How to Replace Blower Motor 09-14 Ford F-150

Поделиться
HTML-код
  • Опубликовано: 14 ноя 2018
  • Buy Now!
    New Heater Blower Motor with Fan Cage from 1AAuto.com 1aau.to/ia/1AHCX00322
    1A Auto shows you how to repair, install, fix, change or replace a bad or broken blower motor. This video is applicable to the 09, 10, 11, 12, 13, 14 Ford F-150
    This process should be similar on the following vehicles:
    2009 Ford F150 Truck
    2010 Ford F150 Truck
    2011 Ford F150 Truck
    2012 Ford F150 Truck
    2013 Ford F150 Truck
    2014 Ford F150 Truck
    🔧 List of tools used:
    • 7mm Socket 1aau.to/oQC/1AXAA00017
    • 8mm Socket 1aau.to/oQC/1AXAA00017
    • Ratchet 1aau.to/o4n/1AXAA00016
    Subscribe: / @1aauto
    Check out our playlist:
    Ford F150 2009-2014 12th gen: • Ford F150 2009-2014 12...
    Ford Auto Repair Videos: • Ford Auto Repair Videos
    For More Info visit us at 1aau.to/h/ajc/
    ⚠ DISCLAIMER:
    While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии • 139

  • @1AAuto
    @1AAuto  3 года назад +7

  • @michaelrogers9072
    @michaelrogers9072 Год назад +46

    I'm no mechanic but I was done start-to-finish in less than 20 minutes. Making sure I had the right tools ahead of time makes all the difference. Thank you!

  • @kyleloew432
    @kyleloew432 3 года назад +15

    A lot of time the motor sounds bad but it isn't, a part on the blend door breaks and falls in the motor, more common than the motor going bad.

  • @zvjezdanamartella3287
    @zvjezdanamartella3287 Год назад +2

    It' s much easier if you pull back the layers of carpet and padding, Dont need to remove them. Much less struggle

  • @RBoas
    @RBoas 2 года назад +16

    That back screw is, no joke, the hardest part of the job.

  • @imrickjames98765
    @imrickjames98765 3 года назад +4

    That accent though....

  • @johnhao3464

    Good video, I completed this project from the video, lemme just tell you Ford has the absolute worst engineers whoever decided to put it in this position, had me cursing at myself for an hour

  • @awshelley
    @awshelley 2 года назад +5

    You’re fast. Took me a considerable amount of time longer than 7 mins

  • @jtc1233
    @jtc1233 Год назад +1

    EXTRA TIP! Take off the fuse panel cover on the side and pull the carpet back a bit once you're ready to take it out/replace it.

  • @thehoodadventures602
    @thehoodadventures602 Год назад +1

    This is the same thing for a 2014 f150

  • @bobhajvert2210
    @bobhajvert2210 Год назад +1

    Clean the evap coil while the blower is out!!

  • @glennwhitt-hs7rh
    @glennwhitt-hs7rh Год назад +5

    You guys are the best ! Especially this lady because she's very detail oriented and thorough and fast, the absolute best ! Thank you.

  • @cameronforeman1043
    @cameronforeman1043 Год назад +5

    I think I’ve learned more from Sue than my actual instructors when I was in mechanic school!

  • @TrevynPlays
    @TrevynPlays 2 года назад +8

    Thank you for the video. I am not mechanically inclined but was about to get it done because of this video. It was a pain to get the new one in but got it done no more blower motor sounding like a jet taking off lol. No to mention my dealership wanted to charge me $525 for parts & labor smh. I got the part for $170 saved myself $355 that is a lot of money with everything going on in our world today.

  • @stevenvasquez5599
    @stevenvasquez5599 4 года назад +1

    Bought the blower motor for $100 bucks followed ur directions and saved alot of $$$ ! Thanks!

  • @dccowboy33
    @dccowboy33 4 года назад +11

    great video. Thanks for these. I was imagining a nightmare of twisting my hands into knots and this was super helpful.

  • @Dhi-fe5eu
    @Dhi-fe5eu 3 года назад +4

    I was thinking I may have to take it to the dealership to get it fixed. But this looked somewhat easy. Like u said, be patient. Great video like always.

  • @never2late454
    @never2late454 2 года назад +1

    Very thoughtful for this video. Doing diagnostic on a 2012 f150 and determined it was the blower. Will definitely buy from you.

  • @LOUDROWDSTROUD
    @LOUDROWDSTROUD 5 лет назад +12

    Great video!! Thanks so much for the video placement and quality. Your explanations are simple and to the point, and I love how you showed that you tried different tools. Well done!! Cheers from Innisfil Ontario Canada!!

  • @devinthomas4866
    @devinthomas4866 Год назад

    Replaced the switch and the blower motor. Not a technical job but a tight spot to work in.