Supermax 19-38 Eliminate snipe and kickback with Bandaspalette.com
HTML-код
- Опубликовано: 3 окт 2024
- In this video, I'll show how to clean the drum rollers, and set the drum rollers.
Helpful video from Laguna tools
• 19-38 Drum Alignment T...
Thanks for watching!
Just bought this same sander used. Had to replace the brass bushings for the rollers. This video will take me to the next step of tuning my machine. Thanks for making the content. Good info. Thanks again.
Much appreciated. This is a great sander. Very reliable once it's dialed in.
This is an awesome video thanks so much for sharing. Just bought the same sander in the same “like new” condition and can’t wait to dial it in
Heck yeah. These are amazing sanders when dialed in. If you're looking for great priced drum sander paper check out mirka-online.com/customer/account/login/
Very helpful and clear explanation, thanks for posting!
Much appreciated!
Lots of helpful info, thanks. I’m about to tune up my new to me 25-50.
Heck yeah. 25-50!!!! Table tops are going to be no big deal for you haha. Great find friend!
Thanks enjoyed the review and info. I live in The KC metro as well
Great video
Learned a lot from your video being the new owner of a Supermax 16-32! I’ve had it for four months and love it, until recently. I’m making an end table with a 24x28 top, red oak. When I send the panel thru (less than 1/64” bite) , half way thru it starts making a hard left turn (from operators vantage) making divots in the panel! I try to guide it thru but still doing it, but much lesser degree. Drive belt not slipping. My question is do you know what the factory set for the tension rollers would be? I was messing with those a lot and now I don’t know where I am. I contacted Laguna tech support five days ago an still waiting for help. Funny thing is yesterday I put a 24x24 plywood thru and it ran fine!
I'm sure this video will be very helpful
ruclips.net/video/JkHXWQkOlVU/видео.html
I can’t locate the li k to the video for calibrating the pressure of the rollers. Any help would be greatly appreciated. Thanks!!
Thanks for the great video! I'm in the market for a drum sander and the Super Max 16/32 is on the top of the list.
Question - You mentioned you also have a Grizzly drum sander, any complaints on that machine?
I'm looking forward to more of your videos, I like your no - nonsense style & complete info. way of doing it.
Thanks again, I'm glad I found your channel.
Thanks a lot, sorry just saw your comment. I love the Grizzly brand drum sanders, shortly after this video I purchased brand new a 24 inch double drum Grizzly sander, they are fantastic machines, super reliable and their feeding belts are unmatched. Thanks for watching
I'm surprised that the hook and loop backing doesn't interfere when you put the paper on a non hook and loop machine like the SM 19-38. I love Mirka paper and also have a 19-38. Is the Mirka paper holding up and not sliding around on the drum?
No sliding at all. As you know, the Mirka brand is very thick and durable. I used to change so many papers when I used the grizzly or 2sand brands, and now it's lasts me a few extra sanding sessions. I think the thickness of the paper helps it stay rigid and in place.
It looks like someone modified or replaced your conveyor belt with a narrower one. My conveyor belt is nearly the full width of the table. Either that or maybe supermax used to run a narrower belt? Just curious if that is intentional.
I bought this from a guy that did trim and other finish capentry and was going out of business. He didn't take very good care of it, when I picked it up, he said he was running old barn wood through it, and some of the barn wood had old nails. I'm pretty sure the reason for the conveyor looking more narrow is for that reason.
I have same sander. Your conveyor belt is narrow?
hello, can i ask what you think about this tool? I wanted to buy jet, which one do you recommend?
Hello Guiseppe. I like this sander it does work great. I would actually recommend a Grizzly sander. I have two Grizzly sanders and their quality and very durable machines. The Laguna works great, my only complaint is the feed belt, it does okay, but it could be better.
What is the part number of the sandpaper or brand name at beaver...
Definitely. Here is the kind I use. I use 150 grit, 180, 220. mirka-online.com/belts-discs-rolls-sheets/rolls/hook-loop-back/3-inch.html
Good video!
Any idea how to adjust the feed belt. No matter the tensions of those little wrenches and having one side much tighter then the other, after run at around #3, after 10 minutes it has drifted to the inside. So I have to shut it off, loosen those wrenches, pull the sandpaper feed belt all the way up to outside, tighten those wrenches...and have to do it all again in 10 minutes.
Any ideas?
Thanks
:)
I think this suggestion may help. You know that nut you loosen or tighten to adjust the tension with the wrench?
I would replace it with a locking nut (lock nut). Sounds like the nut is ever so slightly moving with the vibration of the machine. The lock nut has the nylon interior that I'm betting would help eliminate the movement you're experiencing. I'm sure you've watched this video, but thought it may help too.
ruclips.net/video/JkHXWQkOlVU/видео.html
One thing I noticed on these sanders as I started to dig into it to dial it in, is that they used some pretty inexpensive bolts. Since then I've had to replace a few bolts and replaced then with hex bolts, those allen drive bolts are pretty crappy, and can only take a few adjustment rounds and they're done.
Hope this helps my friend!
@@BandasPalette thanks brother!!! I’m gonna mark a side to see if either are loosening. It’s so frustrating. I hope this is the fix. Thanks so much for sharing that info!
:)
You bet!
@@BandasPalette sadly the nut wasn’t moving :(
Gonna try another belt...hopefully I just have a bad one. These things aren’t cheap!
Thanks for you’re info though...good to know.
:)
@@enzprintco.8625 did replacing the belt fix your issue?
have you had to replace the bearings yet? I have to on mine but I'm not mechanical. The coupling confuses me.
No I haven't. But if you do record yourself doing it. This helps me to know where pieces go back into place. Sometimes from memory I forget.
Hi, thanks for the video. Just bought a new 16-32 Laguna and would be interested if the place you got your sandpaper has a web site. Thanks
Yes, definitely. I buy mine from BIS Mirka. This is an example of one of the grits I use. Their pricing is amazing and their paper lasts longer than any brand I've tried. Hope this helps. Let me know if you have questions.
mirka-online.com/44-325-180-jepuflex-roll-abrasive-3-x-25-yds-180g.html
@@BandasPalette Great pricing!! Thanks / I am ordering.