Thank you I bought the same wardrobe I did the boxes well. But got stuck with doors. And after searching for a while I found your video. You are life saver I couldn’t do it without your video as you showed it’s become so easy. 😊 I’m glad you made the video with all information.
"Ikea should include a link to your channel in the assembly guidelines paper. It was not shown precisely, and I was unsure about what I had assembled. It looks pretty much the same. Thanks, buddy."
Brilliant job. The wardrobe looks amazing. Did you push it to the side wall after installing? And was it still intact without affecting the sliding doors?
hey man! i am struggling with the steps you took from 6:30 till 7:00 in this video. can you please share the exact steps you took to secure this rubber strip and metal panel to the door? will it always be the outside door?
@@kayblossom8505 Yes! totaly. You can use the wardrobe without doors. The pax wardrobe is used in open closets as well that don't use doors. Then, if you decide to put them, you can. The part3 of the series shows you how to assemble the drawers ;)
Thanks for your video. This is very clear, but unfortunately it did not work out well for me. My problem is that after hanging I have an opening at both top corners. Can you help me please🙏
I bought a similar wardrobe but i am still not getting how to place the metal with that glued rubber thingy on the outer door. There is no point given. Do we have to screw it ourselves?
@omarshaikh1 Ok I think I found a way to fix it. I hadn't attached the aluminum bar in the right direction. The right way is similar to this video : ruclips.net/video/MWh20ET7gg0/видео.htmlfeature=shared&t=337 . For me it works :)
Ana, verifique se as rodas estão as duas na mesma calha. As rodas no suporte pequeno são da porta interior (em baixo) e as rodas do suporte maior são da porta exterior (em cima). Se bao conseguir amanha mostro como estao as minhas num short 😊
Thank you
I bought the same wardrobe I did the boxes well. But got stuck with doors. And after searching for a while I found your video. You are life saver I couldn’t do it without your video as you showed it’s become so easy. 😊
I’m glad you made the video with all information.
Thank you, for watching and commenting the appreciation. That gives me reason to continue uploading videos 😊 i’m glad i could help.
Life saver, the ikea manual was too confusing this helped a lot
Thank you!
Thank you very much,
We didn’t know how to do it but you showed us exactly how it works.
Again thank you
"Ikea should include a link to your channel in the assembly guidelines paper. It was not shown precisely, and I was unsure about what I had assembled. It looks pretty much the same. Thanks, buddy."
Thank you very much for your kind comment! I really appreciate it
Thank you for taking the time to make this video, it was helpful.
Sooo helpful when it came to adding top/bottom doors! Thank you so much!! :) saved the day ❤️
Glad it helped!
Thank you Alexandre ❤ Your movie was very helpful for me. Much more than IKEA's paper manual. 👍🌷🌻Alexandra.
Glad it was helpful!
Perfect installation and explanation, thank you
🌷👍🙏
You're very Welcome. Thanks for watching and commenting. It really means a lot
You saved us! Thank you!
Thank you for commenting 😉
Wow you did a great job thank you :)
Thank you very much!
Thank youu!!!! you saved my life
You’re welcome! Glad I could help 😉
Perfecto, gracias!!
😁
Super😊
Thankyou. Great help
Glad it helped
Brilliant job. The wardrobe looks amazing. Did you push it to the side wall after installing? And was it still intact without affecting the sliding doors?
No. I left it in there. Works perfectly
it helped a lot
Boa! Obrigado pelo teu comentário 😉
Thank you so much 🙏🙏🙏
You’re very welcome ☺️
Thanks!
Menuda ostia te has dado colega. Muchas gracias por compartir el vídeo. Muy útil.
De nada 😉
Merci
The riam! Merci pour votre message 😊
Thank you❤
No problem
Video was helpful. How high is the ceiling of the room?
250mm
Hey, what is your ceiling height? Our room is about 240/241 and I wonder if this wordrobe will fit. Thanks:)
Is 250. 240 is just enough but you will have some difficulties building it laying down. Best option for you is to build the wardrobe already in place
Hey Alexandre, is that a finnish lapphund you got there? Cute dog 🐶
No :) My best friend is a German Spitz . Thank you!
hey man! i am struggling with the steps you took from 6:30 till 7:00 in this video. can you please share the exact steps you took to secure this rubber strip and metal panel to the door? will it always be the outside door?
Hello Omar! thanks for reaching out. Watch the replies to the other comments. In one of them i explain how ;)
@@AlexandreMMadeira hey man! which comment would that be?
nice tutorial. what are the dimensions of the wardrobe?
Thank you very much! Mine has 150 cm wide and 56 dip
If i put my inserts in and attach sliding doors at a later date, would it be difficult to attach them?
what inserts are you referring to?
@@AlexandreMMadeira like the shelves and drawers x
@@kayblossom8505 Yes! totaly. You can use the wardrobe without doors. The pax wardrobe is used in open closets as well that don't use doors. Then, if you decide to put them, you can.
The part3 of the series shows you how to assemble the drawers ;)
@@AlexandreMMadeira aw thank you 😊
Thanks for your video. This is very clear, but unfortunately it did not work out well for me. My problem is that after hanging I have an opening at both top corners. Can you help me please🙏
Same problem here..... top inner door leftcorner a huge gap can you help ?
Did you fix it ? Same problem here .. @@tomwesterhof1068
There’s an accessory in the box to close the gap
Just one of the doors should have a gap and that gap is filed with a piece of plastic that comes in the box
I removed the back wall, then positioned the cabinet completely perpendicular and reinstalled the back wall. Problem solved!
Hi! Does IKEA sells the male to female screws?
They come with the wardrobe ;)
I bought a similar wardrobe but i am still not getting how to place the metal with that glued rubber thingy on the outer door. There is no point given. Do we have to screw it ourselves?
Have you found out how to do it?
@@AlexandreMMadeira not yet. That thing is still kept aside
@@snehasamanta7428i made a video for you. I hope it helps 😉
@@snehasamanta7428 hey. did you manage to place this metal and rubber thing? i am struggling with that part too.
@omarshaikh1 Ok I think I found a way to fix it. I hadn't attached the aluminum bar in the right direction. The right way is similar to this video : ruclips.net/video/MWh20ET7gg0/видео.htmlfeature=shared&t=337 . For me it works :)
That "lock the doors in place" is for adjustment.
You totally right! I realised that afterwards
Tou com problema com a porta , não ficam direitas
Ana, verifique se as rodas estão as duas na mesma calha.
As rodas no suporte pequeno são da porta interior (em baixo) e as rodas do suporte maior são da porta exterior (em cima).
Se bao conseguir amanha mostro como estao as minhas num short 😊
How to un-click the door from bottom system?
No idea. Never had to take them out
Ikea manual what ? thanks from france
Merci beaucoup ☺️