I have to say thank you Nigel. Not a lot out there on this build. I was a little nervous about this kit coming off a Bully 2. Your tutorial put me over the top.
I was going to build this - Then RC Timer released the Yue One V2 RTR already built so my lazy ass ordered one. I am still watching your build video - thanks for making it!
Hi first than nothing 👏🏼👏🏼👏🏼👏🏼 for the nice build. A little question please. For the 40 or 80 amp esc combo and 4S battery, I need a "special" receiver ? Thaks 😊
Great information. The only thing I did different than you is not shave the end of the drive shaft, remove the c clip from the axle. What do you think??
Hi Nigel, I bought the rims, but due to inexperience I didn't buy the hex hub. There are six different sizes: 6mm, 10mm, 12mm, 15mm 18.4mm, and 22mm. What size should I buy to fit the wheels in my Rhino Crawler that is the same as the one in your video? The kit does not include the four hexagonal hubs. Thank you and sorry for the inconvenience.
Lovely build,i have one of these chassis and shock kits,which i am going to use for an moa build,just one question on the long links how far in did you bend them as i cant find out where to bend them
Hi, I'm starting to assemble the car, I wanted to ask you if it is necessary to put grease in the transmission shaft and in the transmission gearbox. Thank you
It helps run smooth and prevents damage from moisture. The gearbox is supostaby pre greased. The axles did have a small amount in. I just went on the safe side
Thanks for your reply, but then if I still have to buy them, I'll buy them 3S or 4S and what's the difference, advantages and disadvantages of a 3S VS 4S. Thanks bye.@@nigelbellwood3725
Hi fiesta yhan nothing 👏🏼👏🏼👏🏼👏🏼 for the nice build. A little question please. For the 40 or 80 amp esc combo and 4S battery, I need a "special" receiver ? Thaks 😊
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I have to say thank you Nigel. Not a lot out there on this build. I was a little nervous about this kit coming off a Bully 2. Your tutorial put me over the top.
Thanks please subscribe and watch my other videos on the rhino
Without even finishing this video I want to thank you.
You're very welcome!
I was going to build this - Then RC Timer released the Yue One V2 RTR already built so my lazy ass ordered one. I am still watching your build video - thanks for making it!
Hope you enjoy it when you get it
A pleasure watching you build this awesome rig, thank you sir for the awesome video.
Glad you enjoyed it thanks for watching
Amazing model, excellent work my friend!🤩💥💯😃👍
Thanks
Hi first than nothing 👏🏼👏🏼👏🏼👏🏼 for the nice build.
A little question please. For the 40 or 80 amp esc combo and 4S battery, I need a "special" receiver ?
Thaks
😊
@@LuisGarces1972 no normal receiver is ok
Great information. The only thing I did different than you is not shave the end of the drive shaft, remove the c clip from the axle. What do you think??
Never thought of doing that but if it works can't see a problem
Hi Nigel, I bought the rims, but due to inexperience I didn't buy the hex hub.
There are six different sizes: 6mm, 10mm, 12mm, 15mm 18.4mm, and 22mm.
What size should I buy to fit the wheels in my Rhino Crawler that is the same as the one in your video? The kit does not include the four hexagonal hubs.
Thank you and sorry for the inconvenience.
Hi I have 15 mm in the rear wheels but run brass weights in the front
nice build👍
Thanks
What size/pitch pinion did you use? Happy with it?
Sorry can't remember what size it was but it was just the standard one that came with the gearbox. I get plenty of control out of it
Pretty sure its a 7T 5mm bore out of the box
Does everything comes in This kit for the build ?
I built mine before kits were available but you can get almost a full kit from RC timer. Thanks for watching
Lovely build,i have one of these chassis and shock kits,which i am going to use for an moa build,just one question on the long links how far in did you bend them as i cant find out where to bend them
45 mm from end and about 120 degree
@@nigelbellwood3725thank you for your help
Hi, I'm starting to assemble the car, I wanted to ask you if it is necessary to put grease in the transmission shaft and in the transmission gearbox. Thank you
It helps run smooth and prevents damage from moisture. The gearbox is supostaby pre greased. The axles did have a small amount in. I just went on the safe side
@@nigelbellwood3725 Thank you for your help. Have a nice weekend
Would a hobbywing fusion pro motor fit?
I have seen some builds with them but the motor sticks out a bit at the bottom
@@nigelbellwood3725 thanks for the reply mate!I just got mine in the mail today im about to try to fit it..😊 really enjoyed your videos!
@@ztmanalansan1512 thanks
Hi! Nice kit. All kit is from Aliexpress?
Thanks Yes AliExpress
Where did you get the wheels?
Just search on AliExpress
Is this possible to migrate a scx10.2 on this?
Not sure if the gearbox would fit but you would need new links
I have bend links and I can make the length the same 313
Hi, can you tell me which battery to mount on this car, 3S or 4S and how many mA. Thank you
I run 3 s 850 or have run 4s 850
Thanks for your reply, but then if I still have to buy them, I'll buy them 3S or 4S and what's the difference, advantages and disadvantages of a 3S VS 4S. Thanks bye.@@nigelbellwood3725
To tell you the truth I didn't notice any big difference between them. The 3s are cheaper
@@AntoninoVasta 4s opens up the door to some very powerful servos.
Hi fiesta yhan nothing 👏🏼👏🏼👏🏼👏🏼 for the nice build.
A little question please. For the 40 or 80 amp esc combo and 4S battery, I need a "special" receiver ?
Thaks
😊
Did you bend the links or did they come that way?
You have to bend them yourself. It is easy to do