Это видео недоступно.
Сожалеем об этом.
Adjusting settings on a 60-in-1 arcade PCB
HTML-код
- Опубликовано: 22 май 2015
- This is a small video on how to adjust the settings on the 60-in-1 vertical PCB.
The main thing is to turn off the machine, adjust dipswitch 4 on the PCB and turn on the machine. This brings you into the settings where you can do general settings and game-specific settings that would normally be done on the original arcade boards.
By disabling all games except one, you can make the arcade jump straight into the game once you turn it on and therefor skip the game-selection screen. This makes the game experience a lot more authentic.
Another setting which comes in handy is the Volume of the system which is found as a physical potentiometer on the board. Just use a small philips/cross screwdriver and turn it to adjust.
Great video!
Can you tell me where to get that power switch box that the power supply is plugged into?
Thanks!
I just picked up a Gorf cocktail cabinet that has been gutted and basically is now this multicade board instead. It doesn't have the S2 or any control button interface. Just game control buttons/joysticks. I can get into setup by flipped dip 4 on but after that it says press S2 but I have no S2 button. Is there a way for me to traverse the setup menu with the normal game controls? None of the buttons nor joysticks register when on that initial setup page saying press S2.
@@mrjinxzz Thanks so much, this comment pointed me in the exact right direction! I was at least able to enable some games that were turned off and adjust each game's settings. Woohoo! My only disappointment is I thought you could customize the game menu itself. Apparently you can't. It reads "Happy Hours" in the most disgusting rainbow, shadowed font with a grey-ish background. I bought this cabinet from an old arcade bar assuming they had customized that. But apparently that's just part of what's built into the jamma board itself, not customizable. Let me know if I'm missing anything. Thanks again for your help!
Man gorfs my favorite game
did you ever get this resolved? it appears the response message is gone. I have the same situation as you. I can flip dip4 and get the screen that says push s2 but i don't have an "S2". Any help??@@TimStiles
@@JeffYPbPr Gosh it's been so long since I fixed this situation, I can't remember off hand exactly what I did. Thankfully I did find the reply from @mrjinxzz to my original comment in the YT email notification I received when he replied. Here you go, hope this helps. I think I did what he said and hooked up a separate button to the correct jamma board harness points:
"Hi Tim, check if you can add a wire to your wiring harness that adds button 2 (and 3). You can simply find a "jamma pinout" on the web to find which spots on the Jamma need to be wired up. Connect a button to Button 2 and button 3 and add the GND and you're good to go."
I have a 60 in 1, and a 19 in 1 board that both boot up to the menu and play the music, but they don’t respond to the buttons. Are they bad?
Wondering how to adjust the volume on this
@@mrjinxzz Thanks a bunch, been trying for the longest. Fixed my issue. 👍
Can someone help me? I purchased a 60-1 Blee and i seem to have wired it correctly as the lights flash solid green after power up and blinking green on the second light but the games never seem to start up. It always boots to service screen and I have verified that the dip switch #4 is off and not in service mode. I have two of these boards and it seems to be doing it with both boards. I also have multiple harnesses. One player and two player harnesses. Please Help, thanks!!!
Birşey sormak istiyorum.bu orjinal jamma boardin yerine gelen bir ürunmü? degilse günumuzde yerine gelen bir urun varmi?pandora box kesinlikle ayni kalite degil.ilginç 30 sene önceki kaliteyi yakalamayimiyoruz.orjinal jamma kartinin tepkimesi hicbir kartta ve emulatorde gormedim.siz biliyorsaniz yaridmci olurmusunuz?
I bought a machine that had this 60in1 board. I they had it to only play donkey Kong jr. I changed it to play others but now it only does previews. How can I fix this?
Is the demo music the one that sounds like "all summer long" by kid rock?
How do I get rid of the contrast and brightness settings that randomly pop up?
Don't have S2 button on my Popeye machine with 60 in 1. Where or how did you wire up 2 extra buttons? Any instructions link?
If you check online for "jamma pinout" you will find the pin layout on the big blue jamma connector. You should be able to trace the wire "player 1, button 2" and connect a button to that wire and one ground wire.
Hope that helps.
Hi just about to fit this 60in1 in my Pac-Man and it only has player 1and2 buttons do I only need to add 1 more button like yours to play all the games because I herd that some of the games need 2 buttons ? Is this true or false ? Thanks ,great video by the way 👍
I'm not 100% sure which game uses 2 buttons but I'm sure that some do. It might also be needed to navigate the menu (S1, S2)
@@mrjinxzz I’ve took the plunge and fitted 3 buttons just to be in the safe side lol
Do you know if this the Rev B version - I noticed on the service menu, you have to press S3 to go back, I think they changed that on the B pcb?
I have this in my arcade machine, but flipping the 4th switch doesn’t seem to do anything at all, it just starts up same as it would without flipping the switch.
@@mrjinxzz Yeah, after closer inspection, the pcb isn’t the one in the video. It has the same games listed in the same order and the attract screen is identical. I don’t have a manual though because I got the arcade machine from my uncle who was throwing it away. I might replace the pcb with this one so I can adjust the settings and such. The volume is the main thing that’s bothering me, it’s so loud! 😂
Do you figure it out I have the same issue
@@manuelhinojosa2319 I had a different (but very similar pcb) so this video Didn’t really help me with it.
Thanks
How did you get it to work ? I'm thinking of getting a 60 in 1 board from Amazon and see what happens
There is function for horizontal screen? I no have vertical monitor
The 60-1 is vertical only. If you prefer horizontal there are a lot of alternatives. Besides all the Pandora's boxes you can choose a 19-1 pcb which runs horizontal games but to be honest it only runs 2 great games in my opinion.
@@mrjinxzz It s ok.what is thè function in menù for to continue a game?Just finish game goes in menù soon.i no undestand this menu many confusion
Great video . Do you know if you can navigate the menu with just a left right joystick . Such as Galaga ? and if you only select 1 game will that game attract mode keep playing when the game is done
@@mrjinxzz exactly what I wanted to know ! Thank you
@@mrjinxzz I guess I can wire 2 buttons for up and down and leave them in the cabinet for when I need to navigate through the menu
Thank you,this was exactly what I needed.
Is it possible to add both players on 1942 to free play? If the second player dies, it says insert coin, and pressing start does nothing.
mrjinxzz im not sure how its configured but the guy who set it up for me has it that if the 2 player button is pressed it will always start the game in 2 player mode
I have this board in my DK cab. I found this tutorial really helpful for booting straight into DK but I have an issue. My high score from a long while back of 87,900 is saved on there and whenever i score more (for example I just scored 111,200) the score disappears when I turn off the machine? Is this a bug / setting? Or has my DK (1) gone corrupt?
My previous score of 87k remains no matter how many times I turn off the cab but no higher score is saved.
Would really appreciate any help.
Toby
What you need to do is write your new high score down on a sticky note and paste it on the top part of the screen then your new high score will be saved for the next time. Then just repeat the steps given here. Simple! Have a nice day! ;)
Glenn Brown thanks for the suggestion but last thing I want to do is cover my beautiful cab with sticker residue haha
Make sure DIP #3 is turned to "ON" to enable high score saving. It's the little blue bank of four switches, and you'll need to power cycle the machine after turning it on for the system to recognize the change.
can you have continues when on free play ?
mrjinxzz how ? I was looking through my menu and I turned on continues on the games that have it. But when I play the game it won’t let me continue. Once your game is over it just sends you back to the main menu to select a game
I have the cocktail game version. it have the same menu as this video. Arkanoid is the main game I wanted to continue on. I enabled continues but if you are on free play it won't let you. It says " Hold the fire button and insert coin to continue " but my machine doesn't have the mechanism to insert a coin and it be counted
Thanks man, I'll try this
I did as you recommended but still can't continue on the games that have continues available, even if there is credits in the machine. Do you know how to fix this ?
When I insert a coin the main screen shows multiple credits but once you select a game it only shows 1 credit. If you add more it doesn't count them@@mrjinxzz
yes enable them in settings
example dig dug continue to on
Awesome video!! For some reason when I plug in my arcade it plays music and non of the controls work. Do you know how to fix this? 😢. Would so appreciate at it ❤
Check if you have your gnd wire connected correctly. It's the black loom that should be connected to every button.
If you have 3-prong switches, check if you have the correct 2 prongs connected.
where did the s2 and s3 come from? I have a ms pacman arcade stand up.
we've built the cabinet from scratch so we have placed the buttons ourselves. I guess your cabinet is an original? In that case it does not have the 60-1 PCB
I put the 60 in 1 in my machine last week. got it working and plays well, but I did notice that in test.setup it does ask for sw3 but I don't know what it takes to use it.
you might want to check this wiring diagram to see if button3 (SW3) is wired to anything: japanamusement.altervista.org/images/image012.gif
Mine loads up to S2...But when I hit S2, nothing happens. S2 works in the game..Weird..Posting in case I am doing something obviously wrong! :)
hello, question, how can I change setting if I don't have those buttons?
simply dont wire the buttons and install the board where you can reach the dipswitch through the coin door. You don't need to wire the test buttons. Also make sure you have the power switch easily accessible through the coin door too lol.
spyralspyder hello mine doesn't have a power switch on the outside. It's on the inside but it doesn't work, you have to unplug it. Seems like switch 4 on the dipswitch doesn't register either. I've heard you can access the the settings menu by holding the test button when you power on( in my case plug it in) will it still work? What is a test switch and what does it look like?
A test switch is wires for easy access through coin door but u don't"need" it unless it's a big machine u don't wanna move away from the wall to get to the board. I have my board wired to a power strip.
U should be able to unplug...flip up dip switch 4 then plug in and it should boot to test.
Hi how do you adjust game machine volume
yeah on the board is a small yellow or orange potentiometer. Just grab a small screwdriver and turn it to adjust the volume
move dip sw 4 to on
power up the machine
press s2 (next) about 50 times to get to very last screen
use the joystick left right to adjust volume
press start 1
turn off the machine
move dip sw 4 to off
turn on the game.
method 2 turn the small yellow knob on the circuit board w a small phillips screwdriver
Dear Sir I speaking from Bangladesh. I am a arcade gaming business man. I have a couple of video game shop in my city. My gamer is fell bore to play of pandora or those similar game. So I need to some new multi game with jamma pcb accordingly. In fact neo geo, capcom, konami or other jamma pcb platform has not attract the new generation gamer. So i need a new gaming jamma pcb board like Fifa 11, 12 or 13, need for speed underground, tekken 6 or 7, house of dead 2, call of duty like others. So is this possible to make a jamma pcb board on these game for business? may be those game will be format a arcade version mode. because my all gaming machine was build with arcade cabinet box system. so let me know sir, can you make my new game in jamma pcb formet. its busness purposes for based each player can play coin system.
@@mrjinxzz thanks sir
Is this for sale?
You can find them on the internet as 60-1 arcade classics PCB.
2 buttons ? Are u insane ?