Это видео недоступно.
Сожалеем об этом.
HOW TO: Color matched Ford Badges and F150 Emblems! 2020 F150 Full Color Match
HTML-код
- Опубликовано: 13 авг 2024
- Color matching Tail lights, 3rd Brake Light, Ford Badges, F150 Emblems, and Rain Guards for a Iconic Silver 2020 F150
This is for sure one of the best DIY videos I’ve seen in a long time!! Such a great job man! I’d love to see how you do tail lights!
Thanks I appreciate it! I have a DIY video on tail lights as well, go to my channel and scroll down to Justin's Customs Playlist and you'll see a how to on silverado tails!
Thanks for the Lesson brother. I'm about to go do mine now
I love the color! My F150 is way older than yours….but I did my emblems a little over a year ago but they recently started chipping so I’m going to do some more to replace them.
Oh dang sorry to hear that! Best thing to prevent that with these emblems is to scuff all the pieces to a nice dull finish and I like to spray adhesion promoter first, then self-etch primer, then sealer before applying the base coat to it all, just to be sure there's a good bond, hope he second time around is a better result!
Damn!! Good job!
Just found your channel great work. Learned alot of little things that are going to help me with my 85 Bronco. One question though. When are you getting a Bullnose Bronco?
Thanks for the support! And one day we're always looking🤣 I would love a bullnose lol
Amazing and very helpful video thanks a bunch and you have a new sub
Thanks for the support!
Underrated video, well put together and deserves 100k views
Much appreciated!🙏
Nice work. Looks great.
Thanks!
What steps prep do you take for painting on the chrome and blue finish of the emblems? Thank you! Great video!
is there any sort of disassembly on the taillights or did you just tape the clear parts off?
No disassembly at all, I just masked off the clear spots and painted over the rest
Did you just sand the plastics and the paint and clear them? Or did you use any type of primer?
I scuff them up and put down adhesion promoter first, I don't use any primer I put color right over the red lens so it still shines through the paint
Talented…
Silver surfer
For the third brake light and tail lights can you still see the brake lights well?
Yes you can see them just fine actually! The park lights are visible no problem and the brake lights are still nice and bright even in the daytime, I have another video I did on a silverado I show how visible the lights are through the paint if you want to check out
do you have to take the entire inside of the door out in order to get to the side mirrors? Im looking to paint match them but i cant see any other way to get the mirrors off
Depends on the year, this body style there's a corner piece at the top of the door panel that comes off seperately to gain access to the mirror nuts, but for the 09-14s you have to take the whole panel off
Can I get some information about the wheels?
So i have a 2001 F150 Harley edition. Do you have any clue if the emblems are the same size? Or if the older emblem seperates like that? I'd like to either swap em out or color match the originals.
Honestly I couldn't tell you without seeing it in person but I would think they come apart the same way
what paint did you use?
Does the owner of this truck an Instagram or anything? Awesome truck! Simple yet clean!
Yes he does! His Instagram is @dill_lovejoy11, the tail lights weren't too bad to do just have to sand/scuff them down and take the time to mask them off perfectly. I usually just do 2-3 coats of color, just enough for the red lens to be covered and thats enough, thanks for the love!
He did not show any of the emblem removal, paint prep, clearing or installation.....just took them apart and put them back together again. The only real detail is in how to super-glue two pieces of plastic together.
Looks good. Does the super glue hold up?
Sure does, once it's glued together and on the truck it can't go anywhere
What happened to the prep portion of the video? I want to see the whole process.
I didn't film the prep portion because it was very quick, I just hand scuffed them with a red 3m scuff pad until they were a dull finish. Then I spray with adhesion promoter, self etch on the chrome, and then sealer, base coat, and clear
What wheel tire set up is that it looks badass
It's a 285 on 22x12 Tuff wheels
Any problems with the light output of tailights?
They are dim but he hasn't had any issues getting pulled over or anything. To help you can get LED bulbs, my dad put some in his tails I did for him and it helped a ton, no visibility issues at all
Did you paint over the red brake lghts?
Yes I sprayed the paint and clear directly over the red lens on the tail lights, with doing 3 coats of color it is just enough to cover the red while also being able to see the brake and park lights through the paint. I have a tutorial video on a 2018 silverado I did as well, feel free to check it out!
Can u make these for me. Same color.
Very interested customer.
If you can, DM me on Instagram @jhager76 or Email me at justin.hager76@gmail.com
Where were the tail lights perched?
They're oem tail lights I color matched as well
What paints did you use?
Professional automotive paint sprayed through a paint gun, I used rustoleum adhesion promoter as well before spraying everything plastic
Did you just sand the plastics and the paint and clear them? Or did you use any type of primer?
After sanding and wiping everything down with wax and grease remover, I spray adhesion promoter before anything, then I spray primer sealer, and then I spray the paint and clear