Modding a Vostok Amphibia 42 With Parts From Meranom
HTML-код
- Опубликовано: 9 фев 2025
- Display case-back, signed rotor, and dial from meranom.com/
SuperLuminova hands and Vostok spring-bars from "favinov" from eBay
Genuine Seiko SKX009 bezel insert and bezel from random eBay sellers.
Music by WOODJU - / woodju22
I actually liked the pre-mod version
You did a fine job modernizing this timepice . My complements .
Like the display back,makes the watch look much thicker dimension ally.Also you have very good motor skills with the tiny watch parts,good job.
Beautiful work, but covering your fingers in latex would keep the oils from your skin off of the watch parts, for example the dial and hands which could end up being noticably smudged in certain light.
Hmmm...yeah I think I'll go ahead and keep the dial I have. Take something that far apart and it will never be the same, at least if I touch it.
Great mod video perhaps the best, he does a better job with the Swiss Army knife than I could ever do with specialized tools.
I like the Russian mumbling. It's great.
Nice movement.
I can't see mine in its original 710 ministry case. But now I can picture it.
Imaginative transformation made by a skillfull watchmaker.
Cute parts-tray!
Glass caseback makes the watch too thick.
I've got one of those glass case backs on my 710. I just wish it didn't stick out so far. Seems to make the watch set high on the wrist.
Well, the movement height with the rotor is around 6.3mm...almost as thick as an ETA 7750 at 7.9mm.
Got one and replaced it with the original case back, it makes the watch 3mm taller and rises the lugs from the wrist. Not very comfortable.
Like the band you chose for the watch ,
Not sure if at 45 , with my eyesight and tremors along with the carpal tunnel op I had recently , not sure I can do this again. I did mess about with cheap watches a few years back , but now don't think I can manage. Great work. Those swiss army knives are sure capable in the right hands. LOL.
I'm working on when my Vostok auto arrives in doing much the same except I have a very rare "blizzard" black dial, a set of paddle hands and a bakelite black bezel and the display caseback (large glass) and a beautifully worn black Zuludiver ringer to finish it off making it look very Soviet and brutal even, a no nonsense Amphibia. Now if I had a mill, I would be sorely tempted to mill out one of my rare 119 Amphibia's to 22mm and source a 300m caseback, now that would be a wicked mod imho :)
Awesome work mate, Very cool to watch
I'm a big fan of these watches. Provided you do not get a dud, the Amphibian should last a lifetime. It’s a conversation starter. It looks like it is worth far more money than it actually is. The build quality is impressive and I am comparing it to several quality watches that I own. While not made as well, at approximately 1/10 or 1/20th the cost of several much higher end watches, the watch truly is impressive. The only real complaint I have is that the Lume is horrible and literally lasts about 5-10 minutes which is a joke. Other than that, the watch is impressive and I plan on buying several more for myself and family members.
I really dig the clear case back and I'm a big fan of the big mesh bracelet. But just as a personal preference I liked the original face and green bezel better.
1911jt
It messed with my OCD that the green dial is for a Commander watch and it was on an Amphibia.
So I changed the Amphibia, and built a Commander 92 to look exactly as the Amphibia was when it was green.
Anton Semionov Well that makes sense. I just like the green since it's somewhat different. I ordered my first Vostok in March and it took almost two months to arrive. Mine is a round 420 style case. But now I really want a Ministry style case and a 1967 style. I love black watches and I love the big mesh bracelets even more. So now I want to take a case and have it powder coated black to match a black mesh bracelet. It would be a one of a kind. But what color dial would go with it? A black dial might be too much black and a white dial might clash. Either way it has to be a scuba dude dial.
Go on Meranom.com, go to "shop" - "Amphibian Classic", and at the bottom of the list you'll see "Spare Parts". There's at least ten different black dials that I'm seeing there myself.
Yeah I've been to the Meranom site several times. Never looked at spare parts though. Their selection of watches seemed kinda limited. I like several of the customized models on the AM Diver site.
Amazing job!! Not sure about using magnetised tools 🤔
Interesting and useful. I can't understand why some people gave dislikes! Thanks! To me all that seem magic!
Someone told me that by leaving the rotor off, you can change this movement from a self-wind to a hand-wind. Similar to the movement on a Komandirskie. Is this accurate?
Yes. It's built on the 2414 movement. But if I wanted to do that I would make a shim to fit a 2214 movement since it's a better built movement than either the 2414 or 2416.
Wow, amazing video 👍
Смотрел задержав дыхание,как будто сам это делал. Круто, супер. Это из простых механических часов он сделал часы с автоподзаводом?
Нет, конечно. Он заменил маятник автоподзавода без логотипа Восток, на такой же но с логотипом Восток.
Даже если я не менял бы маятник, я был вынужден снять механизм авто-подзавода так как на Востоке только так можно размотать пружину учитывая что я не хотел ждать сутки чтобы она сама раскрутилась.
@@AntonSemionov На моей Амфибии (новой), даже если они пролежали пару недель, стоит их пару-тройку секунд покрутить их в руках - они начинают идти. Так что тут и выбора не было. Как я понял Вы просто остановили ход часов, что бы провести модернизацию.
Brilliant mod !
Wow you made that look easy know way I could do that but wish I could. Does the oil from your skin not harm the working if the watch which looks awesome now I will put a mesh on my amphibian as it looks great! But I did learn something thanks! Great vid 👍
Nicely done
Молодец круто получилось👍
Looks awesome
Классно. Тоже заинтересовался модернизацией часов. На данный момент имею часы " Амфибия Классик" в 420 корпусе. Правда я не разу не занимался модернизацией часов.
Lovely job.
Didn't know you could get some proper good lumed hands for these that look the same as stock, gonna have to pick them up, the stock like is abysmal
@Won Honglo Ebay
Very very good nice one mate
FELICITACIONES un cambio msgistral soberbio y muy creativo.....con una EXCELENTE maquinaria.
good music man.
Nice work.
Can you tell us more about the watch strap/band. Thank you for the video!
Its on meranom website
Great job
I wonder how hard it would be to fit a 26mm movement like a Raketa 2627 in one of these.
Those look a lot like Rolex spring bars.
omg! look how good it looks now! :O i will do this,thanks alot!@
Nice mod! What is the song that starts at 7:04?
How do you like the hands from favinov? I have some to install and thinking of a new(better) dial from them as well.
It's not on the same level of lume as you'd get on a British G10 watch like a CWC at all, but you get the smallest increase in brightness and illumination duration. If you get the dial with the hour markers painted that would be the greatest improvement since the stock lume dots are almost invisible unless your eyes are well adjusted to the dark.
@@AntonSemionov thanks for the video and reply.
My Amphibia is supposed to be shockproof, do you think I can play golf with it ?
perfect music for watch work meditation...nice timepiece too!!
On my 120 it came with a signed rotor already .. I thought they all did ...
LeonardO Most do, but some don't.
@@AntonSemionov музон агонь как и часы
Have you measured the Height and diametr of a vostok movement? If so could you tell me?
Кропотливая работа)
It was enjoying to watch this. Just a few question please. Where did you buy that caseback and how do you messure it to fit when you order? Thanks
Pimpi1980g
Caseback is off meranom.com
All Vostok Amphibia casebacks are the same size. So the one caseback will fit all Amphibias.
dear friend for the ladies one ? i mean 051 series ? does fit ?
After opening the amphibia, does it remain water resistant to it's original depth with that case back? Also if you've opened it before for regulation and put the original case back, would this compromise the seal?
The seal is just a big rubber gasket. The only way you'd compromise anything is if you physically damaged the gasket. Why they tell you not to open divers is because on a twist caseback you have the very small risk of getting the thin gasket chewed up by the threads. That's not a problem on a Vostok.
Anton Semionov отлично
Can you fit another movement on a vostok case? What size is the 2416 movement? Would be cool to see a vostok with a more precise machine inside
jefferson1232757 I know someone who got his watchmaker to fit an ETA, but he's keeping the details to himself.
Хорошо валокардин рядом был...
Good Video !
👏🏻👏🏽👏🏼
Я только заинтересовался этими часами- скажите пожалуйста, можно ли заменить стекло на сапфир? Продается ли подходящее?
Стёкл таких не бывает, и если честно то стеко (тем более сапфир) значительно хрупкое. Не зря практически все военные часы были с акриловым стеклом (от Ролекса до CWC). Акрил в разы более ударостойкее и легко полируется.
Уже есть корпус с сапфировым стеклом. Продаётся отдельно
были командирские стали амфибия. Вот это поворот!
Нет. Была Амфибия на которую установили не правильный циферблат. У Командирских корпус латунный а не стальной.
Hi, what is the music on this video? It's fantastic.
CrookedNose2131 A St. Petersburg based artist; WOODJU. Google "WOODJU Mix for FURFUR". You should get a SoundCloud result.
What's the technique of putting the crown back into the movement at the end so it goes in every time?
Its the same as putting the crown out
Do you really have to go through all that initial disassemble you did, just to replace the hands? Isn't easier to save all of that part and just take out the movement as one piece? Also, I think it's a good practice to use gloves in order to avoid all those fingerprints over the internal parts... and an air blower to avoid debris over the watch face and everywhere else
MFP 2241 On this particular movement you have to remove the automatic works gears to manually wind down the mainspring. A work of the 2416
+Anton Semionov Oh, I see. It's just that I remember I've watched another video on which hands were replaced without such complication and on the same movement...
MFP 2241 I've worked on other movements, and typically you can just hold back the ratchet and wind it down with a screwdriver, but in this case the gears hold it back.
Anton Semionov why not just pull the stem and remove the movement?
зря оставил пластиковую белую вставку - она не смотрится с большой мераномовской крышкой, виден пластик и это не айс. металическая проставка стоит 200р у меранома. я аналогично заменил на своей 090659 заднюю крышку и поставил прокладку из метала - смотрится гораздо интереснее! (в планах поставить нерж заводную головку от мераном)
Hár Veratýr Я стальное кольцо позже увидел на сайте. Буду заказывать со следующей партией от меронома.
Anton Semionov оно не стальное, латунь, по типу как безель стоковый (вроде сталь, а по факту облезает). Но внутри корпуса оно смотрится отлично!
Hár Veratýr Понятно. Я перепутал со стальными вставками от One.Second.Closer Ну если подумать то командирские тоже из латуни, и есть такие варианты которые с 80их не объездил, а кольцо вообще будет вечно спрятанно от элементов под крышкой.
That looked like open heart surgery, the way the movement was ticking away while you removed parts.
Q: Does the display back have the same water resistance performance?
Its one of my favorite features, but another is the 200m ATM tolerance.
Yes, the caseback is 200M rated.
Ну такое себе - часы были с датой, можно было найти цифер с окошком даты. И эта отвратительная задняя крышка просто ппппп....ццц. Подскажите какой размер приобретают часы с данной крышкой?
Мне с таким цифером больше нравятся. На Panerai похожи..
Есть квадратные корпуса, вообще будет в стиле Panerai.
Антон помогите с ответом пожалуйста) на видео первый циферблат с вырезом под дату - второй нет. Такая же ситуация у меня только дата на цифре 6 , хочу поставить циферблат без даты! Все делается так же как у Вас на видео.? Снял и новый поставил?
Да, всё один в один. Лапки на всех трёх типах циферблатов на одном и том же месте.
@@AntonSemionov благодарю за ответ 🤝🤝🤝
How tall does the watch sit on the wrist with this caseback? Is it much bulkier than the regular amphibia caseback?
Adds no more then 1mm in thickness. Stock is 14.5mm, this version is 15.5mm or so.
Good work... good music.
Зря закрыл дату в часах, с ней они выглядят дороже и лучше и всётаки полноценная работа механизма.
Топорно работаешь и неумело, торопишься. И кто тебя учил работать с механицескими часами намогниченными инструментами? И при установке уплотнитель ногой кольца, его нужно было промазать. И какой смысл делать часы без календаря, если изначально они были с ним? Это просто ужас.
Интересно, а чтоб заменить циферблат обязательно разбирать всё это?
Если механизм уже успел остановится, то нет. Просто снимаешь стрелки и заменяешь циферблат, но акуратно чтобы он от движения снова не пошёл.
@@AntonSemionov Понял, спасибо!
Why the heck did you take off the reversing wheels and winding bridge to change the dial? Makes no sense
Hamish Spencer Because on an automatic Vostok movement that's the only way to unlock and wind down the mainspring.
how big of a screwdriver do I need to remove rotor? I tried 1mm upwards that seemed too large :(
A Tóth I grind down my screwdrivers to a zero edge and then break the edge on very fine sandpaper so that is just the perfect thickness.
Le quítate toda la personalidad rusa e identidad militar al reloj. Quedando como un reloj común
скажи блок автоподзавода обязательно снимать? вроде же не мешал он. хочу попробывать разобрать часы поменять стрелки и цифер
TheMarkusrus
Чтобы поменять стрелки надо размотать пружину. А чтобы её размотать надо разобрать блок автомата. Дело в том что если на большинстве механизмов можно просто оттянуть трищетку и аккуратно пружину размотать, в механизме 2416Б если оттянуть трищетку то нечего не произойдет так как барабан держат шестерни автомата.
спасибо,не думал что высе так сложно я думал можно просто снять стрелки и поставить новые)
скажи еще пожалуста, а если часы встали и пружина не заведена то можно не разбирая поменять стрелки? не хочется разбирать блок апз, боюсь не соберу потом
Да, конечно. Я бы рекомендовал просто снять противовес автомата, чтобы
когда они разкрутятся, то ты случайно резким движением не запустил бы
автомат.
Главное это если у тебя часы с датой, то точно
выстовить время на не-идущих часах на 6:00 или 12:00, что тебе больше
нравится, чтобы потом точно так-же установить стрелки обратно, чтобы
дата переключалась в полночь.
Так-же хочу предупредить что на
механизмы Восток можно устанавлевать только стрелки для Востока или
обращятся к мастерам которые умеют модифицировать стрелки для работы с
Востоком. Это из-за внутреннего диаметра дырки в стрелках.
спасибо,про дату я уже сам понял ) циферблат от меранома будет стрелки моды.потренеруюсь на старых часах чтобы не поцарапать и все аккуратно сделать,если не получится придется к мастеру нести)
cool…with few tools
nice video! what do you think about this bezel on a 420 scuba black
dial?
meranom.com/en/amphibian-classic/spare-parts/vostok-amphibia-red-bezel.html
I know it will fit, but maybe this bezel looks a bit too big on a 420? what do you think? i was thinking about this and the same version in black. thanks!
I think it'll look great. Give it a bit of a Black Bay feel. These Meranom bezels are much lower profile then most aftermarket bezels, and the fact that the aluminium insert is pretty thin makes it seem smaller then it is.
perfect, thanks! I was afraid it looks small on a 420 ;) So i will go for a 420 scuba dude black dial, a good black silicon strap... and this bezel!Red or black I still don't know:)
Take your pick.
i.imgur.com/heb49i8.jpg
you are the best! it is perfect, red red red! :))) Where can i buy that rubber strap?I am Looking for one, i have a small wrist (15cm) not that easy to find. I wanted a bonetto but they are way too long for me... ps i subscribed to your channel :)
www.ebay.com/itm/Mens-Silicone-Rubber-Watch-Strap-Band-Waterproof-with-Deployment-Clasp-GS-/271336559371?var=&hash=item3f2ceb530b:m:mVHxl1o5C6KQBQEVAAOmCJA
This is the closest I could find visually.
Хоть бы ногти в порядок привел, позорник! И не видно ничего... Дизлайк.
Бабу свою учить будешь какой ей маникюр делать.
I tried and that case back really hurt the wrist
nice.
Great Video ,Except The Annoying Russian Elevator Music.Sounded like Rasputin on an Acid Trip talking to a cat.
А какой номер у этого циферблата на сайте меранома (659) ? Это обычный "серийный" циферблат или что-то уникальное чего скорее всего не появиться в продаже опять?)
Andrei Radchenko Номер не помню, помню только что он есть у них на странице Командирские 92. Я потому и поменял что меня бомбило маленько что у меня циферблат от Командирских на Амфибии.
Нашёл. Командирские 921307
Спасибо огромное! А он вроде как с глянцевым эффектом или матовый?
Andrei Radchenko Я бы описал как полу матовая фотография, но краска с эффектом металика.
Where did you buy mesh bracelet
mehtap aydın Random eBay listing from the UK for £8
Отличный Восток как и автомат Калашникова
why don't u just buy another one with that dial instead of going through all the trouble?
tuttkhan55 Trouble? What trouble? If you want to get different wheels on your car, do you get a different car?
1. A car doesn't cost less than a 100 bucks. A Vostok does, so you can easily buy another one. 2. If you want to use the "car" analogy, you did not replace the "wheels" of the car, you can say you only changed the "paint job" (dial), which can be a reasonable excuse only if the "paint" is damaged beyond repair, which, in this case, it obviously isn't. Don't get me wrong. You did a great job changing the dial, something I wouldn't know how to do myself, which in my case, would be a lot of "trouble".
tuttkhan55 Removing a dial is a five minute job.
I can see that. I'd like to collect different dials myself, but I just don't have the skill that you have, nor the patience. So I guess I'd just have to save up to fuel this Vostok addiction. I just wish someone on ebay sold just the watch head itself, minus the strap and bezel. That would save me a lot of money.
Красавчик. Превосходно!
Прставочное кольцо на металлическое заменить бы. На Мераноме есть. Пластик не очень смотрится. В остальном на любителя.
لذي ساعة فوتسوك اريداصلاحها من فضلك
tried to remove the bezel once and left a huge scratch. never doing that again
DarkAnti I use the large flathead on my Victorinox because of the polished edges and the large surface area. It also helps to gently click it off instead of prying it. Try to feel what the spring is doing as you work.
Anton Semionov thanks
I just put a tissue or something like that between the knive and the watch/bezek and no chance to scratch, really simple
Красивая работа.
Kak eto pesnya nazivayetsa?
В описании к видео всё написано.
@@AntonSemionov lol srazu ne posmotrel, spasibo. Ya tozhe nedavno zdelal mod na vostok amphibia no, ya dial ne menyal.
@@AngryMuffin Я бы и не менял, если бы меня не мучал тот факт, что я купил Амфибию с циферблатом от Командирских.
@@AntonSemionov lol da, ya Sam me ponyal pochemu tam napesana bila komenderski kogda sami zabchyasti ot amphibia. Ochen strano
Такой безель, может быть, и придает некоторую "крутость", однако, ИМХО, убивает в часах русский стиль, за который их так любят за Западе. Натуральные часы, как мне кажется, выглядят мужественней, брутальней. А у вас получились как заурядный Ролекс.
Классно сделано,автор молодец!)
Перчатки надо одевать)))
Можете ссылку на безель такой дать ?
Зелёный от One.Second.Closer. Его имя в Гугл забить, и его страница eBay должна появиться. А красно синий это просто оригинальный от Seiko SKX. Просто так в eBay и забить; "Seiko SKX009 Bezel".
@@AntonSemionov оригинальный спокойно встаёт ?
goodbye date dial :(
When you have twenty watches on rotation and the Amphibia doesn't have a quick-set date, no date window can be handy.
OMG...touch at the Dial with pure fingers. Here you can see how not to do it. You should also buy some good tools. Touch the hands with pure fingers too. Terrible
Hacking Second?
No. Vostok never had hacking.
+Anton Semionov is there a modding for that?
All I'll say is that I know somebody who's in possession of a 420 Amphibia running on an ETA movement. It was a custom job from his watchmaker. I won't say any more.
ETA 2824-2 ?
He didn't want to say and I didn't push.
Не пел давно и спел говно. Изначально было интереснее, чем стало.
За себя я скаажу что были "Командирские", а стали как и должны "Амфибия". А за тебя скажу: если изо рта говно валиться, то не пой. Жить проще будет.
@@AntonSemionov слово « валится» следует писать без мягкого знака. Перед « что»надо ставить запятую, а « как и должны» надо выделять с двух сторон . И ногти почистите, а то некрасиво выглядит.
What's the technique of putting the crown back into the movement at the end so it goes in every time?
Apply inward pressure on the stem with the tweezers, and align the lugs with your fingers by applying outward pressure on the crown.
Ok I think I know what you mean. Don't you press the crown release button when your putting the crown back in?
@@Barnaby_bo Literally how I do it in the video. Apply pressure with the tweezers and spin the crown back and forth. Basic as that. It's a Russian watch, it's simple.
K thanks. I've been doing it by pressing the release button. 👍
Tried it. I found just wiggling the crown around gets it in. Can't believe I never tried it until now. Thanks for the help