Installing 0.75 Inch Rear Spacers On A Jeep Gladiator
HTML-код
- Опубликовано: 1 фев 2022
- How to Install a rear 3/4 inch lift spacer on a Jeep Gladiator.
Torque Specs-
-Wheels 130 ft/lbs
-Sway bar bolt 81 ft/lbs
-Lower SHock Bolt 89 ft/lbs
Tools Needed-
-Torque Wrench
-22mm socket for lugnuts
-18mm socket for sway bar bolt
-21mm socket lower shock bolt
-Floor jack and jack stands (or lift)
Order here;
www.amazon.com/DAYSTAR-KJ0919... Авто/Мото
Sweet tripod you got there🤣🤣
Does one side of the rear track bar need to be disconnected or is there enough room/droop to install the spacers without disconnecting the TB? 🍻
There is enough room. No need to disconnect track bar
How to do this without a lift? Can I jack from the factory tow hitch (base?)
yes. I have seen it done with jack stands holding the frame up.
With this spacer lift, it doesn’t require longer sway bar links and shock extensions? 🍻
Nope. Just levels a heavy load.
What there any type of lift done up front?
At this point I just had a leveling kit.
Think there is any problem stacking two of these ?
I would not try.
Thank you@@WolfOverland