New Ikea PAX Wardrobe with sliding doors Assembly Instructions Part : 1

Поделиться
HTML-код
  • Опубликовано: 27 авг 2024
  • New Ikea PAX Wardrobe with sliding doors Assembly Instructions Part : 1. This video provides detailed assembly instructions for the new Ikea PAX wardrobe with sliding doors. It covers everything from unboxing the pieces to organizing the hardware to step by step assembly of the wardrobe. The video also includes helpful tips and tricks to make the assembly process as smooth and easy as possible. Whether you're a seasoned DIY pro or a first-time furniture builder, this video is the perfect guide for putting together your new PAX wardrobe with sliding doors.
    In part one I will explain how to assemble the Ikea pax wardrobe frame. Part two top and bottom rails for new Ikea pax sliding doors and how to join Ikea PAX wardrobe frames together. Part three is everything about new Ikea pax sliding doors from assembly to door alignment with the pax frames. Let me know in the comments how your new Ikea pax wardrobe with new door assembly goes.
    If you like to support my channel:
    Viewers can purchase a Super Thanks on a video to show their appreciation, and then post a colourful comment. Thank you ;)
    / ppflatpack
    Thank you for your support.
    **Tools I'm using **
    Small electric screwdriver
    amzn.to/2AYddCK
    Bigger drill and screwdriver all in one
    amzn.to/2RJMJiP
    For more tools for furniture assembly or general DIY adventures.
    www.amazon.co....
    Music:
    Epidemic Sound
    www.epidemicso....
    Some of the links above are affiliate links, where I receive a small commission if you click on the link and purchase an item. There is no extra cost to you but it helps me a lot. You don't have to do so, but it does help fund these videos that I hope to bring value to you.
    Here is my stuff :
    www.ppflatpack....
    ppflatpack@gmail.com
    / ppflatpacklo. .
    / ppflatpacklo. .
    / ppflatpack
    / ppflatpack

Комментарии • 25

  • @deanie321
    @deanie321 4 месяца назад +1

    Really great demonstration on how to build the PAX wardrobe. Completed part 1 for two PAX wardrobes this made it so much easier than reading the Manual. Top job. Part 2 and 3 to go...

    • @PPFlatPack
      @PPFlatPack  4 месяца назад

      Thank you for watching

  • @cminuets6859
    @cminuets6859 9 месяцев назад

    Last week I watched your video about installing the pax wardrobe up right I cannot thank you enough because without your tuition I would have been stuck it was the most challenging thing I have put together that I pulled my back muscle. I will not be building theses again unless its for my home.

  • @jergervasi3331
    @jergervasi3331 11 месяцев назад +1

    Your videos are the BEST! Thank you!!!

    • @PPFlatPack
      @PPFlatPack  11 месяцев назад

      Thank you for watching

  • @paulstead5534
    @paulstead5534 Год назад +1

    Thanks

  • @rizal8102
    @rizal8102 Год назад +2

    I just finished assembling an ikea pax wardrobe with sliding door. It's just disappointed with the new sliding door frame design. The left and right side gaps are very large, around 5mm and are not equipped with rubber/fur seals. The material is also thinner.

    • @lotteyeung4610
      @lotteyeung4610 Год назад

      totally agree with you!

    • @xtheme772
      @xtheme772 Год назад

      Same here! Did you find a solution? These gaps are pretty large

  • @emmaturner2558
    @emmaturner2558 2 месяца назад

    At 7:09 fixing the front panel - does this need to be in the second set of holes (so slightly recessed back) if you are attaching sliding doors?

  • @jergervasi3331
    @jergervasi3331 8 месяцев назад

    I will need to attach my PAX to the wall. You didn't show that part. Will I need to cut my baseboards so the PAX sits flush against the wall? Thanks!

  • @ninjahhh468
    @ninjahhh468 Год назад +1

    Can these new pax wardrobe be height adjusted the same as the old type?

    • @PPFlatPack
      @PPFlatPack  Год назад +1

      Didn't try to do with these new Pax wardrobes but possibly few centimetres from the bottom. There is new ending aluminum panels on the both sides now all the way down that could be challenging to cut need to see the wardrobe again and properly check the bottom rail it seem to be wider tan the old one so need to measure safe space to cut properly for the doors to slide without problems. Sorry don't have 100% answer for your question yet but thank you for new video idea.

  • @rotarustelian
    @rotarustelian 8 месяцев назад

    Hi , my ceiling is 238 , will I be able to add the sliding doors ? Thank you

    • @piscean81
      @piscean81 6 месяцев назад

      Yes, you should be, although you might need to assemble the frames upright rather than horizontally.

  • @richiefe4895
    @richiefe4895 Год назад

    Hi, thanks for the videos and all of your help. I intend to buy 236 high wardrobes and my floor to ceiling height is 240. Will I have room to add the sliding doors with just 4cm and building upright?

    • @PPFlatPack
      @PPFlatPack  Год назад

      Yes 4cm is enough space just need to build the Pax frames upright

  • @AllSport4U
    @AllSport4U 10 месяцев назад

    Save it me more 💰💰💰💰💰💰💰

  • @tkdally
    @tkdally Год назад

    How stable and safe is it not to secure this to the wall (or the 200cm tall version in my case)? I don't have children or pets so I don't need to worry about them being climbed on. I would prefer not to attach them to the wall.

    • @PPFlatPack
      @PPFlatPack  Год назад

      If you have the 58cm deep pax wardrobe than is fine without securing to the wall

  • @ranolinst4690
    @ranolinst4690 Год назад

    Part 2 please???

    • @PPFlatPack
      @PPFlatPack  Год назад +2

      Part 2 this week Saturday around 8am. Part 3 week after same time sorry about waiting still working on these 2 last parts.

  • @weiwang6561
    @weiwang6561 Год назад

    Thanks so much for the instructions! Where can we find part 2 and 3?

    • @PPFlatPack
      @PPFlatPack  Год назад

      Part 2 this week Saturday around 8am. Part 3 week after same time sorry about waiting still working on these 2 last parts.