Can you share a link for the reinforcement fabric? We normally purchase from Reynolds or The Engineer Guy and I can't find it on either of their web sites.
Hello! thank you for sharing. Is it a glue usable either with addiction and condensation curing? Is it a kind of acetic silicon like the sealant used for windows? thanks for kind reply and for teaching new tecniques.
Dying for you guys to make a video showing a seamless brush on one part mold of an urn, or something hollow like an ice bucket. No roto/slush casting, because the inside needs to be and exact replica of the original. Trying to make casting easy in a one step seamless pour for production.
Hello! I have a project. I'd like to create a silicon membrane to apply into a silicon chamber, to create two separate chambers. To the left a closed chamber, with a small hole, that allow water to go inside. To the right another chamber, closed. Putting water pressure on the left one, the membrane have to curve on the right chamber, pushing the air in a smaller space. It this glue suitable for this purpose? Could it stand to a 4 bar pressure, or it will lacerate?
Let's say I made a silicone cup. Parts of the cup had silicone that peeled off making it not smooth. Is there a process to cut that non-smooth part out and brush on silicone to "fix it? What should I use?
That's pretty funny demonstrating a so called invisible repair on a sample that has creases and striations in the object. Next time do a sample on a smooth piece and we will see just how invisible the repair is!
Where can I buy the wide cell structure active reinforcement fabric? Thank you in advance.
This adhesive works great. We had to glue a silicone snake back together that ripped on set. This stuff held up great and worked with no issues.
Great to hear!
⭐⭐⭐⭐⭐This demo was very helpful. I hope to use this technique to same some valuable molds.⭐⭐⭐⭐⭐
.
great video, very helpful. please provide a link to the mesh material. It's not in an obvious place on the website, thanks
Thanks for watching. I suggests contacting your closest distributor. www.smooth-on.com/distributors/
Clever use of the paper cup
Same question as @Brett Hays was asking, can you share a link to the reinforcement fabric, I can't find online.
Me too, I can not find the fabric: (
Can you link to the product?
What is that reservoir you're using for the alcohol there? That thing is neat.
These are manufactured by Justrite www.justritemfg.com/products/safety-cans-and-containers/
Can you share a link for the reinforcement fabric? We normally purchase from Reynolds or The Engineer Guy and I can't find it on either of their web sites.
They have it in stock but, not on the site!
Could you guys do a video on how to make the canonic jars from the mummy, using your products?
Great idea Esteban. Don't forget to subscribe! 😀
Sorry, I meant Canopic jars from the 1999 the mummy? I see the jars on your website and was wondering how you made them?
Smooth-On will do
Can you name one of your online distributor that sells the reinforcement fabric you mentioned in your video? Thank you.
Thank you for watching. Our Distributor Reynold Advanced Materials carries reinforcement fabric.
Hello! thank you for sharing. Is it a glue usable either with addiction and condensation curing? Is it a kind of acetic silicon like the sealant used for windows? thanks for kind reply and for teaching new tecniques.
It can be used with either type of silicone mold rubber, addition or condensation cure. Thanks for watching, and don't forget to subscribe! :)
Could you show how Task 21 works and what it is used for?
We'll add it to the list! And don't forget to subscribe! :)
Thank you so much.
Dying for you guys to make a video showing a seamless brush on one part mold of an urn, or something hollow like an ice bucket. No roto/slush casting, because the inside needs to be and exact replica of the original.
Trying to make casting easy in a one step seamless pour for production.
Great idea! We will let the video team know.
Hello! I have a project. I'd like to create a silicon membrane to apply into a silicon chamber, to create two separate chambers. To the left a closed chamber, with a small hole, that allow water to go inside. To the right another chamber, closed. Putting water pressure on the left one, the membrane have to curve on the right chamber, pushing the air in a smaller space. It this glue suitable for this purpose? Could it stand to a 4 bar pressure, or it will lacerate?
Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
Do you buy the cloth and the proxy in a arts-n-craft store or a hardware store?
Thanks for watching Doomafaki. You can find a full list of Smooth-On distributors here - www.smooth-on.com/distributors/
What can I dissolve sil poxy. into a liquid? to put to work
Coleman camp fuel works well for that.
@@smoothonWhat is it?
@@sunannoitttt It is Naptha which is a solvent.
Let's say I made a silicone cup. Parts of the cup had silicone that peeled off making it not smooth. Is there a process to cut that non-smooth part out and brush on silicone to "fix it? What should I use?
Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
@@smoothon I tossed it. The mold needed to be redone. I'm new at this. Thanks!
Will it bond to Velcro or nylon webbing
Yes, you can use it to adhere Velcro to silicone
Why can I not find the reinforcement cloth on your website?
Contact your nearest Reynolds Advanced Materials for this product. www.reynoldsam.com/location/
Me too, I can not find the fabric: (
Can you link to the product?
You can get this fabric from reynoldsam.com. They don't list it on their site, but if you call them, they can get you pricing.
A Batman Cowl 👌
Mold a garage kit figure
BloodyKylie nice idea! Thanks for watching!
Smooth-On what polyurethane is best to cast figures?
@@smoothon I can not find the fabric: (
Can you link to the product?
That's pretty funny demonstrating a so called invisible repair on a sample that has creases and striations in the object. Next time do a sample on a smooth piece and we will see just how invisible the repair is!
Mold an ironman helmet!!!!
Love it! Thanks for the suggestion! And don't forget to subscribe! :)