2024 Ninja ZX-6R Break In Oil Change - 1000KM/600 Miles

Doing the first oil change for my break in on my 2024 ZX6R
CBR BANDIT LINKS
linktr.ee/cbr....
CBR Bandit Affiliate Links:
👕 10% Off RAVENMOTO Code “CBRBANDIT” - www.ravenmoto.co/?ref=cbr.bandit10
👕 10% Off Speed and Strength Canada Code “CBRBANDIT” - www.ssgear.ca
👕 10% Off Not Track Gear “CBRBANDIT” - www.nottrackgear.store/en-ca
Firmoo - 50% off code “ NMQS50” - www.firmoo.com...
Insta360 Ace Pro & Insta360 Ace - www.insta360.com/sal/ace-pro?INR151F
Ride at your own risk. CBR Bandit disclaims any liability incurred in connection with the use of the concepts outlined on this channel or videos, etc. You alone are responsible for your own safety.
#motorcyclemaintenance #oilchange #zx6roilchange #kawasakizx6r #zx6r #diy #contentcreator #motorcycle #breakinperiod

[@tripledoublestuff]

FYI...On the K&N filter, the hex is only there to remove the filter, not to torque it. If you use it to torque the filter you can crack the spot welds that hold the hex to the can and the filter could leak.

[@ksrbot]

i now know how to change the oil on my 2024 zx-6r

[@ReigningSpirit]

Of you tilt the bike to the brake lever side you can get a lot of oil out of the filter. I used to have a cage on mine so I just rested it on that for a few minutes to drain and it minimized the mess.

[@phantomraven5044]

The video, the new parts, the sentences, the techniques is almost identical to Bikes and Bangs video.

[@NinjaThrottle]

Keep Going Brother 👍

[@FoolishTunings]

i appreciate them making it so you don't have to remove any fairings, but my god that filter location soaks my garage every time.

[@CBRBandit]

Leaving the pan or something under makes less of a mess lol but still a little drip

[@FoolishTunings]

@@CBRBandit I left the pan under the tin foil for the filter and it drips through the block and onto the ground haha. Need to put two pans next time.

[@CBRBandit]

@FoolishTunings lol things never work out the way we want them too

[@williamhazelwood8288]

Choice, hoping to pick up mine next week.. just arriving to new Zealand now been a long wait. What tank pads are you using

[@CBRBandit]

Puig clear tank pad
Graves clear tank grips

[@apieceofreese48]

pull off the front sprocket cover and spray the oil off. kawi dumb for doing that with the filter lol

[@CBRBandit]

I like the location because it's not right over the headers like the gsxr but still slightly annoying

[@apieceofreese48]

@@CBRBandit i much prefer it over the headers like every other brand has done for years. spray some brake cleaner on the headers after an oil change and good to go. these things you get oil all over the front sprocket area then you gotta pull off so much junk just to get to where all the oil is.. zuke on top.

[@natvega1]

When purchacing a new bike I wouldn't wait until 600 miles, you don't know what those chinese put in that shipping oil from a barel, most professional sale shops won't even sell you the bike without a presale prep which includes changeing the manufacturers shipping oil..... The first ride home I would imediatly change the oil, then again at 300 miles, then again at 600 miles, then every 800~1000 miles after that. Starting off with Valvaline 4T conventional motorcycle oil then moving on to a synthetic blend after 2 or 3 thousand miles. Most sportbikes will degrade oil within 800 and 1000 miles unless you always ride under 6k rpm....😮