Do you use a gate in your chain? Have you used the double gate technique before or are you doing it differently? Leave a comment here and then go tell Glenn you saw me touching his knob.
I use 2 gates. It's easier to control the preamp and guitar noise that way - I use a cheap mooer gate for preamp noise and an ISP Decimator for guitar noise. I used to run the Boss NS2 in the 4 cable method but it was very limited in it's useage.
So... what else is new? I thought this was something else. I've been using the double gate technique with my NS-2 for almost 20 years. Although I just "lost" 10 mins watching the video I'm still going to tell Glenn that I saw you touching his knob. ; )
Same...for years. An ISP Decimator II (into an EVH 5150III 100 watt Stealth) with an MXR 10 band EQ (black) and another Decimator II in the loop, linked together with the first one).
This is called key gating. It's not 2 gates it's just using the far more dynamic input signal to "tell" the gate when to open and close. A studio technique employed for decades. I love the pedal concept though. Fortin and others have done it too. Honestly, almost no other gate design should exist at this point. Although a key filter would actually be a really good idea on these too.
You are reeealy good in explaining and showing, also video length, joking and going in depth. Also on other vid's like locking tuners and so on. Just wanted to let you know, because it's hard enuff with a granny like that...
When he said "why would a bass player use a gate", that shit hurted. And it hurt even more when I realized that I have 9 pedals on my board and no noise gate.
I've used many noise gates with Blackstar amps. None really worked well , either I still got noise or too sudden of a signal cut off, signal slap.... that is until I found the TC electronics Sentry... Best Gate I've come across. Works like a charm with a strat
And why the fuck didn’t you tell anyone? You thought you can get away with this secret for the rest of your life? You do the hell do you think you are?
Hello Trey, great video! Have one issue that's pissin' me off: how to properly connect the noise gate into a looper switcher with 4 cables method and no amp fx/loop (i don't have fx/loop, is all in front of the amp). My current chain is: Guitar --> Input gate, Send gate --> Input looper, after that i have all the ODs and Distortions pedals into the switcher's L1, L2 and L3 Then i go with Return gate --> Send Loop4, Output gate --> Return Loop4. WIth this chain it actually works. I don't have any noise, it's all quiet but it seems is eating a lot of signal that came out from the distortion pedals and I need to turn threshold knob almost all way down to close the gate. I don't know if it does exist any other method to connect properly the gate after the ODs/Dist pedals, using a looper switcher. Hope you can help me! Cheers!
I’ve been using the Boss NS-2 for a few years now in the four cable method and I don’t know how I went without one before. The only downside is it kills dynamics. If you want to roll off the guitar volume to clean up the tone you need to turn off the gate while you do this.
Yeah but that's just a gate thing, that's not specific to any particular gate. Someday someone will invent a magical gate that will let you do both hahaha
Gear Gods maybe a noise suppressor with a built in volume pedal that dynamically adjusts and reduces the gate as you reduce the volume 🤷🏻♂️ Does the job of being a volume pedal and a gate all in one unit the same size as a normal volume pedal. I would buy that.
@@adamalexanderray yeah I actually have entertained that idea but I'm not sure how many it would sell, probably a small number of people who play high gain that dynamically, probably not worth the R&D
@@adamalexanderrayProbably wouldn’t be that hard to do, you’d have to have a pedal attached to a double ganged pot like the gain control on the Klon Centaur and wire it so one side is the volume control for the guitar out/send jack and the other side of the pot controls the gate
I run two decimator 2s..one in front of my amp and one in my fx loop. I could've got the G string for the same price but I figured having two knobs is better than just one. I used to use two ns-2s and this has been a huge improvement.
@@McGuinty2 The Cock Blocker doesn't work like that. It works just like a Decimator G-string. It's not gating both ends. Trey knows that.. Idk why he went with that title. There's reasons to use 2 NS-2 pedals (although the NS-50 would've been better).. He could've been using pedals in front of the amp, and needed them in the loop of the NS-2, or he could've just wanted them set at different Thresholds, or to have the ability to turn one off while leaving the other on.. or he just didn't know about the "X pattern", aka the original "4CM".
I use this technique with my sentry, it's super effective. Sometime I accidentally put on my HM2 and my MT2 together and there is no noise (until I hit the strings).
I tried doing the same with the Sentry but I was getting ground loops between the fx loop and guitar-amp line... So the gate added more noise than it removed... Did you have this issue? Are you using some sort of iso transformer in your chain?
Hm. I'm thinking. I am convinced... if I would play live. What I don't do anymore. Is this thing better than using ReaFIR after the fact? I'm thinking about trying to find that out... Thanx for the video. Very informativ. And be nice to Glen... he is Canadian. :-)
Since a few years also available from a german factory called Lichtlärm. They build the "Key & Gate" Pedal, an awesome pedal, which is used by many artist on stage.
Double gating is new to me, I've used the BOSS NS-2 on my pedal board and have been looking for something else. So I'll be trying this technique as well as the Cockblocker, sadly I'll be waiting 3 months. lol
@@simon_patterson No. You can actually gate both ends with the NS-2, whereas the Cock Blocker only gates one end (the Guitar In and Out only helps the gate open and close faster.. It doesn't actually "gate" anything itself).
I think that when you put it in the signal chain it adds a different kind of noise, more annoying, until of course it takes it out. Have you noticed that or is it just me?
Yes I double gate my 5150 3 amp plus my precision drive also has gate. Set all 3 gates correctly and it sounds amazing especially if I stack overdrives
I use a TC Electronic Iron Curtain in my amps fx loop send. I use a Boss NS-2 for the input. Both hidden in my amp. I have a photo of it on my JRPowell3_music Instagram. It is a great technique. I used to run my ADA MP-1 preamp through the NS-2 at a lower volume more like a pedal level. Then sent it to my Tubeworks Realtube II preamp with stereo fx loop. I used additional Noise Reduction with the Hush in my Rocktron Replifex and also in the Intellifex. So, technically 3 gates there. I miss that rack setup. Unfortunately, my ADA MP-1s are super noisey now. I plan to revive my rack and use Synergy Syn-2 and Syn 50/50 amp.
Great video! But it would've been nice, if you would've shown the sustain of it now... Like just holding and note and seeing where the gate cuts it off
Great to see this - thanks!! I use a modeller & I use 2 noise gates in the chain the same way you’ve used this ie I placed one after the amp & the other before the amp 👌🏼 works perfect
I just use a standard old Decimator in the loop, and I don't have any problems as far a sound goes. The only problem is I have to turn it off every time I change to the clean channel
Just keep in mind that it's not really a "double gate".. just a triggered gate. If that's what you want, try the ISP Decimator G-string (or "Hum Extractor/Decimator G"), Highwind Phalanx, or Lichtlaerm Key and Gate. If you really need a "Double Gate", either get a real 4CM gate, like the Boss NS-2 or NS-1X, TC Sentry, Revv G8 (or Joyo "Legal Done"), etc.. Basically, anything with a "Send and Return", then you can wire both inputs and outputs from the guitar into the frontof the amp, and in the loop. But, if you need 2 separate gates in one pedal/box, the GUPtech SUN2 is the best, especially for the price (unless you want to go with rackmount gates, like DBX). Godspeed!
How do I combine this technique with my "regular" pedals though? (distortion/OD) etc. What about effects that are used in the FX loop normally (delay, chorus)
Wow thanks! I’ve been trying to figure out how to eliminate the softer snowy like noise coming from the amp. I guess all along I needed to use 2 noise gates or have one that can do both like this one. Thanks for helping me solve this issue!
That's awesome. The T.C. Electronics G System does that when using the 4 cable method and I always thought it would be cool if a pedal was able to do it too.
novice relative to you, so ive gigged and i own a pre amp,, but wondering when or why you'd run your pre amp when playing live to your amp unless you need a recording or something wild and even if recording id just put the pre amp off a mixer output. or maybe im just fried on this one. i only think of pre amps to use in recording for digital..
Should I use this in front of my recording interface? Fricker insisted that we use a direct box but I got one and it does very little to clean up that hum. The virtual gating of my modeling software (Podfarm or Guitar Rig) doesn’t satisfy me so I figured my next best option would be a Furman power conditioner, which is something I should probably have anyway. Podfarm actually seems to already have the dual gate system built-in, but after messing around with the settings for all these years I still can’t record guitar without serious de-noising in post. Just when I think I have it dialed in, that hum will cut through, especially when a note or chord is sustained. As the signal decays, the hum will fade in until it’s at a comparable level to not having a gate at all. I would test any gate pedal with a live amp the same way.
I don't know what your tech language means - I have super basic set up - rode nt1 against small orange amp - USA strat I just want silence ☹️ if I use a standard gate and buy the block at the same time will this destroy all noise?
Only if it has separate Thresholds... or if the Gate has a "Send and Return" (aka A "4CM" Gate). Gates like the Cock Blocker don't "gate" both ends. Idk why he advertised it like that.
I wish it was that simple! I have a G string. On my Marshall DSL 20 going into torpedo captor. When the OD comes in front, with the tiny extra gain push, the noise gate loses its sensitivity or gets over loaded i guess! Meaning when i scrub my fingers on strings, they are noisy and if i wanna kill that noise, i have to push the gate, and eventually i end up losing lots of low ends and dynamic sound. Still couldn’t figure out why…i didn’t have this issue with my ENGL iron ball and it’s built in attenuator. At least not that much.
With the ENGL Savage having a built in Gate, how would it change things with it engaged and double gating? Asking as I have a savage and debated on getting a gate to put in front of it. Didn’t know if it’s worth it or not. Thanks!
The X pattern actually gates both ends. This pedal doesn't. It's just a triggered gate, like a Zuul or ISP G-string.. There are dual gates out there (which have separate Thresholds, and can be used for both ends of one amp, or one end of two separate amps), like the GUPtech "Dual Sun" Gate, LWA "Tannhauser", Airis Effects "Hades Ultra Gate", Source Audio "EQ2", etc.
NO! That's NOT a "Double Gate" (or Dual Gate)... It's just a "triggered" (or "keyed") gate, like the ISP Decimator G-string, Lichtlaerm Key and Gate, Fortin Zuul & Zuul+, Highwind Phalanx, and many more (mostly using a THAT 4301 or 4305S circuit). Few brands offer a Dual Gate, especially in pedal form (and I'm not talking about running a Boss NS-2 or Rocktron "Guitar Silencer", using the "real" 4CM, which does work). For a "double gate", I think using 2 ISP Decimator II pedals (one in front of the amp, and the other in the loop.. Linked together with a 3.5mm TRS cable) will work best with any high gain amp, in any situation. However, if you want a Dual Gate (two separate gates in one pedal), I highly recommend The GUPtech "SUN2" Gate (aka Dual Guul). It's the best, especially for it's price (under $235). The SUN Gate is a Fortin Zuul clone, but for half the price AND it has a "Key Out" (which the Zuul doesn't have).. So, the SUN2 is like running a Fortin Zuul in front and in the loop (with separate Threshold knobs), eliminating the need for any "Key" or trigger. It also has an Isolation switch, so you can run each gate to 2 separate amps, if you need to do that. There's also the Airis Effects "Hades" Ultra Gate, the LWA Tannhauser (two Endless Blockades), and a couple other pedals, but they're expensive and can be hard to find. The only way to use a "Double Gate" with the gear in this video is by running the Cock Blocker in front of the amp, and using the ENGL's built-in Gate for the amp noise. Anyway, I hope this helps (given the very misleading title).
So I have an orange rockerverb mkiii 100w and I have a boss ns2 noise supressor I'm able to get rid of almost all of the hun using the fx loop but I still get a good amount of feedback, I have the gain and about 3/4 and I use a ts808 tube screamer and the feedback happens everytime I mute my strings it's super high pitched any recommendations?
Hey Trey, Yes..I've been using the ISP G-string for awhile now ...My question is are you switching to the Engl Savage or are you still keeping the Revv Gen 120...???
The Engl is fucking great but the Generator 120 is the greatest amp of all time. Plus they're just different flavors of awesome, so it's cool having them both around. So, hell no, keeping that 120 til I die.
@@treyxaviermusic My thoughts exactly.The Revv 120 is a beast...!! & I just got my Revv Gen 120 a few weeks ago after a 5 month wait to build it...I almost got the Savage MKII 120..But the Revv is way more Versatile...Going to swap the 6L6's to KT88s in my Revv's power section for greater bone crushing tones...Thanks Trey...!!!
What if you have an EHX Silencer? Does that work well for effects loop and the dirty pedals is you’re using the built in effects loop on the pedal instead of the amps effects loop? I use my Silencer at the beginning and have it run through the built in loop going to the front of the amp. Most of my guitars sound good except my KC Jaguar which always has feedback issues especially when using the wah.
I am new to using gates... I use it with the TC Electronic Sentry, but they have you put the guitar, Tuner, and Sentry in line and then place the fuzz, OD, distortion in the Sentry's loop. Should I be using the fuzz, OD, distortion in line and then put the effects, that are already in the amp's loop, through the Sentry's loop as well?
So, I have a 60w Fender SuperSonic that’s in an isocab offstage in our rack room.. I run it at 4 and it brings on the hiss. I’m sure they control it at the board but I have a few noisy pedals/ single coil guitars and would like to try this. My amp runs out to the DI box next to my board. How could I run this into the amp effects loop, with it being 60 feet from the stage? Seems like I’d need some kind of junction box made.
It's kinda the only way to do that.. This pedal only gates one end. Just a misleading title. With pedals, you can either get 2 ISP Decimator II's, run one on each end, then link them together... or get an actual "dual gate", like the GUPtech "Dual Sun" Gate. There's plenty of 2 channel rackmount gates, too.. but they can be pricey.
hey electrical deity my amp has an inbuilt gate (bugera 333xl infinum) and I also have a mxr noise clamp pedal and I still get lots of squeal the second im not playing, ive reduced it by not being a noob who keeps his pedals on his head anymore but its still quite bad, please advise this mere mortal on what else I can do, drives my house mates nuts when the second I stop playing unearthed riffs my amp starts screaming like an unholy demon, thanks
I used that amp for a little over a year (before getting a real JSX, then a XXXII). The Noise Clamp is meant for using with noisy distortion pedals.. Run an MXR Smart Gate in front, then crank up the amp's "gate" to 10 (and turn up the Presence to make up for any high end "tone loss"). Problem solved!
i plug my pedalboard to the front of the amp (clean channel) i have a mxr 5150 overdrive and a isp decimator, do i need to put the isp con the effects loop even though i'm on the clean channel? or do i put it infront? please i need some advice haha
Since the 5150 OD has a Gate, you could run the Decimator before the 5150, or just turn the 5150's gate off and run the Decimator right after that. If that's your only source of distortion, then there's no reason to use it in the amp's loop.
Also seems like some gate/NS can cause ground loops with certain amps. My JVM410H (noisy as hell) gets a nasty ground loop when using the Decimator II G-string, but not with a Boss NS-2.
I've used an ns2 in my chain for a while never used it this way though. I'm curious in the case of other pedals are you still using this as the first in the chain or putting like an od as first?
It's always the first thing in the chain, other than a tuner. You just want it reading the cleanest signal possible in order for it to react dynamically the way it's supposed to.
Cool I'll do some test thanks. I usually always had the od first when I usually run the ns2 but I'll try some new stuff time to route a shit ton of cables. Good content as always man. Also did you try the EQD plumes yet seems interesting for the price?
A lot of people seem to run the NS2 as a part of a chain. Either as a first or last. It actually has a feature that most people seem to forget. I use it infront of the amp and run all the other pedals (overdrive and such) in the loop of the NS2. That way the NS2 get to process all the pedals and cut their noise before the signal gets to the amp. So I plug the OUTPUT from the NS2 into the amp. The guitar I plug into the INPUT of the NS2. I use the SEND from the NS2 to go into the input of any overdrive pedal. Daisy chain that onto what ever pedal you want. The final pedal's output goes into the RETURN of the NS2. That way the NS2 does all the job. Delay I run in the amps effect loop, but other pedals go into my NS2 loop. Works like a charm.
I thought the ENGL Savage already had a noise gate in the back of the amp. Is it really necessary to have another one? What's wrong with the built in gate?
@@hellstone-project I fucking know, right? I love Glenn but people act like the cockblocker is something revolutionary but the Sentry does at least as good of a job, has more features for less than half the price and has been around some time... Never leaves my rig for sure !
Do you use a gate in your chain? Have you used the double gate technique before or are you doing it differently? Leave a comment here and then go tell Glenn you saw me touching his knob.
I use 2 gates. It's easier to control the preamp and guitar noise that way - I use a cheap mooer gate for preamp noise and an ISP Decimator for guitar noise. I used to run the Boss NS2 in the 4 cable method but it was very limited in it's useage.
So... what else is new? I thought this was something else. I've been using the double gate technique with my NS-2 for almost 20 years.
Although I just "lost" 10 mins watching the video I'm still going to tell Glenn that I saw you touching his knob. ; )
I’m playing with a HD Precision in front of the amp and my Katana has a built in behind the preamp.
It sounds good But I drown in cables
It's not double gating, it's sidechaining. There's only 1 gate.
I use a gate out in front with a gate and EQ in the loop. Total game-changer. Dead silent AND I get to further shape my tone.
Currently been saving up for my loop gate
How do i use my noise gate for the amp gain?
@@cocotico9997 effects loop..
Same...for years. An ISP Decimator II (into an EVH 5150III 100 watt Stealth) with an MXR 10 band EQ (black) and another Decimator II in the loop, linked together with the first one).
i'm gonna ask my grandma to get me one for christmas
This is called key gating. It's not 2 gates it's just using the far more dynamic input signal to "tell" the gate when to open and close. A studio technique employed for decades. I love the pedal concept though. Fortin and others have done it too. Honestly, almost no other gate design should exist at this point. Although a key filter would actually be a really good idea on these too.
You are reeealy good in explaining and showing, also video length, joking and going in depth. Also on other vid's like locking tuners and so on. Just wanted to let you know, because it's hard enuff with a granny like that...
Thanks dude, I appreciate that!
When he said "why would a bass player use a gate", that shit hurted. And it hurt even more when I realized that I have 9 pedals on my board and no noise gate.
NSG makes a gate just for bassists.
I've used many noise gates with Blackstar amps. None really worked well , either I still got noise or too sudden of a signal cut off, signal slap.... that is until I found the TC electronics Sentry... Best Gate I've come across. Works like a charm with a strat
I've been using the double gate technique for years with a Boss NS-2 and a Peavey 6505. Works great!
And why the fuck didn’t you tell anyone? You thought you can get away with this secret for the rest of your life? You do the hell do you think you are?
Yeah. As long as the gate has a built-in loop, you can make it function as a dual gate.. This thing is definitely NOT a dual gate.
Hi Trey! I bought your Relation Shapes course last week and all the scales and how to use them finally start to make sense! Great course!
Awesome dude! Glad I could be of help.
@@treyxaviermusicTrey could you tell me what the root notes are in the first mini shapes of the major modes?
The editing on this one is lit! Good job ma d00dz!
Thanks fam
Hello Trey, great video!
Have one issue that's pissin' me off: how to properly connect the noise gate into a looper switcher with 4 cables method and no amp fx/loop (i don't have fx/loop, is all in front of the amp).
My current chain is:
Guitar --> Input gate, Send gate --> Input looper,
after that i have all the ODs and Distortions pedals into the switcher's L1, L2 and L3
Then i go with Return gate --> Send Loop4, Output gate --> Return Loop4.
WIth this chain it actually works. I don't have any noise, it's all quiet but it seems is eating a lot of signal that came out from the distortion pedals and I need to turn threshold knob almost all way down to close the gate.
I don't know if it does exist any other method to connect properly the gate after the ODs/Dist pedals, using a looper switcher.
Hope you can help me!
Cheers!
I’ve been using the Boss NS-2 for a few years now in the four cable method and I don’t know how I went without one before.
The only downside is it kills dynamics. If you want to roll off the guitar volume to clean up the tone you need to turn off the gate while you do this.
Yeah but that's just a gate thing, that's not specific to any particular gate. Someday someone will invent a magical gate that will let you do both hahaha
Gear Gods maybe a noise suppressor with a built in volume pedal that dynamically adjusts and reduces the gate as you reduce the volume 🤷🏻♂️
Does the job of being a volume pedal and a gate all in one unit the same size as a normal volume pedal.
I would buy that.
@@adamalexanderray yeah I actually have entertained that idea but I'm not sure how many it would sell, probably a small number of people who play high gain that dynamically, probably not worth the R&D
I did that with expression pedal assigns on my boss got 100. Worked well.
@@adamalexanderrayProbably wouldn’t be that hard to do, you’d have to have a pedal attached to a double ganged pot like the gain control on the Klon Centaur and wire it so one side is the volume control for the guitar out/send jack and the other side of the pot controls the gate
I run two decimator 2s..one in front of my amp and one in my fx loop. I could've got the G string for the same price but I figured having two knobs is better than just one. I used to use two ns-2s and this has been a huge improvement.
Same. I've tried both. They both get the job done, but I like turning the "front" gate on and off when needed, and there's more control.
Why would you use 2 ns-2s when you can use the send and return jacks of a single ns-2 in the same way that the cock blocker works in this video?
@@McGuinty2 The Cock Blocker doesn't work like that. It works just like a Decimator G-string. It's not gating both ends. Trey knows that.. Idk why he went with that title.
There's reasons to use 2 NS-2 pedals (although the NS-50 would've been better).. He could've been using pedals in front of the amp, and needed them in the loop of the NS-2, or he could've just wanted them set at different Thresholds, or to have the ability to turn one off while leaving the other on.. or he just didn't know about the "X pattern", aka the original "4CM".
I never thought of doing this with my old DOD noise gate, I almost regret trading that thing away. It worked so well
I use this technique with my sentry, it's super effective. Sometime I accidentally put on my HM2 and my MT2 together and there is no noise (until I hit the strings).
I tried doing the same with the Sentry but I was getting ground loops between the fx loop and guitar-amp line... So the gate added more noise than it removed... Did you have this issue? Are you using some sort of iso transformer in your chain?
Hm. I'm thinking. I am convinced... if I would play live. What I don't do anymore. Is this thing better than using ReaFIR after the fact? I'm thinking about trying to find that out... Thanx for the video. Very informativ. And be nice to Glen... he is Canadian. :-)
wow i learn so much in one video about guitar noise. Thanks
Since a few years also available from a german factory called Lichtlärm. They build the "Key & Gate" Pedal, an awesome pedal, which is used by many artist on stage.
Four years later... Lol. Now there's about to be a new Lichtlaerm gate!
Double gating is new to me, I've used the BOSS NS-2 on my pedal board and have been looking for something else. So I'll be trying this technique as well as the Cockblocker, sadly I'll be waiting 3 months. lol
Isn't using the send and return functionality of your ns-2 achieving the same thing?
Yikes. I bet you were disappointed when you realized the Cock Blocker isn't a Double Gate..
@@simon_patterson No. You can actually gate both ends with the NS-2, whereas the Cock Blocker only gates one end (the Guitar In and Out only helps the gate open and close faster.. It doesn't actually "gate" anything itself).
I'm actually looking at doing it like this on a wet/dry/wet loop. I'll let you know how it goes 🙂
How? It's just a gate..
Well that's one thing I didn't know. Thanks man.
Thank you for making this. I was wondering if this was possible. Thanks for all the fish.
I think that when you put it in the signal chain it adds a different kind of noise, more annoying, until of course it takes it out. Have you noticed that or is it just me?
How about adding this noise gate to several other pedals such as distortionpedals for example.. ??
Yes I double gate my 5150 3 amp plus my precision drive also has gate. Set all 3 gates correctly and it sounds amazing especially if I stack overdrives
I use a TC Electronic Iron Curtain in my amps fx loop send. I use a Boss NS-2 for the input. Both hidden in my amp. I have a photo of it on my JRPowell3_music Instagram. It is a great technique. I used to run my ADA MP-1 preamp through the NS-2 at a lower volume more like a pedal level. Then sent it to my Tubeworks Realtube II preamp with stereo fx loop. I used additional Noise Reduction with the Hush in my Rocktron Replifex and also in the Intellifex. So, technically 3 gates there. I miss that rack setup. Unfortunately, my ADA MP-1s are super noisey now. I plan to revive my rack and use Synergy Syn-2 and Syn 50/50 amp.
Great video! But it would've been nice, if you would've shown the sustain of it now... Like just holding and note and seeing where the gate cuts it off
Great to see this - thanks!! I use a modeller & I use 2 noise gates in the chain the same way you’ve used this ie I placed one after the amp & the other before the amp 👌🏼 works perfect
I just use a standard old Decimator in the loop, and I don't have any problems as far a sound goes. The only problem is I have to turn it off every time I change to the clean channel
That's what the G-string version was made for.
Never thought I’d get cliffhanged on a RUclips video
Dude I’ve been trying to find one of these for sale.... the internet has none! Where can I buy one? Love the functionality of these
Trey, thanks so much. profoundly intelligent.
When it comes to geargods video. I always press like button before i watch the video.
I'm using decimator rack and I'm happy :)
This looks badass, I need to get one I think! Thanks for the video!
Just keep in mind that it's not really a "double gate".. just a triggered gate. If that's what you want, try the ISP Decimator G-string (or "Hum Extractor/Decimator G"), Highwind Phalanx, or Lichtlaerm Key and Gate. If you really need a "Double Gate", either get a real 4CM gate, like the Boss NS-2 or NS-1X, TC Sentry, Revv G8 (or Joyo "Legal Done"), etc.. Basically, anything with a "Send and Return", then you can wire both inputs and outputs from the guitar into the frontof the amp, and in the loop. But, if you need 2 separate gates in one pedal/box, the GUPtech SUN2 is the best, especially for the price (unless you want to go with rackmount gates, like DBX).
Godspeed!
dude, I'm barely getting into electric guitar and this helps a whole bunch...
Thanks! 🤘🏼
ISP or GUPtech is the way to go when it comes to gates.
The thing is there's still noise while playing, how do you handle that in a recording situation?
Excellent video Xavier!!! Can you try with a Kemper??
Kempers have a built-in gate (so did that ENGL). If you still need a gate in front, just use a Decimator or Smart Gate before the Kemper.
This video is really underrated. Should have way more views.
Nah.. It's not really a "Double Gate", so it's pretty misleading.
i've been a 2 gate guys since pod HD. if you set both of them just right, you can coax your guitar into feedback but it shuts up for chugs.
How do I combine this technique with my "regular" pedals though? (distortion/OD) etc. What about effects that are used in the FX loop normally (delay, chorus)
someone??
Always put your gates before all other fxs as you only want to affect the wanted signal and not the noise
After dirt pedals before modulation and time effects
Wow thanks! I’ve been trying to figure out how to eliminate the softer snowy like noise coming from the amp. I guess all along I needed to use 2 noise gates or have one that can do both like this one. Thanks for helping me solve this issue!
This one doesn't do both, though. Just use an ISP G-string (or 2 Decimator II's).
That's awesome. The T.C. Electronics G System does that when using the 4 cable method and I always thought it would be cool if a pedal was able to do it too.
novice relative to you, so ive gigged and i own a pre amp,, but wondering when or why you'd run your pre amp when playing live to your amp unless you need a recording or something wild and even if recording id just put the pre amp off a mixer output. or maybe im just fried on this one. i only think of pre amps to use in recording for digital..
How do you know if the FX loop is series or parallel?? 🎄🎶🎸
Read
That outro. So much wow. :D
Should I use this in front of my recording interface? Fricker insisted that we use a direct box but I got one and it does very little to clean up that hum. The virtual gating of my modeling software (Podfarm or Guitar Rig) doesn’t satisfy me so I figured my next best option would be a Furman power conditioner, which is something I should probably have anyway. Podfarm actually seems to already have the dual gate system built-in, but after messing around with the settings for all
these years I still can’t record guitar without serious de-noising in post. Just when I think I have it dialed in, that hum will cut through, especially when a note or chord is sustained. As the signal decays, the hum will fade in until it’s at a comparable level to not having a gate at all. I would test any gate pedal with a live amp the same way.
Frick fricker
What about the gate on the daw you use?
Awesome maaan! Thanks for sharing this! Super helpful!
I don't know what your tech language means - I have super basic set up - rode nt1 against small orange amp - USA strat I just want silence ☹️ if I use a standard gate and buy the block at the same time will this destroy all noise?
Thanks. I suspected I needed gate in my loop (I only had gate in front). Didn’t realize you could utilize one gate for both scenarios. 👍
Only if it has separate Thresholds... or if the Gate has a "Send and Return" (aka A "4CM" Gate). Gates like the Cock Blocker don't "gate" both ends. Idk why he advertised it like that.
Doesn't the American Ultra series come with noiseless pickups? Hard to believe there's still so much noise.
Ben Robson thats marketing. Single coils are single coils. Always will be noisey
@@Ottophil i was under the impression that Fender's Noiseless pickups were just stacked humbuckers voiced to sound like single coils.
I wish it was that simple!
I have a G string. On my Marshall DSL 20 going into torpedo captor. When the OD comes in front, with the tiny extra gain push, the noise gate loses its sensitivity or gets over loaded i guess! Meaning when i scrub my fingers on strings, they are noisy and if i wanna kill that noise, i have to push the gate, and eventually i end up losing lots of low ends and dynamic sound. Still couldn’t figure out why…i didn’t have this issue with my ENGL iron ball and it’s built in attenuator. At least not that much.
Excellent video
With the ENGL Savage having a built in Gate, how would it change things with it engaged and double gating? Asking as I have a savage and debated on getting a gate to put in front of it. Didn’t know if it’s worth it or not. Thanks!
I'm going to try this as soon as I can. What is the difference between double gating & X pattern?
The X pattern actually gates both ends. This pedal doesn't. It's just a triggered gate, like a Zuul or ISP G-string.. There are dual gates out there (which have separate Thresholds, and can be used for both ends of one amp, or one end of two separate amps), like the GUPtech "Dual Sun" Gate, LWA "Tannhauser", Airis Effects "Hades Ultra Gate", Source Audio "EQ2", etc.
NO! That's NOT a "Double Gate" (or Dual Gate)... It's just a "triggered" (or "keyed") gate, like the ISP Decimator G-string, Lichtlaerm Key and Gate, Fortin Zuul & Zuul+, Highwind Phalanx, and many more (mostly using a THAT 4301 or 4305S circuit). Few brands offer a Dual Gate, especially in pedal form (and I'm not talking about running a Boss NS-2 or Rocktron "Guitar Silencer", using the "real" 4CM, which does work).
For a "double gate", I think using 2 ISP Decimator II pedals (one in front of the amp, and the other in the loop.. Linked together with a 3.5mm TRS cable) will work best with any high gain amp, in any situation. However, if you want a Dual Gate (two separate gates in one pedal), I highly recommend The GUPtech "SUN2" Gate (aka Dual Guul). It's the best, especially for it's price (under $235). The SUN Gate is a Fortin Zuul clone, but for half the price AND it has a "Key Out" (which the Zuul doesn't have).. So, the SUN2 is like running a Fortin Zuul in front and in the loop (with separate Threshold knobs), eliminating the need for any "Key" or trigger. It also has an Isolation switch, so you can run each gate to 2 separate amps, if you need to do that.
There's also the Airis Effects "Hades" Ultra Gate, the LWA Tannhauser (two Endless Blockades), and a couple other pedals, but they're expensive and can be hard to find.
The only way to use a "Double Gate" with the gear in this video is by running the Cock Blocker in front of the amp, and using the ENGL's built-in Gate for the amp noise. Anyway, I hope this helps (given the very misleading title).
Great tip! What if you don’t want your reverb and delay gated?
They go in the loop AFTER the gate.
So I have an orange rockerverb mkiii 100w and I have a boss ns2 noise supressor I'm able to get rid of almost all of the hun using the fx loop but I still get a good amount of feedback, I have the gain and about 3/4 and I use a ts808 tube screamer and the feedback happens everytime I mute my strings it's super high pitched any recommendations?
Ur guitar hum from the guitar pickups
what is the better choice the Cockblocker Gate or an ISP Decimator II G-String
Hey Trey, Yes..I've been using the ISP G-string for awhile now ...My question is are you switching to the Engl Savage or are you still keeping the Revv Gen 120...???
The Engl is fucking great but the Generator 120 is the greatest amp of all time. Plus they're just different flavors of awesome, so it's cool having them both around. So, hell no, keeping that 120 til I die.
@@treyxaviermusic My thoughts exactly.The Revv 120 is a beast...!! & I just got my Revv Gen 120 a few weeks ago after a 5 month wait to build it...I almost got the Savage MKII 120..But the Revv is way more Versatile...Going to swap the 6L6's to KT88s in my Revv's power section for greater bone crushing tones...Thanks Trey...!!!
What if you have an EHX Silencer? Does that work well for effects loop and the dirty pedals is you’re using the built in effects loop on the pedal instead of the amps effects loop?
I use my Silencer at the beginning and have it run through the built in loop going to the front of the amp. Most of my guitars sound good except my KC Jaguar which always has feedback issues especially when using the wah.
Need some guidance man. I play through a PRS archon 100. Just everything is noisey asf.
Would this tame this monster?
I am new to using gates... I use it with the TC Electronic Sentry, but they have you put the guitar, Tuner, and Sentry in line and then place the fuzz, OD, distortion in the Sentry's loop.
Should I be using the fuzz, OD, distortion in line and then put the effects, that are already in the amp's loop, through the Sentry's loop as well?
So is the Cockblocker no longer available for sale?
Glad I pre-ordered this bad boy, when are they shipping out? I know your not Glenn but just curious.
Is it possible for the added cable length to reduce tone quality?
So, TL;DW = put a gate in front of the amp and another in the FX loop?
So, I have a 60w Fender SuperSonic that’s in an isocab offstage in our rack room.. I run it at 4 and it brings on the hiss. I’m sure they control it at the board but I have a few noisy pedals/ single coil guitars and would like to try this. My amp runs out to the DI box next to my board. How could I run this into the amp effects loop, with it being 60 feet from the stage? Seems like I’d need some kind of junction box made.
Very cool!
Is it possible to do that with two noise gate pedals put together, both featuring only in/out connections?
It's kinda the only way to do that.. This pedal only gates one end. Just a misleading title.
With pedals, you can either get 2 ISP Decimator II's, run one on each end, then link them together... or get an actual "dual gate", like the GUPtech "Dual Sun" Gate.
There's plenty of 2 channel rackmount gates, too.. but they can be pricey.
hey electrical deity my amp has an inbuilt gate (bugera 333xl infinum) and I also have a mxr noise clamp pedal and I still get lots of squeal the second im not playing, ive reduced it by not being a noob who keeps his pedals on his head anymore but its still quite bad, please advise this mere mortal on what else I can do, drives my house mates nuts when the second I stop playing unearthed riffs my amp starts screaming like an unholy demon, thanks
I used that amp for a little over a year (before getting a real JSX, then a XXXII). The Noise Clamp is meant for using with noisy distortion pedals.. Run an MXR Smart Gate in front, then crank up the amp's "gate" to 10 (and turn up the Presence to make up for any high end "tone loss").
Problem solved!
i plug my pedalboard to the front of the amp (clean channel) i have a mxr 5150 overdrive and a isp decimator, do i need to put the isp con the effects loop even though i'm on the clean channel? or do i put it infront? please i need some advice haha
Since the 5150 OD has a Gate, you could run the Decimator before the 5150, or just turn the 5150's gate off and run the Decimator right after that.
If that's your only source of distortion, then there's no reason to use it in the amp's loop.
Dude, sometime check it out the Malagoli pickups. They are ridiculous cheap and have great sound, i really like and i guess u should try.
The pedal name is genius, whoever came up with that should get an award 👏
Very interesting. But I guess this would fail with reverb and delay, right? You'd need to put anything like that after the second out.
There's only one Gate Output on this.. and just like with any gate, reverb and delay pedals would go after the gate, in the loop.
Lol ... grandma Glen... hahahaha ... love this channel.
Any idea where to grab one of these today?
I’m going to have to give this a try. My jvm410 is very noisy
Is it too much to ask for a similar video with the boss ns2+eq+compressor?
when you say double gating....dont you just mean 4 cable method? where it just mutes the preamp before it makes it to the power amp?
this is described in the ownersmanual that comes with the isp decimator g-string.
Awsome video thanku
How to use noise gate on a combo amp ? I have BOSSkatanaMini & thats it..would it work?...please help?
Very cool!!!
Very cool, say hi to Grandma for me...lol
How much sustain do you lose with this? The gates I've used make you lose alot of sustain.
Is there a rack mount version of this?
Good explanation.
Would this work on the jazz chorus?
how does the 4 cable method work if your running you time based pedals through the FX loop?
Also seems like some gate/NS can cause ground loops with certain amps. My JVM410H (noisy as hell) gets a nasty ground loop when using the Decimator II G-string, but not with a Boss NS-2.
Many triggered gates have "ground lift" switches to fix that.
the quality of your grandma's hand crafted wares are insane
Can’t find one for sale anywhere
I've used an ns2 in my chain for a while never used it this way though. I'm curious in the case of other pedals are you still using this as the first in the chain or putting like an od as first?
It's always the first thing in the chain, other than a tuner. You just want it reading the cleanest signal possible in order for it to react dynamically the way it's supposed to.
Although honestly, try it after a boost/OD, who knows? There's only one way to find out!
Cool I'll do some test thanks. I usually always had the od first when I usually run the ns2 but I'll try some new stuff time to route a shit ton of cables. Good content as always man. Also did you try the EQD plumes yet seems interesting for the price?
A lot of people seem to run the NS2 as a part of a chain. Either as a first or last. It actually has a feature that most people seem to forget. I use it infront of the amp and run all the other pedals (overdrive and such) in the loop of the NS2. That way the NS2 get to process all the pedals and cut their noise before the signal gets to the amp. So I plug the OUTPUT from the NS2 into the amp. The guitar I plug into the INPUT of the NS2. I use the SEND from the NS2 to go into the input of any overdrive pedal. Daisy chain that onto what ever pedal you want. The final pedal's output goes into the RETURN of the NS2. That way the NS2 does all the job.
Delay I run in the amps effect loop, but other pedals go into my NS2 loop. Works like a charm.
@@treyxaviermusic how about when dealing with a clean channel and a Big Muff?
I thought the ENGL Savage already had a noise gate in the back of the amp. Is it really necessary to have another one? What's wrong with the built in gate?
The built-in gate is great. This is a tutorial about using a gate a certain way so it didn’t make sense to use the built-in gate
How is this pedal different from the TC Sentry ?
Simple. The Sentry is better.
@@hellstone-project I fucking know, right? I love Glenn but people act like the cockblocker is something revolutionary but the Sentry does at least as good of a job, has more features for less than half the price and has been around some time... Never leaves my rig for sure !
But what does that do to your REVERB and/or DELAY?
as long as it's AFTER the gate, it does nothing
Can I gate Ryan Bruce?
Sir, you do have a great innate teaching ability. Thanx! (now, can I replicate that with BIAS?)
So if I only have one fx loop and another pedal that has to be plugged into the preamp to affect both channels how would I create a chain
ISP Decimator G String got 2 output and input so it can gate the guitar and the amp simultaneously.