This is great. Just bought a boat with a rebuilt Yanmar 2GM20 that was converted from raw water to freshwater cooling, and this really helps me understand my engine better. Thanks!
If you have a hand cranking handle it is worth priming the system manually first by turning the engine over by hand. The priming lever on the fuel lift pump usually only pushes the fuel as far as the filter on the top of the engine. First make sure the engine is decompressed. Next loosen the two banjo bolts on top of both injectors and turn the engine over by hand until you see diesel weep from the top of the injectors. Nip up the banjo bolts again and 're-compress' the engine by pushing both levers towards the alternator end of the engine. Adjust the throttle to about 50% and turn the engine over on the starter motor. It should start within a few seconds but if not, repeat the bleeding procedure to remove any further air. Good luck!
This is great. Just bought a boat with a rebuilt Yanmar 2GM20 that was converted from raw water to freshwater cooling, and this really helps me understand my engine better. Thanks!
Nice sound! Miss my boat.. :-(
putt-putt = cheap cheap , I like the hand crank spot too
Does this sound like it has a knock ?
super Sir,is it useful for agricultural equipments?
only two but like my ...never stop
what did you do to start it? you did not show us. i am ready to bench start mine (f) and would like some starting and setup details. thanks
If you have a hand cranking handle it is worth priming the system manually first by turning the engine over by hand. The priming lever on the fuel lift pump usually only pushes the fuel as far as the filter on the top of the engine. First make sure the engine is decompressed. Next loosen the two banjo bolts on top of both injectors and turn the engine over by hand until you see diesel weep from the top of the injectors. Nip up the banjo bolts again and 're-compress' the engine by pushing both levers towards the alternator end of the engine. Adjust the throttle to about 50% and turn the engine over on the starter motor. It should start within a few seconds but if not, repeat the bleeding procedure to remove any further air. Good luck!
@@frankjones5207 it looks like you used a screwdriver to short across the solenoid? thanks for your good reply
do you know where you can buy a yanmar 2gm20 raw water pump? I have searched everywhere and cannot figure out where to get one.
depco pumps ...fla. look online
Such a big motor for about 16hp. I bet it sips diesel though.
1l hr
nice engine👍👍👍how much of price..??
Donde puedo comprar uno igual
bizde aynısı var süper
Where place is engine sale?
How much
Is this available?
Nice 👍
For sale?
ประเทศไทยมีขายหรือเปล่าครับ
Put more oil on engine
perfect
con này bao nhiêu tiền vậy bạn ơi
Berapa harganya?
How much pleas
nice 8-]
WHAT IS THE RPM
generally engines like this is governoured to 3600rpm, the industry standard for these types of engines
😍😍😍😍😍😍😍👍👍👍👍👍👍👍👍👍👍👍👍👍👍yanmar
It would work better in a boat
piss off
18 hp actually
اخي ابو القنات دزلي رقمك
Quero adquirir um 3ym30, turbinado,
Уотлично
nhìn phê quá
ขอราคา
where to inquire..
วาวดัง
Just to say - you should not run a diesel marine in neutral.
why not??
who told you that ??? lol
For sale?