into a Quilter tone block 201 & 212cab)
    🤘🎸💥

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад +1

      Damn that is a badass setup!! I’ve always wanted to try out a quilter, have heard only good things about them

    • @christopherkennedy873
      @christopherkennedy873 3 месяца назад

      @@FuzzlordEffects They're really great pedal platforms ( this one is 200watts @4ohms(?)
      Anyway - got inspired by your latest vids to put that FET120 back on the board - totally what was missing! 🤘💀💥

  • @oddoutdoors
    @oddoutdoors 2 месяца назад

    My new setup is the monoprice tuner, joyo 808 clone, sound cake reverb, rowin nous gate. Run through a krank rev jr 20.

  • @Margilio5150
    @Margilio5150 3 месяца назад

    I don’t usually play doom but I put my Hizumitas with an HM2 in front which I use directly into an IR Loader with a Vintage 60s Fender Super Reverb 4x10 Cab Sim

  • @erikberg8352
    @erikberg8352 3 месяца назад

    A work in progress, I'm going for a base rhythm tone like Celtic Frost and a variety of lead tones. The dirty channel on the amp is the rhythm tone, hence the EQ pedal after the pre-amp:
    Tuner-->Star Eater fuzz-->Grand Orbiter phaser-->Widow Maker distortion-->Belle Epoch delay-->noise gate-->Orange Super Crush 120-->7 band EQ-->Ecolution 2 delay-->Afterneath reverb

  • @MrDonc78
    @MrDonc78 3 месяца назад

    I have the life pedal V1. It's a workhorse because it sounds good on everything. That said, I get a way more aggressive tone with the fender Sheilds Blender and it's cheaper used too!

  • @josephguillermo3007
    @josephguillermo3007 3 месяца назад +2

    Bleed me an ocean!

  • @derekmonaco6132
    @derekmonaco6132 2 месяца назад +1

    Purple Tolex DID board. Voodoo lab power. Tuner Korg-
    Beam Splitter OBNE:
    1st channel- Space Echo BOSS
    2nd Channel- Phase 100 MXR- Hail Satan AE- Dark Master FE- Doom Dweller FE- Doomcaster DID.
    3rd Channel - Somersault Caroline- Microdream DBA- Dispatch Master EQD- Ditto TCE.
    3 amps = Sonic Bliss

  • @baileywatts1304
    @baileywatts1304 3 месяца назад +1

    I run a Walrus Kangra (octave doubling fuzz wah), into an ibanez super chorus, into a FET120, to a Peavey Bandit 112.

  • @DOOMZDAY_MEDIA_GROUP
    @DOOMZDAY_MEDIA_GROUP 3 месяца назад +1

    Great video Jason 🤘🏼💀

  • @ushnicyuvnikof2748
    @ushnicyuvnikof2748 2 месяца назад +1

    Tremolo is used a lot more than chorus (90+% of Stoner rock has trem and a LOT of doom too), after all other modulation but before delay and reverb works placement wise. Tremolo needs to be mentioned more, infact you can even boot a phase 90 off your boad and run a trem and a wah.

    • @FuzzlordEffects
      @FuzzlordEffects  2 месяца назад

      Nah 🌭

    • @Harzurner
      @Harzurner 2 месяца назад

      TREM CREW ASSEMBLE! My bluesy Doom board consists of threes trems, a rams head and a delay.

    • @Deatg-ek8rf
      @Deatg-ek8rf 2 месяца назад

      All the TremOmaniacs from around the world 🌎 we hear you brother

    • @ushnicyuvnikof2748
      @ushnicyuvnikof2748 2 месяца назад +1

      @@FuzzlordEffects What you guna do when TremOmania runs wild on you brother

  • @travis43
    @travis43 3 месяца назад +1

    My board: gtr-boss tuner- digitech drop - boss tremolo - modtone analog delay - boss ir2 - EHX magnum 44 - 4x12 cab
    Ir2 has cab sim off
    More of a rock than doom, but the drop can get me down low to doom it up

  • @PhantomRascal
    @PhantomRascal 3 месяца назад +1

    my doom board is a
    cry baby wah, EQD life pedal clone, Superfuzz, heathencraft blood muff (mid boosted ramshead+rangemaster treble booster+green ringer, BOSS PH-1, boss chorus, Boss DD3, OBNE darkstar reverb

  • @chupiconverge6034
    @chupiconverge6034 3 месяца назад

    Excellent 👌🏿

  • @MetalHeadHippie
    @MetalHeadHippie 2 месяца назад

    Yeah Buddy.. 💥BOOM💥

  • @mikerauter1859
    @mikerauter1859 3 месяца назад +1

    cool Acid Bath riffing Jason. please bring back the FTW666

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад +1

      Thanks man cheers! I’ll see what I can do, maybe a super short run in a few months. Would be fun to bring back a few of the older discontinued pedals

    • @mikerauter1859
      @mikerauter1859 3 месяца назад

      @@FuzzlordEffects to me the 666 was your best sounding in that vein

  • @clairvoyant.9042
    @clairvoyant.9042 2 месяца назад +3

    2:58 LET THE BLACKNESSS ROLLL

  • @matthewlewis8106
    @matthewlewis8106 3 месяца назад +1

    Excellent video, clear and concise, love it! What're your thoughts on compressor pedals. Especially for adding sustain. Worth it, or use something else?

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад

      I use them in post production a lot but have never had one on my board but have a feeling they would be really helpful with fuzz and distortion. I’d probably run them before dirt since after the dirt pedals the signal is already super compressed anyway.

  • @kicsisziszi
    @kicsisziszi 3 месяца назад +1

    First time I have seen a transparent SG was in a The Locust video.

  • @yoshiobermeyer2867
    @yoshiobermeyer2867 9 дней назад

    Great video! Being a little late here. I tend to put my phaser between two gain stages, but right now my order is:Humbucker guitar - Germanium Fuzz - Subdecay M3 Synthpedal - Auto-Wah - Wampler Tumnus Deluxe (EQ and Boost) into my Dumble style amp. In the fx-loop im running delay into reverb into tremolo (wrong order on purpose, for me sounds best, especially the trem at the end). Is it bluesy? Does it kraut? Does it doom? Absolutely!

  • @AJ-wh1tw
    @AJ-wh1tw 3 месяца назад +1

    Current board: front end
    Dunlop crybaby classic
    Polytune
    POG nano
    OBNE signal blender with dirt loops
    Loop 1: Boss DS1 into Hizumitas (because Wata)
    Loop 2: Does it Doom Sabbathi
    Boss NS2 Noise Gate
    Ground Control UwU Buffer/Tomagachi
    FX Loop: EHX Small Clone Chorus
    EQD Avalanche Run Delay/Reverb
    Strymon Zuma Power Supply

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад +1

      Signal blender is such a rad pedal! Thanks for watching 🙌

  • @CharlieMoney777
    @CharlieMoney777 3 месяца назад

    Samp pedalboard 👍🏼 and Polytune3.
    Everything else changes constantly.

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад

      Those are two greats things to use all of the time!

  • @thevastexpanse
    @thevastexpanse 3 месяца назад +1

    What kind of board are you using? That green tolex is sleek!

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад +2

      It’s from Samp Custom Cabs! He’s on reverb and makes rad boards in lots of colors and also a sick pedalboard that holds dog bowls I was thinking of getting for my weiner dog 🙌

    • @thevastexpanse
      @thevastexpanse 3 месяца назад

      @@FuzzlordEffects thanks so much!!

  • @QuentinLatour
    @QuentinLatour 3 месяца назад +2

    Am I crazy or Is he making a new version of all his "old" videos? Cause I swear I've seen him do this video before and the one for Doom Guitar Setup...
    Still... this is great content 🖤🤘🏻

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад +5

      Definitely re making some old videos :) Some of these older style ones have some pretty helpful content so want to make sure the newer viewers see them!

    • @QuentinLatour
      @QuentinLatour 3 месяца назад +1

      @@FuzzlordEffects Thanks for answering and confirming man, I appreciate it. Keep up the great work 🤘🏻😈

  • @NerdGasims
    @NerdGasims 3 месяца назад +3

    My board has a Dunlop Crybay Wah, Does It Doom Elder God, MXR Flanger & Fuzzlord Space Master.

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад +1

      Rad setup!!!

    • @NerdGasims
      @NerdGasims 3 месяца назад +1

      @@FuzzlordEffects for modulation effects phasers & choruses are cool, but I feel flangers are under appreciated. With a four knob flanger like the MXR you can get some really cool sounds with a flanger

    • @baileywatts1304
      @baileywatts1304 3 месяца назад

      sounds like a killer board

    • @NerdGasims
      @NerdGasims 3 месяца назад

      @@FuzzlordEffects also Jason I’d just like to note that I’ve had the Space Master since they first released about a year or two ago & I’ve thought about running it through the effects loop of my amp but the dark control is so useful that the pedal works just as well in front of the amp. Still haven’t ran the pedal in the effects loop like I normally would with a delay or echo pedal, just adjust the dark control and it sounds good in front of the amp

  • @HurtsmithTV
    @HurtsmithTV 3 месяца назад

    Slow loris > rat > mountain mover > Aurelius > ghost echo

  • @thefrogger6507
    @thefrogger6507 2 месяца назад +1

    Any chance you'll make something like this for bass? I became a bass player partly because of Doom and I don't see it get as much attention as guitars

  • @masterofreality230
    @masterofreality230 3 месяца назад

    I have been eyeing the Harley Benton modular power supply. It puts out a ton of power and its like $130. Dont know how well it works as far as noise goes.

  • @ManicValentine97
    @ManicValentine97 3 месяца назад

    I've got a Does It Doom Doomcaster, Daredevil Pedals Double Atomic Cock, Snarling Dogs Mold Spore, Jext Telez Range Lord, Earthquaker Devices Life Pedal V2, Catalinbread Fuzzrite, Stomp Under Foot Astoria, Stomp Under Foot Utility Muffin, Stomp Under Foot Civil War, Stomp Under Foot Green Russian, Earthquaker Devices Hizumitas, Roger Mayer Visage 45, Boss FZ-2 Hyper-Fuzz Hyper-Fuzz, Fender Shields Blender & a Colorsound Aussie Powerboost in a week or so i might be getting a Analogman Sun Face with BC109C Silicon Transistors or a Black Cat Bee Buzz

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад

      Sounds like you need a Fuzzlord FU-2! 🙌

  • @jordanpratt3821
    @jordanpratt3821 3 месяца назад +1

    Ep booster...ts9....pharoah...slash sig octave

  • @joshferguson9703
    @joshferguson9703 3 месяца назад +1

    Well I have compressor first set for max sustain then I go into an eq then a fab fuzz set as a boost then a rat and when I want something different I turn off the rat and turn on my fab tone

    • @josephguillermo3007
      @josephguillermo3007 3 месяца назад +1

      I tried having it in front and I always felt it was in the way so I left it on the back of the line.

    • @joshferguson9703
      @joshferguson9703 3 месяца назад +1

      @@josephguillermo3007 I tried that but to my ears it really didn’t sound right

  • @liamfernandez1457
    @liamfernandez1457 3 месяца назад +1

    BLEED ME AN OCEAN

    • @FuzzlordEffects
      @FuzzlordEffects  3 месяца назад

      Always have fun sneaking in Acid Bath riffs!

  • @GothicXlightning
    @GothicXlightning 3 месяца назад +1

    as long i got my DELAY+HIGH GAIN DISTORTION+G EQ+LOOP on my Pedalboard is all DOOMMETAL LOVE for me
    especially if i got my Black Gibson DROP HELL Tuned

  • @nrowland4
    @nrowland4 3 месяца назад

    Let’s see …. Currently a Non Human Audio Slow Loris> Catalinbread Mega Viper> Frost Giant Electronics Soma into the Orange Supercrush 100.