I rarely feel any envy, but this Supra ticks all the right boxes for me. Super clean and nice, absolutely love it! Oh and cool to see Moose on the channel again, one of my favourite SA characters!
I know how much you guys like feedback. That no music montage for the seat bracket was pure ASMR and you need to bring us more of that. That was AWESOME
I have never once found a aftermarket seat cover that fits really well. Often just have to accept some imperfections even after steaming and stretching.
For the steering wheel. I got a more concave wheel that solves my knee hitting the wheel while heel and toe. And you can lower the wheel more and still have room for your knees.
I’m not sure why the back seats bother some people, I think everything ties in super nicely, especially if you look at it from a 90’s style perspective. I think the interior looks awesome, great work guys!!
I have Recaro Sportster GT's (with Planted mounts) in my car as well and absolutely love them. It's amazing how much of a difference it makes to the driving feel, for me at least right up there with adding an atb diff to the car. Good work guys
That cockpit notch over the dials is killing me. p.s - Wangan Midnight soundtrack need to be blasted, when you finish Skyline and Supra. I think that's the only way to celebrate it!
Although your not sure on the suede I have to say I like how the suede matches with the rear speaker grills and seat belts. Definatley breaks up the visual look of the rear of the interior. Looks great!!
I was having exactly the same problem with the bride rails and this was exactly what I was looking for to seat lower. Love how this series is really helpful also for viewers in picking up the right products.
I didn't even buy the lowest Bride seat rails, and I sat so low only my eyes were visible when looking in the side window, and I am 6ft1. I looked and felt rediculous. So I used a Steel square bar to raise the seats close to an Inch. Now I can see out the windows and have about 2" of headroom above my racing helmet. I dont understand why you had to make your seats any lower than a Bride rail? I purposely bought the tallest one they make so i wasnt sitting under the dash.
I've really been enjoying your JDM legends series guys, awesome cars, awesome content and it's so fun to watch your videos! Hit up those faded speaker grilles with a few light coats of Duplicolor Vinyl and Fabric spray and they'll be looking factory fresh again. BTW I used all hog rings when I recovered my MKIV seats and it was pretty straight forward.
Beautiful job on the interior boys! It's really looking fantastic. Seating height in Supra's has always been my biggest issue too. I'll keep you posted on the central locking kit too, hopefully it'll fit under those low seats! I really want to see some quick footage of Pete's stash sometime, it's really become legendary!
I did a few seat upholstery changes, i work at dealership, and we often use cable tie method, but what i can tell you is if it looks crooked and like mesh, or baggy, it should fix itself overtime
Myself I couldn't handle the difference between front and rear seats on my own car. I would be taking them to a get the covers made to match the Recaros up front 😊
I think zip ties are easier but would be concerned that cutting slits would cause the material to tear easier. Maybe use a punch or pick to make a circular hole? Or if it's not real leather, a soldering iron?
Guys as always awesome video and editting… but come on you buy a brand new ashtray but then leave that rear seat wrinklier than my grandma… THAT tweaks my OCD!! The rest of this Supra is premium plus 👌🏼
Hi Pete, Thank you for the heads up on the Starrett Center punch. I ordered one of these following the like in your description for the Starrett 18a and it came today. It seams really good quality only I was a little disappointed with the force it has, doesn’t seam as powerful as yours. I noticed there are some more heavy duty ones and just wondered which model you have as show in this video? Cheers Mark.
Seems like pop rivets would’ve been a better solution to attach the seat mounting plate to the slider rather than trying to bolt it from the underside.
Saw this and immediately purchased Works Bell hub and Momo wheel 😎 But WB hub does not fit the Momo hub ring with grounding tab to retain horn function 🙄 Any help out there? The WB hub and Momo wheel bolt up fine without the Momo ring, but I need a horn, @speed academy were ya'll able to keep the horn??
This is a very common issue, we usually run a ground wire from somewhere in the hub to the horn. I dont recall exactly how I did it but we have a working horn
I didn't even buy the lowest Bride seat rails (there are 2 versions lower than the one I run), and I sat so low only my eyes and the top of my head were visible when looking in the side window, and I am 6ft1. I looked and felt rediculous. So I used a Steel square bar to raise the seats close to an Inch. Now I can see out the windows and have about 2" of headroom above my racing helmet. I dont understand why you had to make your seats almost sit flat on the floor? I can still store things under my seat. Are you guys over 7ft tall? Because even my mate who's 6ft5 has plenty of head room in my car.
Pete be having all kinds of well needed parts at the right time hidden away in the stash....he is a car builders dream neighbor
For Real
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- SEXY-NUDEGIRLS.HOST 🔞
𝐏𝐎𝐑𝐍 𝐂𝐎𝐋𝐄𝐂𝐓𝐈𝐎𝐍
Ⓒ︎ⓛ︎ⓘ︎ⓒ︎ⓚ︎👆
RUclips: This is ok Someone: say "Heck" RUclips: gone #But #I #I love #such #fisherman #funny #fun #young female #funny #垃圾
RUclips: これは大丈夫です
誰か: 「ヘック」と言う
RUclips: なくなって
#しかし #わたし #私は愛する #そのような #漁師 #面白い #楽しい #若い女性 #面白い #垃圾
I rarely feel any envy, but this Supra ticks all the right boxes for me. Super clean and nice, absolutely love it! Oh and cool to see Moose on the channel again, one of my favourite SA characters!
I know how much you guys like feedback. That no music montage for the seat bracket was pure ASMR and you need to bring us more of that. That was AWESOME
I have never once found a aftermarket seat cover that fits really well. Often just have to accept some imperfections even after steaming and stretching.
I like the ASMR style filming during the seat base modification versus dubbing music over.
For some reason it gives me anxiety. 😂
For the steering wheel. I got a more concave wheel that solves my knee hitting the wheel while heel and toe. And you can lower the wheel more and still have room for your knees.
I swear mounting seats is always a 30 minute job that takes 4 hours. No matter what.
Ain't that that truth!
Absolute truth right here!
It took me 30min to install mine, got lucky 🤣
Got the recaro sliders, Planted base and they fit perfectly!
I’m not sure why the back seats bother some people, I think everything ties in super nicely, especially if you look at it from a 90’s style perspective. I think the interior looks awesome, great work guys!!
This supra is a standout build for you guys. Looks so sharp inside and out! Can't wait to hear this thing driving.
16:55 thanks for not letting us down! 🤜🏻
I really enjoyed the short silent clips of you guys quietly working on the seat rails. It was relaxing.
The best about this chanel, are your happy faces and enthusiasm for building cars.
Love that you guys went with the OEM+ over the RIDOX! Looks amazing 🤩
This is really coming together so well! Love this OEM+ look
Fisting and girth inside a Supra. This is precisely why I come to SA for automotive content!
I have Recaro Sportster GT's (with Planted mounts) in my car as well and absolutely love them.
It's amazing how much of a difference it makes to the driving feel, for me at least right up there with adding an atb diff to the car.
Good work guys
That cockpit notch over the dials is killing me.
p.s - Wangan Midnight soundtrack need to be blasted, when you finish Skyline and Supra. I think that's the only way to celebrate it!
Although your not sure on the suede I have to say I like how the suede matches with the rear speaker grills and seat belts. Definatley breaks up the visual look of the rear of the interior. Looks great!!
I was having exactly the same problem with the bride rails and this was exactly what I was looking for to seat lower. Love how this series is really helpful also for viewers in picking up the right products.
I didn't even buy the lowest Bride seat rails, and I sat so low only my eyes were visible when looking in the side window, and I am 6ft1. I looked and felt rediculous. So I used a Steel square bar to raise the seats close to an Inch. Now I can see out the windows and have about 2" of headroom above my racing helmet. I dont understand why you had to make your seats any lower than a Bride rail? I purposely bought the tallest one they make so i wasnt sitting under the dash.
@@Skirk84 Probably because I'm using sparco R100, quite tick seat but cheap.
I’d put a 5mil steering spacer. I did that in my Miata and it changed everything.
I wasn't sure about the color of the caliper. But now looks amazing with the wheel. The seats looks awesome.
Imo I personally like the supra body more then the skyline
I've really been enjoying your JDM legends series guys, awesome cars, awesome content and it's so fun to watch your videos! Hit up those faded speaker grilles with a few light coats of Duplicolor Vinyl and Fabric spray and they'll be looking factory fresh again. BTW I used all hog rings when I recovered my MKIV seats and it was pretty straight forward.
Beautiful job on the interior boys! It's really looking fantastic. Seating height in Supra's has always been my biggest issue too. I'll keep you posted on the central locking kit too, hopefully it'll fit under those low seats! I really want to see some quick footage of Pete's stash sometime, it's really become legendary!
Let’s gooooooo gents!!!! Springs around the corner🏁🏁🏁 👌
This Supra looks great now! Well done!
The Supra looking the part now for sure!
DP talking smack like the Supra has a chance against Godzilla!
Another good one guys!
This has to be one of my favourite supra builds ever! I’m not the biggest fan of how these cars look but this changes that 🔥🔥
Such a clean build, Well done gentlemen. This one and the LS 400 has been my favorite so far.
2jz powered m5 was pretty sweet
@@daves984 which video is thst
Congrats on an amazing build! It came out so good. One more finishing touch for the interior: FLOOR MATS! 😁
Moose!!! We need more content with moose! He’s such a awesome person! The Supra looks great tho! Well put together for sure!
You guys are awesome. I remember reading modified mag with you guys in it. Thank you.
Man can't get over those wheels are so fresh 😭
I hope those back seats look better in person. Very beautiful car though. Loving this series of jdm legends
Everything is completely Ng together very nicely.👍🏼
Way to go boys !!
I would try taking a heat gun to the baggy areas of the seat bottom. It should relax the material and conform to the foam better.
That smaller center punch is designed for soft materials like brass and plastics.
Although both cars are badass, the clear winner is the Supra so there is no need to wait for warmer weather conditions...🤘
I did a few seat upholstery changes, i work at dealership, and we often use cable tie method, but what i can tell you is if it looks crooked and like mesh, or baggy, it should fix itself overtime
The supra having OEM leather deserves the Sportster GT's in leather/fabric I love mine as they blend in well with the leather in my IS-F
Very nice guys, glad those seat brackets worked out for you, definitely best option 👍
Looking good boys! Love the build overall. My OCD says you should dye the carpet black, that would take the interior to the next level
It's like you guys are professionals, good stuff!
Good to see Moose in front of the lens again 🦌
That wheel should telescope too! The previous generation and the 90's mr2 have a telescoping feature with the same switch!
Car looks amazing Dave. Can't wait to see it at TMP.
You can always redo the sides on the bottom piece and add extra foam to help with the wrinkles
Wow, PT spanked that seat about as hard as the GTR's about to spank the Supra!
That is one clean and tastefully upgraded supra. Keep up the great work👍
Myself I couldn't handle the difference between front and rear seats on my own car. I would be taking them to a get the covers made to match the Recaros up front 😊
Could have tapped the seat base frame.
Put some foam in the baggy seat
Put a spacer in the steering wheel hub.
My god this car is so beautiful
I think zip ties are easier but would be concerned that cutting slits would cause the material to tear easier. Maybe use a punch or pick to make a circular hole? Or if it's not real leather, a soldering iron?
Guys if the original seat covers have the wires in them you need to transfer them over to the new seats. It will get rid of some of that bunching.
The back seat reminds me of my IS300 seats, they had the blue tint color on them.
1:52 invest in these pliers they cut the zip tie nice and flat so it isn’t sharp!
thanks for taking care of what was once my baby
That car looks great!
The Supra is really looking very mint! Gonna be wonderful to look at in the rearview of the R34. ;)
SA does Alcantara? Joking aside, a rear seat delete kit would be awesome. Seat color looks okay.
Gotta flock that dash and center console.
Do an ASMR video. The little bit you had was decent. And it’s a huge hit on RUclips.
Tommyfyeah spec is rubbing off haha hood stuff man.
Didn't need the ASMR moment with the seat bracket but it was approved lol
I’m here for the CEs 😍
Had a chuckle at the intro
Great to see Moose!
Looks great! Nice job fellas.
I really like the cloth
I see nothing wrong with the seat covers, it’s an upgrade over the old 90s factory ones.
well done guys !!
Pop the side hog rigs off put some matting on the bolsters and re hog ring
Ahh you have chosen the cloth interior, now you can donate the leather ones to me 🤣😁👀
Nice work on the covers. I need help recovering a pair of Recaro LX's
Guys as always awesome video and editting… but come on you buy a brand new ashtray but then leave that rear seat wrinklier than my grandma… THAT tweaks my OCD!! The rest of this Supra is premium plus 👌🏼
I just love all of the ocd-ness… glad to see that I’m not the only crazy one here haha.
Hi Pete,
Thank you for the heads up on the Starrett Center punch. I ordered one of these following the like in your description for the Starrett 18a and it came today. It seams really good quality only I was a little disappointed with the force it has, doesn’t seam as powerful as yours. I noticed there are some more heavy duty ones and just wondered which model you have as show in this video?
Cheers
Mark.
That’s on me! Its a Starrett 18C. I just double checked my placed order and this is it: amzn.to/3356U1D
@@speedacademy not a problem, I will get one of these ordered. Appreciate you getting back to me, I know you guy are busy 👍
Cheers
Mark.
I like how you guys work on these cars .I like to see you work on a toyota aristo jzs161
What deburing tool did you use after drilling the holes? @ 13:17
Seems like pop rivets would’ve been a better solution to attach the seat mounting plate to the slider rather than trying to bolt it from the underside.
Pop rivets wouldn’t be strong enough - especially in an accident.
Hey guys auto extrude sells a cup holder to replace that ash tray.
Feeling the anxiety to see it on the dyno already 🤤🤤🤤
Was a side mount seat rail not available for those seats? Seems like a lot of fab work to make that bracket mount up.
Whooowee, lookin good guys. Though I will never buy a Skyline after watching this series. #Knowledgeispower
Dave, were you rooting for LH44 or MV33? Or someone else from the 2021 grid? 🤷🏻♂️
Is that a sac fan in those seats?!
Dave "shit talking" is up to new levels with the supra. Lol
Doesn't Titan offer a direct fit recaro slider/seat mount kit for a direct fit without having to modify?
You need to do the carpet even my race supra had black carpet haha
if you could recover the side blue speaker panels with the nova suede I think it would all tie together better, or paint them black?
The seat passes the Moose AND fisting test! Well done
Do these seats have a cooling fan?!?
Looked like they have a spot to mount one. I'm curious also. A feature worth mentioning for sure.
Please link the punch tool, plz
Saw this and immediately purchased Works Bell hub and Momo wheel 😎 But WB hub does not fit the Momo hub ring with grounding tab to retain horn function 🙄 Any help out there? The WB hub and Momo wheel bolt up fine without the Momo ring, but I need a horn, @speed academy were ya'll able to keep the horn??
This is a very common issue, we usually run a ground wire from somewhere in the hub to the horn. I dont recall exactly how I did it but we have a working horn
@@speedacademy Thanks! Used the WB hub and ran the horn ground wire to a large ring terminal and secured it under the steer column washer and nut. 💯
Good work
What size atoto head unit do you have for the Supra?
I didn't even buy the lowest Bride seat rails (there are 2 versions lower than the one I run), and I sat so low only my eyes and the top of my head were visible when looking in the side window, and I am 6ft1. I looked and felt rediculous. So I used a Steel square bar to raise the seats close to an Inch. Now I can see out the windows and have about 2" of headroom above my racing helmet. I dont understand why you had to make your seats almost sit flat on the floor? I can still store things under my seat. Are you guys over 7ft tall? Because even my mate who's 6ft5 has plenty of head room in my car.
shift knob?
looks great boys, GT-r what ?
Kind of off topic but are you guys going to do a update on Connie anytime soon I really like that building and still waiting for news
Watch the livestream we did