You honestly can’t tell the difference between oem fender flares and these. I managed to find full oem hellcat widebody kit with fenders from a mopar parts seller that came off a flooded cat. I ended up buying just the flares from vicrez, since the oem flares require a shit load of cutting in the rear door and body fenders.
All becouse of this video I just bought the full widebody kit for my hellcat charger , then I bought the widebody rims oem from a person on offer up that took there rims off there hellcat I payed 1,850 for the rims, and I just payed 1300 to paint and I’m install the kit and the widebody rims , there also going to give the car an alignment, today they will be done wit my car and I will post a video I also send the people from the shop this same video and told them I wanted it just like this one and they did every exact thing to the tee thank you guys ❤
Definitely need this. Wondering what kind of spacers I would need to make the wheels stick out a bit more tho? That is while I save up to go wider on the wheels and tires
it really depends if you are going to be putting bigger wheels and bigger tires. 392 suspension is a bit lower than a regular RT wheel gap would be the answer to your question
I Enjoyed this video of the team putting this together. I would love to get this work to my 2014 charger but I see y'all only do 2015 and up. Great work and video though.
@@ChevyLS1454 fr 😂😂 that dumbass prolly payed that extra 15k dealer mark up🤣🤣 when u can just buy an aftermarket widebody kit and take it to a professional installer shop
I have mine unpainted so I have to match plum purple this video save my sidemarker problem i don’t want to mess with the electronics and lightnings of the car without watching help videos lol thanks 👍🏻
Where are you all located??, I definitely would want my fenders cut for just the widebody installation...you all look very professional with cut and adding the screws.
So if you cut the fenders to make room for wide wheels, wouldn’t the fender flares not line up considering the bracket would sit higher??? Please explain
My question is the way this kit is build and put on is it the same exact way how they did the original widebody charger or is the original came together attached if that make sense?
How do I cut the fender and still be able to align the bracket that holds the fender flare? It seems like the bracket is attached to the lowest part of the fender after the cut but does it still follow the perfect arch of the flare already fixed to the bumper covers? I need this cleared in my head so I can order this!
So for fender Flare cutting that's something based on various factors that you would have to consult with your shop to find out. We wouldn't want to give you an incorrect measurement based on general consensus and not the actual measurement pertaining to your vehicle and mods
for someone who sells the kits the video could of been way better .. even divided into different parts. One video well explained for the front bumper , another for the skirts and so on .. like them 1A auto videos are well explained .. this video does show how to do it but even they were kind of struggling from time to time
While we are giving constructive criticism...it is OK not to edit in the most annoying and sometimes offensive music (if you can call it that), for every second when there is no talking. I would MUCH rather just hear the sounds of the shop. I have no idea why it seems like almost every shop or DIY video maker feels the need to do this.
Hello! Love the video and how educational it is, I have a 2016 with adaptive cruise control, would they just cut that out to install it on the new widebody front bumper? It’s going to be professionally installed. Out of my pay grade lol
I've been thinking about purchasing this kit, but I have so many questions. -What do you do about the stock fog lights? -What about the ACC sensor? -If the fenders are cut, how are the brackets and flares not too high to match the other pieces? -If you do cut the fenders, are the brackets cut, too? If not, how does the tire not hit them?
I installed it last week and I am rubbing on front fender with vicrez wheels on 315's tire set up . Might go smaller tires hopefully it stops the rubbing I did it on a scat pack so it sits way lower
I'm interested in getting this for my Daytona but I am wondering can I run spacers with my stock wheels ? Also I want to keep my snorkel grill but I want the mail slot bumper am I able to have both as well as my fog lights ?
the cool thing about the manufactured wide body is that you get the suspension and 305 tires with it. the conversion kit is cool but you need the performance parts with that wide body!
Hello @DCGEMINI202, Hello! I am here to assist you with any questions or concerns you may have. Please do let us know where you are located so we are able to search one for you. Thank you, Nicole
Hello, Attached is the kit we have available for Dodge challenger RT as well as the vehicle fitment notes for you to check. www.vicrez.com/vicrez-demon-widebody-fender-flares-vz102412-dodge-challenger-392-r-t-sxt-2015-2016-2017-2018-2019-2020-2021-2022-2023?search=vz102412
Regarding to the steering wheel attached is the link for the ones we have available for Dodge Challenger. www.vicrez.com/index.php?route=product/search&search=dodge%20challenger%20steering%20wheel Thank you, Nicole
If I have a 2020 Dodge Charger G/T, what tire/wheel setup should I run so that I don’t rub without cutting into the fender. I would buy the kit if I knew what tire specs to run.
Since you have GT or SXT which is the base Model the stock height is higher than an RT, Scat Pack or Hellcat. You can use the Wheels recommended 20x11 all round. These wheels have the widebody factory specs: www.vicrez.com/automotive/wheels-tires/custom-wheels-rims/custom-wheels?ajaxfilter=f32-wheel-offset,25/manufacturer,vicrez-wheels
I’ve been searching forever for the answer to this. If the wide body kits front bumper has part of the flare on it preinstalled, and you have to cut into your cars fender, how would the bracket/flare line up perfectly with new bumper?
Where did the rear parking sensor bracket come from? The bracket that mounts each sensor to the rear bumper? Was it taken off the old bumper? If so, how? I am asking because I have a professional shop currently installing this exact kit on my 2018 Dodge Charger and they said the original bumpers sensor brackets are molded onto the bumper. The Widebody kit did not come with sensor brackets so unless I find some (Which I can't) then I will not have rear parking sensors. Please Assist!
So just to make sure before I purchase your full body kit. 2018 dodge charger RT will NOT need ANY cutting at all to properly fit with no rubbing? Correct? I will be using the widebody rims and full kit
yes you can wiggle it carefully but it is a very tight place on there, so we just pulled it off but we do include new tabs with the widebody rocker panels.
U said I'd have to cut a couple inches if I'm installing bigger wheels, but exactly how much? I'm currently close to purchasing a 2018-2020 dodge charger rt scat pack, and I plan to purchase this widebody kit, as well as a pair of 22-inch wheels for the rear of my car. So that being said, I'm kinda hesitant to cut anything that'll potentially f up my car. How many inches of plastic will have to be taken off in order to fit a 22 inch rear wheel?
I did a charger with wider wheels they were 22s and if you want absolutely no rub you will have to cut a lot, I had to cut about an inch a and a half up front and there was still sometimes a rubbing issue
We used different sizes the rear bumper has the circle that you would need to cut it to. We used a small side and continued to cut more and more until we got to the size needed for the sensor.
The bumpers and body kits come unpainted. We dont offer the service of painting the bumpers because we might get the color wrong and also to not risk the paint getting damaged in transit.
I want that wide body kit so bad but I have a sxt I can’t disrespect the srt models like that if I had the rt model I would consider at least they sound a bit like a srt with different exhaust pipes..😩
It’s your car so what you want and enjoy it. I have an rt. It’s as fast as a v6 trust me but I love it and I’m gonna make it my own! Do the same and who cares what people think
So this was done on the 6.4L Daytona edition correct? And you didn’t cut the fenders. But you will be going to a widebody wheel set up? If this is correct And you’re able to drive the car like normal, please let me know
Hello, Indeed this was done on a 6.4L driving is still normal there is a slight rubbing happening on the brackets but we will probably be making an update on that modification.
@@vicrezcom Any updates on that new video? Also, for the rocker panel, are you breaking the existing tabs off? Or is there a way to remove them without breaking them?
Is there supposed to be a small gap on the outer edge of the headlight holes I got the bumper on as good as possible but i also have a small fender to bumper gap as well I’m not sure how to fix it…it’s honestly frustrating
Hello, unfortunately we do not install this product. However if you are interested in purchasing this product it is on sale for $1,879.00 at this time.
Do you happen to know if anyone has ever tried putting this kit on a 300? I was curious how close the wheel well diameters were on a Charger and a 300 and if they were close enough for someone to try that. There's always someone saying, "oh the Chargers and 300s are on the same platform" but there are subtle differences between the two and this area could be one of them. Anyway, this is a nice looking kit, which is why I ask about its potential compatability with the 300.
Do you guys offer widebody installation in your shop that is located in Whittier, CA? Please respond because I am hoping I can take my scatpack so you guys can convert it into a widebody.
You honestly can’t tell the difference between oem fender flares and these. I managed to find full oem hellcat widebody kit with fenders from a mopar parts seller that came off a flooded cat. I ended up buying just the flares from vicrez, since the oem flares require a shit load of cutting in the rear door and body fenders.
🔥
U guys should offer basic colors to the parts like oem colors
2 years later and still not a option
All becouse of this video I just bought the full widebody kit for my hellcat charger , then I bought the widebody rims oem from a person on offer up that took there rims off there hellcat I payed 1,850 for the rims, and I just payed 1300 to paint and I’m install the kit and the widebody rims , there also going to give the car an alignment, today they will be done wit my car and I will post a video I also send the people from the shop this same video and told them I wanted it just like this one and they did every exact thing to the tee thank you guys ❤
See how long this video is? That is why I am splitting my widebody install into 3 videos
Definitely need this. Wondering what kind of spacers I would need to make the wheels stick out a bit more tho? That is while I save up to go wider on the wheels and tires
At least 1.5 or 2 inches
2inch for sure
Why am I watching this ? I don’t even have a Scat Pack. I drive a Hyundai 😂
Eesh. Get a charger
@@evo2500 Im trying bro Lol. I been working my ass off driving my 18 wheeler 15 hours a day trying to save to put down on one.
@@CrashhMedia u get it bro?
Had a insane amount of time with getting the bumper to fender screws to get it to fit properly
🔥 plan on doing this to my Daytona
I always see that it is recommended to cut into the car for 392's and up but do you need to cut the car for the R/T's?
it really depends if you are going to be putting bigger wheels and bigger tires. 392 suspension is a bit lower than a regular RT wheel gap would be the answer to your question
Dope I skipped all this an just bought a Widebody👍but if I had a slim 392 or RT I would definitely consider this 🔥
Hemi I know you not vouching for this...
@@gameplayer222 why shouldn't he?
@@gameplayer222 whats wrong with it? its hard to find a wide body out here for a decent price and just for the dealer to do it its a extra 16k
@@gameplayer222 stop hating boy 🤣
Isn't it cheaper just to buy a widebody ? 🤔
amazing job!🔥
I Enjoyed this video of the team putting this together. I would love to get this work to my 2014 charger but I see y'all only do 2015 and up. Great work and video though.
if you cut the fender won’t the widebody fitment from the bumper and fender be off?
Was thinking the same thing
Thank god I bought my 22 scat widebody new!!!! That’s toooo much work.
While spending a extra 25k for a wide body kit nah.
@@ChevyLS1454 fr 😂😂 that dumbass prolly payed that extra 15k dealer mark up🤣🤣 when u can just buy an aftermarket widebody kit and take it to a professional installer shop
I want this eventually but the thing is you guys seem like pros I’m just not sure if I can find anybody that would do it like this
Spend the extra money and drive to have these guys install it.
If you cut the fenders how will the flares clip in.
did you ever find out?
I know it’s. It rocket science? But. They should included instructions for the guys who always say..”All you got to do is”😂😂
Hello Chevyholic, we have install videos and assistance if need it 😁 You can contact us any time! support@vicrez.com
If you need instructions for something this simple you don't need to be doing this
You all are amazing 💪🏾. I want to do my scat like that
thank you so much :D
I have mine unpainted so I have to match plum purple this video save my sidemarker problem i don’t want to mess with the electronics and lightnings of the car without watching help videos lol thanks 👍🏻
Can you install the fog lights on this widebody kit??
You did a good job, but why you put that insulation blanket back on?
Where are you all located??, I definitely would want my fenders cut for just the widebody installation...you all look very professional with cut and adding the screws.
We have 2 locations one in California and the other in Oklahoma but we sadly do not offer installation :(
this is amazing god bless Vicrez creators what a successful bzness man 🙏🏽
all thanks to so much support from you guys 🙌
At the 2:13 marker what are you using to secure the bottom grill ? Also what do you use to secure to top portion of the bottom grill
I’m getting a 2013 rt charger and I seen this widebody on the old gen and I looks very good thinking about widebody it
How do y’all install the bumper, I’ve been trying for the past 3 hours and the bracket wholes don’t match up
I currently am having the same problem did you figure out a solution please let me know 😂😂😂
Can you guys do a video showing install for lowered cars. Like how the gaps are filled after cutting the flares
we will be working on that
So if you cut the fenders to make room for wide wheels, wouldn’t the fender flares not line up considering the bracket would sit higher??? Please explain
We will be making a video about it :) but it doesn’t affect fitment
I have this intire kit in my garage brand new in boxes and never opened it yet ...I might sell it 🤷🏾
🤗️
For how much?
My question is the way this kit is build and put on is it the same exact way how they did the original widebody charger or is the original came together attached if that make sense?
How do I cut the fender and still be able to align the bracket that holds the fender flare? It seems like the bracket is attached to the lowest part of the fender after the cut but does it still follow the perfect arch of the flare already fixed to the bumper covers? I need this cleared in my head so I can order this!
Any solutions on this
yes
So for fender Flare cutting that's something based on various factors that you would have to consult with your shop to find out. We wouldn't want to give you an incorrect measurement based on general consensus and not the actual measurement pertaining to your vehicle and mods
Did you guys do any cutting?
for someone who sells the kits the video could of been way better .. even divided into different parts. One video well explained for the front bumper , another for the skirts and so on .. like them 1A auto videos are well explained .. this video does show how to do it but even they were kind of struggling from time to time
we were going to do that but we decided to just do it all in one video. Thank you for the feed back :)
While we are giving constructive criticism...it is OK not to edit in the most annoying and sometimes offensive music (if you can call it that), for every second when there is no talking. I would MUCH rather just hear the sounds of the shop. I have no idea why it seems like almost every shop or DIY video maker feels the need to do this.
Hello!
Love the video and how educational it is, I have a 2016 with adaptive cruise control, would they just cut that out to install it on the new widebody front bumper? It’s going to be professionally installed. Out of my pay grade lol
Hello Kevin, please contact us on support@vicrez.com and we will better assist you! 😊
I've been thinking about purchasing this kit, but I have so many questions.
-What do you do about the stock fog lights?
-What about the ACC sensor?
-If the fenders are cut, how are the brackets and flares not too high to match the other pieces?
-If you do cut the fenders, are the brackets cut, too? If not, how does the tire not hit them?
You’re better off spending an extra 1k and have it professionally done bro, way too many things could go wrong if don’t at home yk
I wonder if you could use rivets fro where they put screws at 🤔🤔🤔
Yes, you can
I own a 2021 charger scatpack pack and I purchase this wide body would you guys be able to install it for me? With your rims as well ?
did u get it installed??
Do you guys have a adaptive cruise control grille?
Is there anyway I can take my car to you guys for installation?
I installed it last week and I am rubbing on front fender with vicrez wheels on 315's tire set up . Might go smaller tires hopefully it stops the rubbing
I did it on a scat pack so it sits way lower
we typically recommend 305/35r20s on a 20*11 rim with -2.5 offset
How long did install take? Just curious
Hey I have a question I just bought this on my charger and I added it does it affect it if I take it to get wrapped ?
Yep i need this 🔥🔥🔥🔥
for sure!
I'm interested in getting this for my Daytona but I am wondering can I run spacers with my stock wheels ? Also I want to keep my snorkel grill but I want the mail slot bumper am I able to have both as well as my fog lights ?
You'll always need spacers regardless and bigger wheels and tires will help.
They make the snorkel grill For widebodys now
The clamps you used to bolt on flares to connect them , which ones did you use? Do y'all sell them?
We did use self tapping screws which can be purchased at any hardware store.
After the front bumper brackets are removed how do you secure them on the new bumper
the cool thing about the manufactured wide body is that you get the suspension and 305 tires with it. the conversion kit is cool but you need the performance parts with that wide body!
Exactly why I will just admire from afar.
I see spacers installed on those rears but no cuts 🤔😳
Good evening, do you have a kit for a 2021 Dodge Challenger hellcat? Thank you.
I wish these guys were in va beach. Nobody out here can install this on my car
Hello @DCGEMINI202,
Hello! I am here to assist you with any questions or concerns you may have. Please do let us know where you are located so we are able to search one for you.
Thank you,
Nicole
@@vicrezcom virginia beach virginia
I want to buy the widebody kit for a 2019 RT challenger and also the led steering wheel
Hello,
Attached is the kit we have available for Dodge challenger RT as well as the vehicle fitment notes for you to check.
www.vicrez.com/vicrez-demon-widebody-fender-flares-vz102412-dodge-challenger-392-r-t-sxt-2015-2016-2017-2018-2019-2020-2021-2022-2023?search=vz102412
Regarding to the steering wheel attached is the link for the ones we have available for Dodge Challenger.
www.vicrez.com/index.php?route=product/search&search=dodge%20challenger%20steering%20wheel
Thank you,
Nicole
@@vicrezcom i was referring to the actual installation
This vid ❤is awesome I wanna learn how to add this kit cuse I wanna do mine
Glad this video can help!
If I have a 2020 Dodge Charger G/T, what tire/wheel setup should I run so that I don’t rub without cutting into the fender. I would buy the kit if I knew what tire specs to run.
Since you have GT or SXT which is the base Model the stock height is higher than an RT, Scat Pack or Hellcat. You can use the Wheels recommended 20x11 all round. These wheels have the widebody factory specs: www.vicrez.com/automotive/wheels-tires/custom-wheels-rims/custom-wheels?ajaxfilter=f32-wheel-offset,25/manufacturer,vicrez-wheels
Okay, what tire size do I run so that it won’t rub without cutting?
295/30/20 or 305/30/20?
Why you wanna widebody a v6
@@mattayala cause its his money 😂 why you in his business
I need this for my Charger.
I wish yall made a wide body kit for the chrysler 300s
Grate job !!
So if I have a gt or rt and decide to use this kit with fully stock height I will have to cut the fenders if I use the factory widebody rims?
If you have a gt or rt you should have no issues as the height is different.
@@vicrezcom even with the widebody rims?
@@alphaomega5917 Hello, yes as the suspension and wheel gap is different from SRT/Scat to the SXT GT RT
Tienen algún distribuidor en méxico?
can you do my 2016 charger skat pack?
Where are you guys located? And what’s the ticket on this upgrade?
Is that double side tape gone hold it good tho?😭
If you cut into the fender, would the bracket sit higher up making the flare sit higher also?
i have the same question please tell us
or make video of fender cutting
I was also wondering this 🤔
I eliminated my bracket and created brakes to not cut the car and have my wheels and tires set up for the rear run good with no rubbing.
I’ve been searching forever for the answer to this.
If the wide body kits front bumper has part of the flare on it preinstalled, and you have to cut into your cars fender, how would the bracket/flare line up perfectly with new bumper?
Do one for the challenger please 😭 lol I want to order the kit but want to know how to install it before ordering
We are working on it
Next video 🙏🙏🙏
Does it come with all the needed screws and rivets?
Yes
Where did the rear parking sensor bracket come from? The bracket that mounts each sensor to the rear bumper? Was it taken off the old bumper? If so, how? I am asking because I have a professional shop currently installing this exact kit on my 2018 Dodge Charger and they said the original bumpers sensor brackets are molded onto the bumper. The Widebody kit did not come with sensor brackets so unless I find some (Which I can't) then I will not have rear parking sensors. Please Assist!
did you ever figure this out???
So just to make sure before I purchase your full body kit. 2018 dodge charger RT will NOT need ANY cutting at all to properly fit with no rubbing? Correct? I will be using the widebody rims and full kit
Depends on what tire size you buy and your suspension like this car it needs to cut to run 305s
You will need to cut if you run 20x11” wheels and 305 tires, otherwise you hit those bumps, tires hitting factory fender, hiding under flares
What’s did you get the front lip? Can you send me the link of the exact same one
Do you guys offer widebody kit installation in your location in Whittier, CA?
unfortunately we do not offer in house installation
Can you install the snorkels? Can you install if your car is on lowered springs?
Hello the snorkels grille?
for the rocker panel, are you breaking the existing tabs off? Or is there a way to remove them without breaking them
yes you can wiggle it carefully but it is a very tight place on there, so we just pulled it off but we do include new tabs with the widebody rocker panels.
So basically if I’m running 315s on all four corners I’ll have to cut even if I’m stock ride height
U said I'd have to cut a couple inches if I'm installing bigger wheels, but exactly how much? I'm currently close to purchasing a 2018-2020 dodge charger rt scat pack, and I plan to purchase this widebody kit, as well as a pair of 22-inch wheels for the rear of my car. So that being said, I'm kinda hesitant to cut anything that'll potentially f up my car. How many inches of plastic will have to be taken off in order to fit a 22 inch rear wheel?
I did a charger with wider wheels they were 22s and if you want absolutely no rub you will have to cut a lot, I had to cut about an inch a and a half up front and there was still sometimes a rubbing issue
You guys recommend I paint the pieces before installing or should I install it first then paint match the pieces?
Either way should work, but to ensure to perfectly match the color. Especially if you any other color then black. Install first and paint match it.
Shop locating? The ones who installed this kit. Thanks
Whats the drill size bit that was used to cut the holes for the parking sensors?
We used different sizes the rear bumper has the circle that you would need to cut it to. We used a small side and continued to cut more and more until we got to the size needed for the sensor.
Why put the older grill and not the oem 2019 grill it that came on the charger 🤔
bumpers are molded differently
Just need to get the wider wheels and tires to match that wide body now.
we got widebody wheels on :)
When u added the wider wheels did it still ride smooth ?
I just installed it and it rides much smoother
What’s the part number for the flare brackets ? my kit didn’t come with any
Send a email to our support team with your order number so we can send you the missing items you need. Support@vicrez.com
Do the bumpers and body kit come in gloss black automatically?
The bumpers and body kits come unpainted. We dont offer the service of painting the bumpers because we might get the color wrong and also to not risk the paint getting damaged in transit.
replacement fender flare how do i buy
Does anyone know about how much this would cost?
What If The Front Is To Low & The Tires Start Scraping Under It
I want that wide body kit so bad but I have a sxt I can’t disrespect the srt models like that if I had the rt model I would consider at least they sound a bit like a srt with different exhaust pipes..😩
It’s your car so what you want and enjoy it. I have an rt. It’s as fast as a v6 trust me but I love it and I’m gonna make it my own! Do the same and who cares what people think
This comment made me laugh. Gotta respect the srt. It's kinda like scat pack dudes putting hellcat emblems on their ride. No respect.
@@yahooarchie8306 he prolly shouldn’t put srt on it I’d never upbadge either but it’s just a body kit don’t be a pussy
So this was done on the 6.4L Daytona edition correct? And you didn’t cut the fenders. But you will be going to a widebody wheel set up? If this is correct And you’re able to drive the car like normal, please let me know
Hello,
Indeed this was done on a 6.4L driving is still normal there is a slight rubbing happening on the brackets but we will probably be making an update on that modification.
@@vicrezcom please post a video on your IG or RUclips whenever you do it outlining what you did. I’d greatly appreciate it
@@bloodbath08 Hello, yes for sure no worries it will be all over the place!
@@vicrezcom Any updates on that new video? Also, for the rocker panel, are you breaking the existing tabs off? Or is there a way to remove them without breaking them?
I also have a Daytona 392 and I would want to put the wide body wheels on mine, I guess that’s a no go without cutting into the fender
Is there supposed to be a small gap on the outer edge of the headlight holes I got the bumper on as good as possible but i also have a small fender to bumper gap as well I’m not sure how to fix it…it’s honestly frustrating
😥️
I need that bumper you removed.
I’m planning on doing this to my RT with some 1.5 inch spacers but my car is lowered 2 inches, question is will I have issues with rubbing
Hello, depends on your stock height :)
How much would it cost to get the widebody kit installed on my 16 charger r/t I live in Conroe tx
Hello, unfortunately we do not install this product. However if you are interested in purchasing this product it is on sale for $1,879.00 at this time.
Is there any way to do the rear door flares without drilling into the door?
Yes you can just use 3m VHB double sided tape
Where is this shop? And what was the total cost ?
Do you happen to know if anyone has ever tried putting this kit on a 300? I was curious how close the wheel well diameters were on a Charger and a 300 and if they were close enough for someone to try that. There's always someone saying, "oh the Chargers and 300s are on the same platform" but there are subtle differences between the two and this area could be one of them. Anyway, this is a nice looking kit, which is why I ask about its potential compatability with the 300.
You can we have seen other customer custom mold our kit onto their 300, just keep in mind a lot CUSTOM work will be involved
My RT charger is currently at the stock height, if i buy this and install it do i have to worry about anything rubbing?
Basically, they installed this on a SRT 392 which has a lower stock height than a RT so if you install it on an RT you won't need to cut anything
Do you guys offer widebody installation in your shop that is located in Whittier, CA? Please respond because I am hoping I can take my scatpack so you guys can convert it into a widebody.
we unfortunately do not offer in house installation
Hopefully someone can answer this but would aftermarket wide body charger diffusers fit with this kit? Or only the diffuser it comes with fits?
Aftermarket will also work as long as its meant to fit Widebody SRT hellcat widebodies
I need them to install mines, if I get it
What did you use to secure the front side bumper brackets
Self taping screws like they did on the rear doors.
how much you guys charge for the install?
Where are y’all located ? How much would this kit cost installed and paint matched ?
We are located in whittier CA. We also have other locations in Santa Fe springs and oklahoma.
Can you make side and front splitters for real wide bodies
we have them available
do you guys make any stiff suspension systems too help with rub
Hello, if you have demon suspension you could go ahead and adjust they suspension :) but we do not offer it currently.
Coilovers solve that issue
Do you guys have a shop that’ll install it ?
What size of bolt and washer did you guys use to Assemble the front bumper? Does anyone know?
You can try using your old hardware from your order bumper or you can get like 3/4 hardware
Are you guys in florida where can I install it